Cannot install times out at System Update

[herpderpingson]

Greetings everyone. I am attempting to put together my first hackintosh and I am having some trouble.

First the specs:

Intel Core i7-3770 3.4GHz Quad-Core Processor
Gigabyte GA-Z77X-UD5H ATX LGA1155 Motherboard
Mushkin Blackline 16GB (2 x 8GB) DDR3-1600 Memory
Crucial V4 256GB 2.5" Solid State Disk
Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive x2
EVGA GeForce GTX 760 2GB Video Card


Now then, here's the issue:

panic(cpu 0 caller 0x27xx10): "Pmap_steal_memory"@/usr/local/src/xnu-1504.15.3/osfmk/vm/vm_resident.c.757
Debugger called: <panic>
Backtrace (CPU0), Frame : Return Address (4 potential args on stack)
0x10bdf8 : 0x21b837 (0x5d7410 0x10be2c 0x223ce1 0x0)
0x10be48 : 0x27cc10 (0x593bcc 0x4c230000 0x4c24000 0x1000)
0x10be98 : 0x262e61 (0x1000 0x593c68 0x84ab44 0xa8)
0x10beb8 : 0x6254bc (0x593c77 0x10bedc 0x4 0x84ab48)
0x10bef8 : 0x624993 (0x10bf2c 0x10bf28 0x847c0f 0x10bf8c)
0x10bf38 : 0x623fa5 (0x58f611 0x8221a8 0x4 0x860344)
0x10bf68 : 0x2b1c90 (0x599e62 0x10bf8c 0x4 0x62457f)
0x10bf98 : 0x29b119 (0x1 0x991000 0x4 0x911000)
0x10bfe8 : 0x2a2a5b (0x991000 0x0 0x2a2a31 0xcb000008)

BSD process name corresponding to current thread: Unknown

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 10.8.0: Thu Sep  6 11:44:17 AST 2012; root:xnu-1504.15.3/BUILD/obj/RELEASE_I386

System uptime in nanoseconds: 0

And then it stops. It's still stuck there now. I am using the Ivy-Bridge version of iboot while attempting to install Snow Leopard.

Any help is appreciated, thank you for your time.

 

[Going Bald]

Precisely where in the process does the KP occur?
When you boot with iBoot?
When you boot the OS X installer?
When you reboot after installation?

 

[totenkopf4]

Greetings everyone. I am attempting to put together my first hackintosh and I am having some trouble.

First the specs:

Intel Core i7-3770 3.4GHz Quad-Core Processor
Gigabyte GA-Z77X-UD5H ATX LGA1155 Motherboard
Mushkin Blackline 16GB (2 x 8GB) DDR3-1600 Memory
Crucial V4 256GB 2.5" Solid State Disk
Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive x2
EVGA GeForce GTX 760 2GB Video Card


Now then, here's the issue:

panic(cpu 0 caller 0x27xx10): "Pmap_steal_memory"@/usr/local/src/xnu-1504.15.3/osfmk/vm/vm_resident.c.757
Debugger called: <panic>
Backtrace (CPU0), Frame : Return Address (4 potential args on stack)
0x10bdf8 : 0x21b837 (0x5d7410 0x10be2c 0x223ce1 0x0)
0x10be48 : 0x27cc10 (0x593bcc 0x4c230000 0x4c24000 0x1000)
0x10be98 : 0x262e61 (0x1000 0x593c68 0x84ab44 0xa8)
0x10beb8 : 0x6254bc (0x593c77 0x10bedc 0x4 0x84ab48)
0x10bef8 : 0x624993 (0x10bf2c 0x10bf28 0x847c0f 0x10bf8c)
0x10bf38 : 0x623fa5 (0x58f611 0x8221a8 0x4 0x860344)
0x10bf68 : 0x2b1c90 (0x599e62 0x10bf8c 0x4 0x62457f)
0x10bf98 : 0x29b119 (0x1 0x991000 0x4 0x911000)
0x10bfe8 : 0x2a2a5b (0x991000 0x0 0x2a2a31 0xcb000008)

BSD process name corresponding to current thread: Unknown

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 10.8.0: Thu Sep  6 11:44:17 AST 2012; root:xnu-1504.15.3/BUILD/obj/RELEASE_I386

System uptime in nanoseconds: 0

And then it stops. It's still stuck there now. I am using the Ivy-Bridge version of iboot while attempting to install Snow Leopard.

Any help is appreciated, thank you for your time.

Herpderp....

Is this a OSX in a VM..... virtual Machine scenario...

Also how is your DVD drive connected to the hardware - USB DVDs not supported must be direct to the motherboard via SATA Cable.

 

[herpderpingson]

Herpderp....

Is this a OSX in a VM..... virtual Machine scenario...

Also how is your DVD drive connected to the hardware - USB DVDs not supported must be direct to the motherboard via SATA Cable.

This is not in a VM this is a 'pure install'. The DVD drive is connected via SATA cable.

Precisely where in the process does the KP occur?
When you boot with iBoot?
When you boot the OS X installer?
When you reboot after installation?

This occurs when I boot the OS X installer.

 

[totenkopf4]

This is not in a VM this is a 'pure install'. The DVD drive is connected via SATA cable.




This occurs when I boot the OS X installer.

Herpderp...


Can you take a picture of the DVD and post it - pic of the DVD Disk you are using to install.

Please.

 

[herpderpingson]

Herpderp...


Can you take a picture of the DVD and post it - pic of the DVD Disk you are using to install.

Please.

Here it is.

 

[herpderpingson]

Looking through the BIOS again I've found the HPET and I am only given the options to enable or disable it. (i.e. no 64-bit option) :\

 

[herpderpingson]

Okay life is stupid. THE FIX: running the install with verbose and nothing else. Now the new problem is that it is not detecting my SSD.

 

[herpderpingson]

Never mind fixed that, will let y'all know when it is up and running.

 

[Adrian B]

What was the fix?