Contribute
Register

Cannot get UHD 630 acceleration to work

Status
Not open for further replies.
OrionDB5 said:
I'm sorry, I have WhateverGreen.kext 1.2.3 installed too, I forgot to mention it in the list.

This is the correct list:

ACPIBatteryManager.kext
AppleALC.kext
AppleBacklightInjector.kext
BrcmFirmwareData.kext
BrcmPatchRAM2.kext
FakePCIID_Broadcom_WiFi.kext
FakePCIID.kext
FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC_GPUSensors.kext
FakeSMC_LPCSensors.kext
FakeSMC.kext
Lilu.kext
USBInjectAll.kext
VoodooPS2Controller.kext
WhateverGreen.kext
XHCI-300-series-injector.kext
Click to expand...

I see that you have the same hw configuration as mine. Getting UHD630 to work was a PITA but with RehabMan's help, I got it to work.
These are the steps I followed to get it working:
  • Follow this guide to get the latest copy of config_UHD630.plist (make sure you follow the instructions for switching to Coffee Lake branch in the guide).
  • The linked guide will also fix your low backlight issue as it did for me.
  • Make sure you download install the latest versions of WhateverGreen.kext(was updated just yesterday) and Lilu.kext from their respective githubs. Also make sure to fix permissions and rebuild kextcache.
  • Make sure you followed this guide to disable the nvidia 1050TI.
With this you'll have full acceleration. Good luck.
 
Last edited:
RehabMan said:
Attach full PR files (use invalid ig-platform-id so you can boot).
Click to expand...
Attached.

parasthakur37 said:
I see that you have the same hw configuration as mine. Getting UHD630 to work was a PITA but with RehabMan's help, I got it to work.
These are the steps I followed to get it working:
Follow this guide to get the latest copy of config_UHD630.plist (make sure you follow the instructions for switching to Coffee Lake branch in the guide).
The linked guide will also fix your low backlight issue as it did for me.
Make sure you download install the latest versions of WhateverGreen.kext(was updated just yesterday) and Lilu.kext from their respective githubs. Also make sure to fix permissions and rebuild kextcache.
Make sure you followed this guide to disable the nvidia 1050TI.
With this you'll have full acceleration. Good luck.
Click to expand...

Thank you for the suggestion, I will try following your steps.
 

Attachments

  • debug_12007.zip
    5.1 MB · Views: 100
OrionDB5 said:
Attached.
Click to expand...

Quite a few KPs in panic_logs. Do those represent the panic/reboot you have (you need to check the times, to correlate with boot attempts).

And you might want to take AppleALC.kext out of the mix.

It could be that the ig-platform-id you're using is not a good choice. Try others...

The guide plists (in beta branch) use 0x3e9b0000.

Your SSDT-PNLF is not up-to-date.

Or are you trying to do KBL spoof? If so, why the KPs in the CFL kexts?
 
RehabMan said:
Quite a few KPs in panic_logs. Do those represent the panic/reboot you have (you need to check the times, to correlate with boot attempts).[...]

Or are you trying to do KBL spoof? If so, why the KPs in the CFL kexts?
Click to expand...


I tried again without KBL spoof and when you requested PR files I switched back to KBL spoof. Had some KPs while switching.
Do you suggest trying to get native CFL or spoofing KBL? I think the obvious choice is to get it to be as native as possible but browsing around and reading threads it seems that native CFL is still problematic.


RehabMan said:
And you might want to take AppleALC.kext out of the mix.

It could be that the ig-platform-id you're using is not a good choice. Try others...

The guide plists (in beta branch) use 0x3e9b0000.

Your SSDT-PNLF is not up-to-date.
Click to expand...

I will try without AppleALC and I will update SSDT-PNLF following this guide. After that I will try different ig-platform-ids, will report back as soon as I make some progess.
Thanks for the help.
 
Last edited:
OrionDB5 said:
I tried again without KBL spoof and when you requested PR files I switched back to KBL spoof. Had some KPs whilyoue switching.
Do you suggest trying to get native CFL or spoofing KBL? I think the obvious choice is to get it to be as native as possible but browsing around and reading threads it seems that native CFL is still problematic.
Click to expand...

Either one (KBL or SKL)... your choice. But each requires a very specific setup.

I've seen some reports of native CFL working on this site (complete with ioreg that proves it), so it is possible...
 
Also having the same issue here - I was able to boot into High Sierra (without acceleration) but since Mojave, I get a reboot from the error in OP.

'IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0'

So far I've tried the backlight fix suggested as well as using rehabmans UHD630 clover config.
 
andythedev said:
Also having the same issue here - I was able to boot into High Sierra (without acceleration) but since Mojave, I get a reboot from the error in OP.

'IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0'
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
andythedev said:
Not reporting a problem - just confirming that I'm experiencing the same
Click to expand...

But without PR files, no one can tell what you're actually doing.

It would also be nice if someone could get a full framebuffer dump (WhateverGreen.kext -igfxdump). Then you'll have a full list of ig-platform-id values to try (not to mention information on the connectors and memory requirements of each).
 
Last edited:
RehabMan said:
But without PR files, no one can tell what you're actually doing.

It would also be nice if someone could get a full framebuffer dump (WhateverGreen.kext -igfxdump). Then you'll have a full list of ig-platform-id values to try (not to mention information on the connectors and memory requirements of each).
Click to expand...

Here's the clover when booting High Sierra. I can't seem to find the WhateverGreen graphics dump on the root of the system or EFI partition.

Code: 
0:100  0:100  MemLog inited, TSC freq: 2304316000
0:100  0:000  CPU was calibrated with RTC
0:100  0:000 
0:100  0:000  Now is 24.9.2018,  21:3:58 (GMT)
0:100  0:000  Starting Clover revision: 4658 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.13.6 | XCODE: 9.4.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,25E37508-8EE6-4673-9E37-F8014F4C833A,0x28,0x64000) @67BB0418
0:100  0:000  SelfDirPath = \EFI\CLOVER
0:102  0:001  === [ Get Smbios ] ========================================
0:102  0:000  Type 16 Index = 0
0:102  0:000  Total Memory Slots Count = 2
0:102  0:000  Type 17 Index = 0
0:102  0:000  SmbiosTable.Type17->Speed = 2667MHz
0:102  0:000  SmbiosTable.Type17->Size = 4096MB
0:102  0:000  SmbiosTable.Type17->Bank/Device =  DIMM A
0:102  0:000  SmbiosTable.Type17->Vendor = 802C0000802C
0:102  0:000  SmbiosTable.Type17->SerialNumber = 1C5311B4
0:102  0:000  SmbiosTable.Type17->PartNumber = 4ATF51264HZ-2G6E1  
0:102  0:000  Type 17 Index = 1
0:102  0:000  SmbiosTable.Type17->Speed = 2667MHz
0:102  0:000  SmbiosTable.Type17->Size = 4096MB
0:102  0:000  SmbiosTable.Type17->Bank/Device =  DIMM B
0:102  0:000  SmbiosTable.Type17->Vendor = 802C0000802C
0:102  0:000  SmbiosTable.Type17->SerialNumber = 1C52E55A
0:102  0:000  SmbiosTable.Type17->PartNumber = 4ATF51264HZ-2G6E1  
0:102  0:000  Boot status=0
0:102  0:000  Running on: 'XPS 15 9570' with board '0YMMT6'
0:102  0:000  === [ GetCPUProperties ] ==================================
0:102  0:000  CPU Vendor = 756E6547 Model=906EA
0:102  0:000   The CPU supported SSE4.1
0:102  0:000  BrandString = Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz
0:102  0:000   The CPU supported turbo
0:102  0:000  MSR 0x35               40008
0:102  0:000   TSC/CCC Information Leaf:
0:102  0:000    numerator     : 192
0:102  0:000    denominator   : 2
0:102  0:000   Calibrated ARTFrequency: 24003291
0:102  0:000  MSR 0xE2 before patch 1E008008
0:102  0:000  MSR 0xE2 is locked, PM patches will be turned on
0:102  0:000  MSR 0xCE              0008083B_F1011700
0:102  0:000  corrected FLEX_RATIO = 0
0:102  0:000  MSR 0x1B0             00000000
0:102  0:000  FSBFrequency = 151 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:102  0:000  MaxDiv/MinDiv: 23.0/8
0:102  0:000  Turbo: 39/40/40/40
0:102  0:000  Features: 0xBFEBFBFF
0:102  0:000  Threads: 8
0:102  0:000  Cores: 4
0:102  0:000  FSB: 100 MHz
0:102  0:000  CPU: 3465 MHz
0:102  0:000  TSC: 3465 MHz
0:102  0:000  PIS: 100 MHz
0:102  0:000  ExternalClock: 25 MHz
0:102  0:000  === [ GetDevices ] ========================================
0:102  0:000  PCI (00|00:00.00) : 8086 3E10 class=060000
0:102  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:102  0:000  PCI (00|01:00.00) : 10DE 1C8D class=030200
0:102  0:000  PCI (00|00:02.00) : 8086 3E9B class=030000
0:102  0:000   - GFX: Model=Intel UHD Graphics 630 (Intel)
0:102  0:000  PCI (00|00:04.00) : 8086 1903 class=118000
0:102  0:000  PCI (00|00:08.00) : 8086 1911 class=088000
0:102  0:000  PCI (00|00:12.00) : 8086 A379 class=118000
0:102  0:000  PCI (00|00:14.00) : 8086 A36D class=0C0330
0:102  0:000  PCI (00|00:14.02) : 8086 A36F class=050000
0:102  0:000  PCI (00|00:15.00) : 8086 A368 class=0C8000
0:102  0:000  PCI (00|00:15.01) : 8086 A369 class=0C8000
0:102  0:000  PCI (00|00:16.00) : 8086 A360 class=078000
0:102  0:000  PCI (00|00:17.00) : 8086 A353 class=010601
0:102  0:000  PCI (00|00:1B.00) : 8086 A340 class=060400
0:102  0:000  PCI (00|02:00.00) : 8086 15DA class=060400
0:102  0:000  PCI (00|03:00.00) : 8086 15DA class=060400
0:102  0:000  PCI (00|03:01.00) : 8086 15DA class=060400
0:102  0:000  PCI (00|03:02.00) : 8086 15DA class=060400
0:102  0:000  PCI (00|3A:00.00) : 8086 15DB class=0C0330
0:102  0:000  PCI (00|00:1C.00) : 8086 A338 class=060400
0:102  0:000  PCI (00|3B:00.00) : 168C 003E class=028000
0:102  0:000   - WIFI: Vendor=Atheros
0:102  0:000  PCI (00|00:1C.04) : 8086 A33C class=060400
0:102  0:000  PCI (00|3C:00.00) : 10EC 525A class=FF0000
0:102  0:000  PCI (00|00:1F.00) : 8086 A30E class=060100
0:103  0:000  PCI (00|00:1F.03) : 8086 A348 class=040380
0:103  0:000  PCI (00|00:1F.04) : 8086 A323 class=0C0500
0:103  0:000  PCI (00|00:1F.05) : 8086 A324 class=0C8000
0:103  0:000  === [ GetDefaultSettings ] ================================
0:103  0:000  Clover load options size = 150 bytes
0:108  0:004  EFI\CLOVER\.plist not loaded with name from LoadOptions: Invalid Parameter
0:113  0:005  EFI\CLOVER\config.plist loaded: Success
0:113  0:000  === [ GetListOfThemes ] ===================================
0:116  0:003  - [00]: random
0:118  0:001  - [00]: embedded
0:121  0:002  === [ Found config plists ] ===============================
0:122  0:001  - config.plist
0:123  0:001  - config_alt.plist
0:124  0:000  === [ GetEarlyUserSettings ] ==============================
0:124  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:169  0:045  === [ LoadDrivers ] =======================================
0:841  0:672  Loading AppleImageCodec-64.efi  status=Success
0:923  0:081  Loading AppleUITheme-64.efi  status=Success
0:987  0:064  Loading DataHubDxe-64.efi  status=Success
1:056  0:068  Loading AppleKeyAggregator-64.efi  status=Success
1:119  0:062  Loading VBoxHfs-64.efi  status=Success
1:192  0:072   - driver needs connecting
1:208  0:016  Loading FSInject-64.efi  status=Success
1:275  0:066  Loading FirmwareVolume-64.efi  status=Success
1:340  0:065  Loading SMCHelper-64.efi  status=Success
1:399  0:058  Loading apfs.efi  status=Success
1:473  0:074   - driver needs connecting
1:489  0:016  Loading OsxAptioFix2Drv-64.efi  status=Success
1:554  0:064  2 drivers needs connecting ...
1:570  0:016  PlatformDriverOverrideProtocol not found. Installing ... Success
1:614  0:043  APFS driver loaded
1:630  0:016  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
2:240  0:610  === [ InitScreen ] ========================================
2:927  0:686  SetMaxResolution: found best mode 0: 1920x1080
2:960  0:033   - already set
2:977  0:016  Console modes reported: 4, available modes:
2:993  0:016   - [01]: 80x25
3:010  0:016   - [02]: 80x50
3:026  0:016   - [03]: 100x31
3:042  0:016   - [04]: 240x56 (current mode)
3:058  0:016  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,25E37508-8EE6-4673-9E37-F8014F4C833A,0x28,0x64000)
3:087  0:028  === [ GetMacAddress ] =====================================
3:740  0:653  === [ ScanSPD ] ===========================================
4:479  0:738  SMBus device : 8086 A323 class=0C0500 status=Success
4:496  0:016  SMBus CmdReg: 0x3
4:512  0:016  Scanning SMBus [8086:A323], mmio: 0xED520004, ioport: 0xEFA0, hostc: 0x11
4:528  0:016  Slots to scan [8]...
4:545  0:016  SPD[0]: Type 12 @0x50
4:591  0:046  Not using XMP because it is not present
4:648  0:057  DDR speed 2666MHz
4:704  0:055  Slot: 0 Type 26 4096MB 2666MHz Vendor=Micron Technology PartNo=4ATF51264HZ-2G6E1 SerialNo=010C050301010B04
4:758  0:054  SPD[2]: Type 12 @0x52
4:835  0:076  Not using XMP because it is not present
4:888  0:053  DDR speed 2666MHz
4:942  0:053  Slot: 2 Type 26 4096MB 2666MHz Vendor=Micron Technology PartNo=4ATF51264HZ-2G6E1 SerialNo=010C05020E05050A
4:998  0:055  === [ GetAcpiTablesList ] =================================
5:808  0:809  Get Acpi Tables List from RSDT:
5:841  0:033   - [00]: FACP  CBX3    len=132
5:857  0:016   - [01]: APIC  CBX3    len=188
5:873  0:016   - [02]: FPDT  CBX3    len=68
5:889  0:016   - [03]: FIDT  CBX3    len=156
5:917  0:027   - [04]: MCFG  CBX3    len=60
5:939  0:022   - [05]: SSDT  SataTabl len=1889
5:955  0:016   - [06]: SSDT  CpuSsdt len=6101
5:971  0:015   - [07]: BOOT  CBX3     len=40
5:988  0:016   - [08]: SSDT  SaSsdt  len=4918
6:004  0:016   - [09]: SSDT  PegSsdt len=9792
6:031  0:027   - [10]: HPET  CBX3    len=56
6:047  0:015   - [11]: SSDT  xh_cfhd4 len=10569
6:063  0:016   - [12]: UEFI  CBX3    len=72
6:080  0:016   - [13]: LPIT  CBX3    len=92
6:096  0:015   - [14]: SSDT  PtidDevc len=10206
6:112  0:015   - [15]: SSDT  TbtTypeC len=4094
6:129  0:016   - [16]: DBGP  CBX3    len=52
6:145  0:016   - [17]: DBG2  CBX3    len=84
6:161  0:015   - [18]: SSDT  UsbCTabl len=2012
6:177  0:016   - [19]: SSDT  DptfTabl len=25902
6:193  0:016   - [20]: MSDM  CBX3    len=85
6:220  0:026   - [21]: SLIC  CBX3    len=374
6:236  0:016   - [22]: SSDT  ADebTabl len=324
6:252  0:015   - [23]: SSDT  SgPeg len=174
6:269  0:016   - [24]: DMAR  EDK2     len=168
6:285  0:016   - [25]: NHLT  EDK2     len=45
6:302  0:017   - [26]: TPM2  CBX3    len=52
6:319  0:016   - [27]: ASF!  CBX3    len=116
6:335  0:016   - [28]: SSDT  OptTabl len=7920
6:352  0:016   - [29]: BGRT   len=56
6:367  0:015  Calibrated TSC Frequency = 2304316000 = 2304MHz
6:384  0:016  === [ GetUserSettings ] ===================================
7:001  0:616   - final DSDT Fix mask=00000000
7:017  0:016  Using ProductName from config: MacBookPro15,2
7:032  0:015  Found same BiosVersion in clover and config
7:048  0:015  BiosVersion: MBP152.88Z.0178.B00.1806260902
7:064  0:016  BiosReleaseDate: 06/26/2018
7:080  0:016  Using FirmwareFeatures from config: 0xFC0FE137
7:097  0:016  Using FirmwareFeaturesMask from config: 0xFF1FFF3F
7:113  0:015  Board-ID set from config as Mac-827FB448E656EC26
7:139  0:025  BoardType: 0xA
7:155  0:015  ChassisType: 0x9
7:173  0:017  === [ Found DSDT tables ] =================================
8:096  0:923  === [ ScanVolumes ] =======================================
8:765  0:669  Found 13 volumes with blockIO
8:782  0:016  - [00]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x11,0x0)
8:815  0:033          USB volume
8:831  0:015  - [01]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x11,0x0)\HD(1,GPT,AB755483-68CF-4B23-89CF-19681F5D7BAF,0x28,0x64000)
8:874  0:042          Result of bootcode detection: bootable unknown (legacy)
8:891  0:017          USB volume
8:907  0:016  - [02]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x11,0x0)\HD(2,GPT,D9BB20D3-3451-4C21-817A-B96A04CB9CB3,0x64028,0x38A3FB0)
8:941  0:033          USB volume
8:958  0:016  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
8:991  0:032  - [04]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,25E37508-8EE6-4673-9E37-F8014F4C833A,0x28,0x64000)
9:023  0:032          Result of bootcode detection: bootable unknown (legacy)
9:051  0:027          This is SelfVolume !!
9:067  0:016  - [05]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)
9:100  0:032          Result of bootcode detection: bootable unknown (legacy)
9:116  0:016  - [06]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,6A43D0E0-EF93-4BBC-934F-9492F3D11D3B,0xDFE8800,0x1AD800)
9:148  0:032  - [07]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(4,GPT,AE324754-7127-4683-B8A8-09E90AB975AB,0xE196000,0x1B9EA800)
9:192  0:043          Result of bootcode detection: bootable unknown (legacy)
9:208  0:016  - [08]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(5,GPT,6406DF45-9CA1-4A51-B5A4-019DCD54A79D,0x29B80800,0xE2C4000)
9:242  0:033          Result of bootcode detection: bootable unknown (legacy)
9:259  0:016  - [09]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,0CB02FFA67C5C3428CB3D473474961DA)
9:303  0:043  - [10]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,CA1AF495A1594C4D805136F399FAB0AC)
9:335  0:032  - [11]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,20BADCADECD3934DBE21ABE1BD195BA6)
9:379  0:043  - [12]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F135D9762F268D49BBD8A06598075781)
9:411  0:032  === [ InitTheme ] =========================================
10:113  0:701   using embedded theme
10:129  0:016  Using embedded font: Success
10:145  0:016  Chosen embedded theme
10:162  0:016  after NVRAM boot-args=nv_disable=1 dart=0 -no_compat_check -disablegfxfirmware -v
10:189  0:027  === [ Dump SMC keys from NVRAM ] ==========================
10:648  0:459  found AppleSMC protocol
10:721  0:072  Registered 17 SMC keys
10:741  0:019  === [ ScanLoader ] ========================================
11:426  0:685  - [01]: 'EFI'
11:460  0:033          AddLoaderEntry for Volume Name=EFI
11:477  0:016          skipped because entry is hidden
11:493  0:016  - [02]: 'Install macOS Mojave'
11:530  0:037          AddLoaderEntry for Volume Name=Install macOS Mojave
11:566  0:035  - [04]: 'EFI'
11:613  0:047          AddLoaderEntry for Volume Name=EFI
11:639  0:025          AddLoaderEntry for Volume Name=EFI
11:655  0:015          skipped because entry is hidden
11:671  0:016  - [08]: 'WINDOWS'
11:703  0:032  - [09]: 'Preboot'
11:762  0:059          AddLoaderEntry for Volume Name=Preboot
11:799  0:036      Check if volume Is Hibernated:
11:815  0:016      Check sleep image 'by signature':
11:834  0:019      using default sleep image name = \private\var\vm\sleepimage
11:862  0:028      sleepimage not found -> Not Found
11:879  0:016      hibernated: no - sign
11:907  0:027          AddLoaderEntry for Volume Name=Preboot
11:974  0:067  - [10]: 'Mac OS'
12:185  0:211          AddLoaderEntry for Volume Name=Mac OS
12:240  0:054      Check if volume Is Hibernated:
12:256  0:015      Check sleep image 'by signature':
12:324  0:068      using default sleep image name = \private\var\vm\sleepimage
12:379  0:054      sleepimage not found -> Not Found
12:395  0:016      hibernated: no - sign
12:438  0:043  - [11]: 'Recovery'
12:492  0:053          AddLoaderEntry for Volume Name=Recovery
12:544  0:052  - [12]: 'VM'
12:576  0:032  Scanning legacy ...
12:593  0:016  === [ AddCustomTool ] =====================================
13:234  0:640  found tool \EFI\CLOVER\tools\Shell64U.efi
13:250  0:015  Checking EFI partition Volume 1 for Clover
13:269  0:019   Found Clover
13:285  0:015  === [ GetEfiBootDeviceFromNvram ] =========================
13:738  0:452  Default boot entry not found
13:753  0:015  DefaultIndex=-1 and MainMenu.EntryCount=12
13:817  0:064  GUI ready
20:530  6:712  EDITED: nv_disable=1 dart=0 -no_compat_check -disablegfxfirmware -v
22:285  1:755  === [ GetUserSettings ] ===================================
22:977  0:692   - final DSDT Fix mask=00000000
22:993  0:015  Using ProductName from config: MacBookPro15,2
23:018  0:024  Found same BiosVersion in clover and config
23:033  0:015  BiosVersion: MBP152.88Z.0178.B00.1806260902
23:061  0:027  BiosReleaseDate: 06/26/2018
23:077  0:015  Using FirmwareFeatures from config: 0xFC0FE137
23:093  0:015  Using FirmwareFeaturesMask from config: 0xFF1FFF3F
23:109  0:016  Board-ID set from config as Mac-827FB448E656EC26
23:125  0:016  BoardType: 0xA
23:142  0:017  ChassisType: 0x9
33:994  10:851  ReinitSelfLib after theme change
34:010  0:016  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,25E37508-8EE6-4673-9E37-F8014F4C833A,0x28,0x64000)
34:039  0:028  === [ ScanVolumes ] =======================================
34:718  0:678  Found 13 volumes with blockIO
34:734  0:016  - [00]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x11,0x0)
34:767  0:033          USB volume
34:784  0:016  - [01]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x11,0x0)\HD(1,GPT,AB755483-68CF-4B23-89CF-19681F5D7BAF,0x28,0x64000)
34:817  0:033          Result of bootcode detection: bootable unknown (legacy)
34:833  0:016          USB volume
34:860  0:026  - [02]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x11,0x0)\HD(2,GPT,D9BB20D3-3451-4C21-817A-B96A04CB9CB3,0x64028,0x38A3FB0)
34:894  0:033          USB volume
34:910  0:016  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
34:943  0:032  - [04]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,25E37508-8EE6-4673-9E37-F8014F4C833A,0x28,0x64000)
34:975  0:032          Result of bootcode detection: bootable unknown (legacy)
34:992  0:017          This is SelfVolume !!
35:020  0:027  - [05]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)
35:054  0:033          Result of bootcode detection: bootable unknown (legacy)
35:070  0:015  - [06]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,6A43D0E0-EF93-4BBC-934F-9492F3D11D3B,0xDFE8800,0x1AD800)
35:103  0:032  - [07]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(4,GPT,AE324754-7127-4683-B8A8-09E90AB975AB,0xE196000,0x1B9EA800)
35:147  0:043          Result of bootcode detection: bootable unknown (legacy)
35:162  0:015  - [08]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(5,GPT,6406DF45-9CA1-4A51-B5A4-019DCD54A79D,0x29B80800,0xE2C4000)
35:196  0:033          Result of bootcode detection: bootable unknown (legacy)
35:212  0:015  - [09]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,0CB02FFA67C5C3428CB3D473474961DA)
35:256  0:044  - [10]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,CA1AF495A1594C4D805136F399FAB0AC)
35:292  0:035  - [11]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,20BADCADECD3934DBE21ABE1BD195BA6)
35:324  0:032  - [12]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,21DE4C28-9925-4F7C-AA58-421D5FA1635E,0x64028,0xDF84758)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F135D9762F268D49BBD8A06598075781)
35:368  0:043  === [ InitTheme ] =========================================
36:071  0:702   using embedded theme
36:088  0:017  Using embedded font: Success
36:104  0:015  Chosen embedded theme
36:121  0:017  after NVRAM boot-args= nv_disable=1 dart=0 -no_compat_check -v -igfxdump
36:138  0:016  === [ ScanLoader ] ========================================
36:834  0:696  - [01]: 'EFI'
36:867  0:032          AddLoaderEntry for Volume Name=EFI
36:883  0:016          skipped because entry is hidden
36:899  0:015  - [02]: 'Install macOS Mojave'
36:930  0:031          AddLoaderEntry for Volume Name=Install macOS Mojave
36:951  0:020  - [04]: 'EFI'
36:995  0:044          AddLoaderEntry for Volume Name=EFI
37:020  0:024          AddLoaderEntry for Volume Name=EFI
37:036  0:016          skipped because entry is hidden
37:064  0:027  - [08]: 'WINDOWS'
37:095  0:031  - [09]: 'Preboot'
37:149  0:053          AddLoaderEntry for Volume Name=Preboot
37:184  0:035      Check if volume Is Hibernated:
37:200  0:015      Check sleep image 'by signature':
37:220  0:019      using default sleep image name = \private\var\vm\sleepimage
37:238  0:018      sleepimage not found -> Not Found
37:253  0:015      hibernated: no - sign
37:280  0:026          AddLoaderEntry for Volume Name=Preboot
37:348  0:067  - [10]: 'Mac OS'
37:529  0:181          AddLoaderEntry for Volume Name=Mac OS
37:574  0:045      Check if volume Is Hibernated:
37:591  0:016      Check sleep image 'by signature':
37:639  0:047      using default sleep image name = \private\var\vm\sleepimage
37:668  0:029      sleepimage not found -> Not Found
37:685  0:016      hibernated: no - sign
37:729  0:044  - [11]: 'Recovery'
37:779  0:050          AddLoaderEntry for Volume Name=Recovery
37:830  0:050  - [12]: 'VM'
37:861  0:031  Scanning legacy ...
37:887  0:026  === [ AddCustomTool ] =====================================
38:536  0:648  found tool \EFI\CLOVER\tools\Shell64U.efi
38:552  0:016  Checking EFI partition Volume 1 for Clover
38:569  0:017   Found Clover
38:594  0:025  === [ GetEfiBootDeviceFromNvram ] =========================
39:037  0:442  Default boot entry not found
39:053  0:016  DefaultIndex=-1 and MainMenu.EntryCount=12
43:525  4:472  BootVariable of the entry is empty
43:546  0:020  === [ StartLoader ] =======================================
44:240  0:693  Finally: ExternalClock=26MHz BusSpeed=100188kHz CPUFreq=2304MHz PIS: hw.busfrequency=104000000Hz
44:273  0:032  Loading boot.efi  status=Success
44:379  0:106  GetOSVersion: 10.13.6 (17G65)
44:412  0:032  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_
44:440  0:028  Will not patch boot.efi
44:464  0:023  === [ PatchSmbios ] =======================================
45:135  0:671  insert table 9 for dev 0:0
45:153  0:017  Trusting SMBIOS...
45:168  0:015  Detected alternating SMBIOS channel banks
45:184  0:016  Channels: 2
45:201  0:016  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
45:625  0:424   partNum=4ATF51264HZ-2G6E1  
45:642  0:016  SMBIOS Type 17 Index = 0 => 0 0:
45:658  0:016  BANK 0 DIMM0 2667MHz 4096MB
45:685  0:026   partNum=4ATF51264HZ-2G6E1  
45:701  0:016  SMBIOS Type 17 Index = 1 => 1 2:
45:718  0:016  BANK 1 DIMM0 2667MHz 4096MB
45:734  0:016  mTotalSystemMemory = 8192
45:750  0:016  NumberOfMemoryDevices = 2
45:766  0:015  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
45:782  0:016  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000
45:798  0:016  Table 131 is present, CPUType=31
45:813  0:015  Change to: 605
45:829  0:015  === [ PatchACPI ] =========================================
46:534  0:704  Xsdt reallocation done
46:562  0:028  old FADT length=114
46:578  0:015   SignatureFixup: 0x358A5173 -> 0x0
46:598  0:019  Apply DsdtFixMask=0x00000000
46:614  0:015     drop _DSM mask=0x0000
46:630  0:016  === [ FixBiosDsdt ] =======================================
47:301  0:670  VideoCard devID=0x3E9B8086
47:317  0:016  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
47:333  0:016  USBADR[0] = 0x140000 and PCIe = 0xFFFE
47:351  0:017  USBADR[1] = 0x1B0000 and PCIe = 0x0
47:368  0:016  Found Airport Atheros at 0x1C0000, 0x0, DeviceID=0x003E
47:405  0:037    0 replacements
47:421  0:015  first CPU found at A31E offset A321
47:437  0:016  score candidate at A31A
47:453  0:016  score inserted in acpi_cpu_score _SB_
47:470  0:016  Found ACPI CPU: PR00 | PR01 | PR02 | PR03 | PR04 | PR05 | PR06 | PR07 | PR08 | PR09 | PR10 | PR11 | PR12 | PR13 | PR14 | PR15 Invalid character found in ProcessorOP 0xFFFFFFC8!
47:748  0:277  , within the score: _SB_
47:764  0:016  PreCleanup XSDT: count=30, length=276
47:792  0:028  PreCleanup XSDT, corrected XSDT: count=30, length=276
47:808  0:015  === [ ACPIPatchedAML ] ====================================
48:430  0:621  AutoMerge pass 1
48:446  0:016  Unsorted
48:463  0:016  Inserting SSDT-Disable_DGPU.aml from EFI\CLOVER\ACPI\patched: ignore on pass 1
48:495  0:032  === [ ACPIDropTables ] ====================================
49:117  0:621    0 replacements
49:134  0:016    0 replacements
49:150  0:015  Found OperationRegion(PNVS, SystemMemory, 6433A000, ...)
49:177  0:027    0 replacements
49:193  0:015  Found OperationRegion(SANV, SystemMemory, 6F56EC98, ...)
49:209  0:015    0 replacements
49:225  0:016    0 replacements
49:242  0:016    0 replacements
49:258  0:016    0 replacements
49:275  0:016    0 replacements
49:293  0:017    0 replacements
49:309  0:016  Found OperationRegion(CIDE, SystemMemory, FD6D06E0, ...)
49:326  0:016    0 replacements
49:342  0:016  Found OperationRegion(ADHD, SystemMemory, 6EB79000, ...)
49:358  0:015  Found OperationRegion(ABLK, SystemMemory, 6EB79020, ...)
49:385  0:026    0 replacements
49:401  0:016    0 replacements
49:417  0:016  Found OperationRegion(BIDB, SystemMemory, FD6D0870, ...)
49:433  0:016  Found OperationRegion(BIDG, SystemMemory, FD6D0880, ...)
49:450  0:016  === [ ACPIPatchedAML ] ====================================
50:066  0:616  AutoMerge pass 2
50:082  0:015  Unsorted
50:099  0:016  Inserting SSDT-Disable_DGPU.aml from EFI\CLOVER\ACPI\patched: size=224 ... Success
50:149  0:049  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
50:176  0:027  Maximum control=0x17
50:192  0:016  Turbo control=0x28
50:208  0:016  P-States: min 0x8, max 0x28
50:224  0:016  SSDT with CPU P-States and plugin-type generated successfully
50:241  0:016  SSDT with CPU C-States generated successfully
50:258  0:016  Cleanup XSDT: count=33, length=300
50:274  0:016  corrected XSDT count=33, length=300
50:290  0:016  === [ RestSetup macOS ] ===================================
50:895  0:604  Intel GFX injection not set
50:923  0:027   RCBA disabled; cannot use it
50:940  0:016  stringlength = 1064
50:956  0:016  CurrentMode: Width=1920 Height=1080
50:972  0:016  Beginning FSInjection
50:998  0:026  Use origin smbios table type 1 guid.
51:036  0:037  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
51:051  0:015  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.1)
51:358  0:306  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_LPCSensors.kext (v.1787)
51:738  0:380  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1787)
51:784  0:045  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1787)
51:813  0:029  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_ACPISensors.kext (v.1787)
51:855  0:042  Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.2.1)
51:885  0:029  Extra kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext (v.1.8.25)
51:923  0:037    |-- PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext (v.1.8.25)
51:992  0:069    |-- PlugIn kext: EFI\CLOVER\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext (v.1.8.25)
52:074  0:081  Extra kext: EFI\CLOVER\kexts\Other\VoodooI2CHID.kext (v.1)
52:117  0:042  Extra kext: EFI\CLOVER\kexts\Other\VoodooI2C.kext (v.2.0.1)
52:151  0:034    |-- PlugIn kext: EFI\CLOVER\kexts\Other\VoodooI2C.kext\Contents\PlugIns\VoodooI2CServices.kext (v.1)
52:178  0:027    |-- PlugIn kext: EFI\CLOVER\kexts\Other\VoodooI2C.kext\Contents\PlugIns\VoodooGPIO.kext (v.1.1)
52:217  0:038  Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext (v.2.2.2)
52:249  0:032  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.2.6)
52:278  0:028  Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext (v.2.3.0)
52:310  0:032  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1787)
52:362  0:051  Extra kext: EFI\CLOVER\kexts\Other\AtherosE2200Ethernet.kext (v.2.2.2)
52:397  0:035  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
52:415  0:017  Custom boot screen not used because entry has unset use graphics
52:445  0:030  Closing log
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top