Contribute
Register

Budget G3 Powerhack

Status
Not open for further replies.
Thank you :D

I already said to make mine but it will have 87mm. Hope it will feet.. I dont have a big gpu cooler like yours.

spackley said:
Gotcha...
The height of the cage is 80mm
Just in case you want to know the depth is 160mm and the width is 135mm
and it's the drive cage from a G5 Powermac.
 
spackley said:
Glad that the pics have been some help Minihack.
Regarding the reverse spring lock bar, all I did was epoxy two right angle brackets with holes in for the spring, one to the bar and one to the case at approx the same distance apart as the originals so as to have roughly the same spring tension, and it works a treat.
I have done a couple of G4's before and have just removed the spring completely but having it spring to lock is definitely better.

do you have any pictures you can share for the reverse spring lock bar? I accidentally broke the top latches of the plastic sheet that is under the motherboard so I want to use this same method on my G4 case.
 
Wish the pictures were still here.
 
Status
Not open for further replies.
Back
Top