UtterDisbelief
Moderator
- Joined
- Feb 13, 2012
- Messages
- 9,620
- Motherboard
- Gigabyte B760 Gaming X AX
- CPU
- i5-14600K
- Graphics
- RX 560
- Mac
- Classic Mac
- Mobile Phone
I've tried those ports, no joy.
Requested info below, however, I have no Other or L/E folders
View attachment 434464View attachment 434465
Okay. The failure of your UniBeast installer to boot in one of the two black ports indicates that, if the BIOS is set correctly, then the USB stick itself isn't formatted or partitioned correctly, so will need checking.
As for the screengrabs They show that you have no port-limit removal patch in place. Probably no USBInjectAll - unless it is in Library/Extensions (which will be there on the main Sierra drive). Also no SSDT-UIAC is operational either. This means that all ports except one, are running as USB2.0 only.
You do not need the FakePCIID_XHCIMux.kext or the GenericUSBXHCI.kext.
So if that USB drive will not boot the motherboard, then it does not have an EFI partition/folder set up with Clover. There is nothing unusual about your hardware if it is the same as your profile.