- Joined
- Mar 1, 2011
- Messages
- 40
- Motherboard
- GA-X79-UP4
- CPU
- i7-4930K
- Graphics
- RX 570
- Mac
- Mobile Phone
The third time I fell to the ground...
I have running two Hackintosh (1 MacPro as Server, and other as iMac) both running more than expected. But at the third time......I got into crisis.
I am using as always the same utilities and tools coming from Tonymac86, just accurate and updated (iBoot, Multibeast 3.4 updated)
My project is to build an "Apple MediaCenter" for home entertainment (HD, Video and Audio). For that purpose I am using:
- GA-P41-ES3G
- INTEL Quad Core
- 4 GB RAM
- ATI Radeon HD 5850 (it works more than fine after upgrading the new Multibeast 3.4. Great !)
- Samsung 35" panel LED via HDMI or VDI.
- Creative Sound Blaster X-Fi
- SL 10.6.7
- NO DSDT (EasyBeast)
All works fine, but audio does not sound !!!
I have done several test and combinations of VoodooHDA and System Definitions......but nothing sound at my home.
I tested with and without internal ALC888 (BIOS utility used), but nothing sound.
I tried to find the original AppleHDA and didn´t find it.... curiously ?
I don´t have sound when booting using iBoot as well (neither the ALC888, nor the X-Fi).
Any kind of suggestions to give light to the blind ? ......or better, giving sound to the silent.
Thanks in advance.
Post Data: All hardware was tested under w7 and works fine, so must be a multibeast configuration issue, i believe.
I have running two Hackintosh (1 MacPro as Server, and other as iMac) both running more than expected. But at the third time......I got into crisis.
I am using as always the same utilities and tools coming from Tonymac86, just accurate and updated (iBoot, Multibeast 3.4 updated)
My project is to build an "Apple MediaCenter" for home entertainment (HD, Video and Audio). For that purpose I am using:
- GA-P41-ES3G
- INTEL Quad Core
- 4 GB RAM
- ATI Radeon HD 5850 (it works more than fine after upgrading the new Multibeast 3.4. Great !)
- Samsung 35" panel LED via HDMI or VDI.
- Creative Sound Blaster X-Fi
- SL 10.6.7
- NO DSDT (EasyBeast)
All works fine, but audio does not sound !!!
I have done several test and combinations of VoodooHDA and System Definitions......but nothing sound at my home.
I tested with and without internal ALC888 (BIOS utility used), but nothing sound.
I tried to find the original AppleHDA and didn´t find it.... curiously ?
I don´t have sound when booting using iBoot as well (neither the ALC888, nor the X-Fi).
Any kind of suggestions to give light to the blind ? ......or better, giving sound to the silent.
Thanks in advance.
Post Data: All hardware was tested under w7 and works fine, so must be a multibeast configuration issue, i believe.