Contribute
Register

Can't boot installer using clover and createmediainstall (Lenovo Ideapad 13IKB)

Status
Not open for further replies.
I tried the installer on My HP x360 pavillion laptop and it boots just fine.
Im trying to install on Lenovo Laptop with OEM Windows installed. It has SSD, and coffee lake i7-8550u, intel uhd 620.
 

Attachments

  • EADB23AF-92E6-4622-BC5C-314CE1F1CCDB.png
    EADB23AF-92E6-4622-BC5C-314CE1F1CCDB.png
    1.6 MB · Views: 54
  • CLOVER.zip
    1.7 MB · Views: 68
JohnMacDoe said:
I tried the installer on My HP x360 pavillion laptop and it boots just fine.
Im trying to install on Lenovo Laptop with OEM Windows installed. It has SSD, and coffee lake i7-8550u, intel uhd 620.
Click to expand...

How long did you wait?
Keep in mind booting the installer from USB is not quick.
Using a USB2 stick?

Also... See if you can boot single user mode or safe mode.
And check your BIOS options...

XCPM should be recognized automatically, but in case macOS does not recognize your CPU as XCPM capable, try with config.plist/KernelAndKextPatches/KernelXCPM=true.
 
@RehabMan
Its still the same problem since the first post. I can't wait since It shows this error then reboots. I cant boot on safe mode, on single user I can type on it. I've checked my bios option nothing much to do.

These are all the information so far.

This is how the error happens:

https
://youtu.be/4JQbgkAHLEI

attached is my boot options, my clover and the screenshot of the KP before it reboots if you can't check the video.

The installer eventually boots on my previous build when it was left on boot loop.

Specs:
Lenovo Ideapad 320s-13IKB
i7-8550u
Intel UHD 620
512 GB M.2 PCie SSD
 

Attachments

  • CLOVER.zip
    1.7 MB · Views: 58
  • 6C3E6181-330F-44CA-ACA8-4CA44395057A.png
    6C3E6181-330F-44CA-ACA8-4CA44395057A.png
    1.5 MB · Views: 86
  • 28001330_1867258913293225_1590798795_n-2.jpg
    28001330_1867258913293225_1590798795_n-2.jpg
    70.3 KB · Views: 52
  • 28124751_1867258843293232_967745677_o-2.jpg
    28124751_1867258843293232_967745677_o-2.jpg
    1.8 MB · Views: 55
Last edited:
JohnMacDoe said:
@RehabMan
Its still the same problem since the first post. I can't wait since It shows this error then reboots. I cant boot on safe mode, on single user I can type on it. I've checked my bios option nothing much to do.

These are all the information so far.

This is how the error happens:

https
://youtu.be/4JQbgkAHLEI

attached is my boot options, my clover and the screenshot of the KP before it reboots if you can't check the video.

The installer eventually boots on my previous build when it was left on boot loop.

Specs:
Lenovo Ideapad 320s-13IKB
i7-8550u
Intel UHD 620
512 GB M.2 PCie SSD
Click to expand...

I don't see any photo of a KP.

You might try without the NVMe SSD, just in case it is causing the problem.
Also, try without the WiFi card installed.
Also, experiment with BIOS settings (you will need to read the help for each to decide if it is something that might cause a problem).

Note that your problem certainly seems graphics related, so you might try with an invalid FakeID. Change it in the Clover GUI just in case you are confused and are actually not booting from the EFI/Clover you think you are.
 
JohnMacDoe said:
by trying to boot on hdd laptop? I already tried it and it boots.
Click to expand...

No. By removing the NVMe SSD and/or replacing it with a SATA M.2 SSD.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top