Build dilemma, (sleep, 64/32 bit related)

[spartacus]

OK so I have a more or less completely functional Sandy Bridge build running on a Gigabyte P67A-UD4-B3.

The installation went without any hiccups save one. I am using a Zonet (ralink chipset) wireless PCI adapter for which there do not appear to be any 64 bit drivers. It works perfectly when I use the 32-bit bootloader from multibeast. The trade-off is that in 32 bit mode, sleep doesn't work at all. The flip side, of course, is that with a 64-bit boot, the card isn't detected at all and sleep works perfectly.

Any ideas on how I can get both?

And mad props to the site for helping me get this up and running with relative ease.

 

[spartacus]

bump

no ideas huh?

 

[spartacus]

Thanks for that mod.

Any suggestions? Is it possible to get a 32-bit driver for a pci card working under 64 bit? Or is it possible to get sleep enabled using Gordo's guide without the 64-bit bootloader?

 

[spartacus]

bump. Is my question poorly phrased or is what I'm asking impossible? Is there a wireless card people would recommend so I can circumvent this issue?

 

[Gordo74]

Here's my suggestion: Spend $25 and build a network PCI card that will work with 64 bit OSX.

http://x86wifi.blogspot.com/2010/04/how ... -card.html

 

[eelhead]

Here's my suggestion: Spend $25 and build a network PCI card that will work with 64 bit OSX.

http://x86wifi.blogspot.com/2010/04/how ... -card.html

And if you are unable to find a Winking card this one http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... OU:US:1123 works OOB as well. I have that one.