Can't boot from my SSD EFI

[Julien-Sombre]

I've recently installed a M2/nvme SSD (crucial P1 1To) on my computer (Gigabyte GA-H97-D3H). I cloned my Mojave system to the drive. Everything worked fine and booting correctly using Clover but I can't boot from the drive's EFI, I can't find it in the BIOS… So for now I'm using an EFI from a different drive.

Is there something special I need to boot properly from my SSD EFI? BIOS settings to change?


note : I had to install "NvmExpressDxe.efi" to see my SSD in Clover.

 

[eduardomacedo]

I'm planning to buy the Crucial P1 500GB, thanks for sharing that it worked for you!

About the EFI problem, have you manually copied the EFI folder over the new drive?

Here's how to do it:
- Open Clover Configurator
- Mount the old drive EFI partition
- Mount the new drive EFI partition
- Copy the EFI folder from the old drive to the new drive
- Now you should be able to boot from the new drive

Let me know if that helps