Contribute
Register

Cannot boot to my Hacintosh after adding a new SSD

Status
Not open for further replies.
Joined
Nov 23, 2017
Messages
51
Motherboard
Gigabyte Z270X Ultra Gaming
CPU
i5-7600K
Graphics
RX580
Mac
  1. MacBook Pro
  2. Mac mini
Mobile Phone
  1. iOS
All things were working fine. Been up/running on 10.13 high sierra for a while now. I unplugged all my sata drives (EVO 850 and DVD drives) and installed a new SSD to install Windows 10 on. The windows installer seems to not like having other sata drives plugged in during the installer. seems simple enough.

I loaded Windows 10 on the new drive, then plugged all the other SSD/sata disks in... went into bios and switch boot #1 back to the hacintosh disk... clover comes up, attempts to boot up, then i get to 90% status bar (w/apple logo) and then it hangs. No idea where to go from here.

Anyone got ideas? I've attempted many boots, bios settings exactly the same as they were BEFORE adding the new SSD drive (i took pictures). confused.

Thanks in advance for any help.
 
clover comes up, attempts to boot up, then i get to 90% status bar (w/apple logo) and then it hangs. No idea where to go from here.
Boot in verbose mode and post a picture of the screen when it stops.
 
Here ya go. Thanks for the quick response!

Screens were flying by pretty fast so I took a few.
 

Attachments

  • C1589F37-0502-4552-BC77-964C062333D6.jpeg
    C1589F37-0502-4552-BC77-964C062333D6.jpeg
    4.5 MB · Views: 59
  • F9A2A409-C76E-4625-8634-B36C2DB1C6F1.jpeg
    F9A2A409-C76E-4625-8634-B36C2DB1C6F1.jpeg
    4.3 MB · Views: 67
  • 6C9068F8-67E5-49F3-B7F2-2966048FE3A3.jpeg
    6C9068F8-67E5-49F3-B7F2-2966048FE3A3.jpeg
    4.1 MB · Views: 65
  • 959E0C7B-2971-4177-B799-DED80417688D.jpeg
    959E0C7B-2971-4177-B799-DED80417688D.jpeg
    3.7 MB · Views: 64
  • 599754B0-7734-4A12-998A-500EBDD3F15C.jpeg
    599754B0-7734-4A12-998A-500EBDD3F15C.jpeg
    2.5 MB · Views: 54
Status
Not open for further replies.
Back
Top