CalDigit Vendor and device IDs?

[kDawg]

Does anyone know the device and vendor IDs for CalDigit's USB3 card? I want to try and bin patch their new driver v1.3.1

 

[relume]

Hello

I had working the CalDigit USB3 PCIe-Card under MacOSX Server 10.6.7 an Multibeast 3.7.x. Actually after upgrading to MacOSX Server 10.6.8 (Combo) and Multibeast 3.8.0 the card does not work any more - it shows up in the USB-Bus probe but the attachet devices (USB3 and USB2) do not work. Find enclosed the USB-Bus probe report in the way that the CalDigit USB3 PCIe-Card shows up:

High Speed device @ 1 (0x00000000): .............................................   Hub device: "USB Super-Speed Bus"
    Port Information:   0x061d
           Built-in Root Hub
           Captive
           Internal Device
           Connected
           Enabled
    Device Descriptor   
        Descriptor Version Number:   0x0200
        Device Class:   9   (Hub)
        Device Subclass:   0
        Device Protocol:   1   (High Speed Single Transaction Translator)
        Device MaxPacketSize:   64
        Device VendorID/ProductID:   0x2188/0x0001   (unknown vendor)
        Device Version Number:   0x0200
        Number of Configurations:   1
        Manufacturer String:   2 "CalDigit Inc."
        Product String:   1 "USB Super-Speed Bus"
        Serial Number String:   0 (none)
    Configuration Descriptor   
        Length (and contents):   27
            Raw Descriptor (hex)    0000: 0A 02 1B 00 01 01 00 60  00 F4 09 04 00 00 01 09  
            Raw Descriptor (hex)    0010: 00 01 00 08 05 81 03 08  00 09 FF 
        Number of Interfaces:   1
        Configuration Value:   1
        Attributes:   0x60 (self-powered, remote wakeup)
        MaxPower:   0 ma
        Interface #0 - Hub   
            Alternate Setting   0
            Number of Endpoints   1
            Interface Class:   9   (Hub)
            Interface Subclass;   0
            Interface Protocol:   1   (Multi TT Hub configured as a Single TT Hub)
            Endpoint 0x81 - Interrupt Input   
                Address:   0x81  (IN)
                Attributes:   0x03  (Interrupt no synchronization data endpoint)
                Max Packet Size:   8  (8 x 1  transactions opportunities per microframe)
                Polling Interval:   9 (256 microframes (32 msecs) )
    Hub Descriptor   
        Length (and contents):   9
            Raw Descriptor (hex)   0000: 09 29 04 09 00 0A 00 00  FF 
        Number of Ports:   0x04
        Hub Characteristics:   0x9 (Individually switched standalone hub with individual port overcurrent protection requiring 8 FS bit times and  no port indicators)
        PowerOnToGood time:   20 ms
        Controller current:   0 mA
        Device Removable (byte):   0x0
        Port Power Control Mask (byte):   0xff

best regards

 

[thelostswede]

Doesn't seem like you need to patch their drivers, I just installed them and they work perfectly with an ASMedia USB 3.0 card...
Tested the performance with an SSD connected to a SATA 6Gbps to USB 3.0 bridge and was getting over 200MB/s read and close to 200MB/s write. Not as fast as in Windows, but still respectable performance.
This was using 10.6.8 and the latest driver from Caldigit.

 

[kDawg]

I'm trying to get USB3 working with Gigabyte's built in ports. Doesn't work on my GA-X58A-UD5.