Broadcom WiFi/Bluetooth [Guide]

[Humanate]

See Post #1/IV. Problem Reporting; attach all requested files

1. Description - Having trouble with Wifi with my BCM943602CS, all was working well until I did a reinstall, I have missed something but not sure what. Bluetooth is working, wifi is not, error I get is:

2. 10.11.6, GA-Z87-HD3, F8 BIOS, i5 4570 Haswell 3.2, Asus Geforce GT 640 2048MB DDR3
3. Installed FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext to S/L/E and HandOff patch kext installed
4. Attached
5. Attached
6. Attached

 

[toleda]

T is not listed in USB list in IOReg

See Post #1/Bluetooth Injection Method/1.kext enable/2. Correctly configured USB ...
Post to linked thread, off topic.

 

[toleda]

need something that doesn't have problems with the BT when waking up

The correct USB configuration is the user's responsibility, no guarantee for no problems.

 

[toleda]

wifi is not

BCM943602CS is supported natively. IOReg is correct.
Do not see anything wrong, no ideas.

 

[Humanate]

BCM943602CS is supported natively. IOReg is correct.
Do not see anything wrong, no ideas.

OK Thanks. Excuse the noob question, but if supported natively, does that mean I dont need FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext installed to S/L/E?

 

[toleda]

if supported natively, does that mean I dont need FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext installed to S/L/E?

Verify Info.plist for 43ba with the installed AirportBRCM4360.kext

 

[llamafilm]

I have Wifi working, but no Bluetooth. Device is a BCM94352Z. It appears in System Profiler under USB, but not under Bluetooth. I have BrcmFirmwareRepo.kext in /S/L/E and BrcmPatchRAM2.kext in Clover. Running macOS 10.12.6.
I see the following in the log; what does this mean?

kernel: Kext com.no-one.BrcmPatchRAM2 - library kext com.no-one.BrcmFirmwareStore not found.
kernel: Can't load kext com.no-one.BrcmPatchRAM2 - failed to resolve library dependencies.
kernel: Kext com.no-one.BrcmPatchRAM2 failed to load (0xdc00800e).
kernel: Failed to load kext com.no-one.BrcmPatchRAM2 (error 0xdc00800e).
kernel: Couldn't alloc class "BrcmPatchRAM2"

 

[RehabMan]

I have Wifi working, but no Bluetooth. Device is a BCM94352Z. It appears in System Profiler under USB, but not under Bluetooth. I have BrcmFirmwareRepo.kext in /S/L/E and BrcmPatchRAM2.kext in Clover. Running macOS 10.12.6.
I see the following in the log; what does this mean?

kernel: Kext com.no-one.BrcmPatchRAM2 - library kext com.no-one.BrcmFirmwareStore not found.
kernel: Can't load kext com.no-one.BrcmPatchRAM2 - failed to resolve library dependencies.
kernel: Kext com.no-one.BrcmPatchRAM2 failed to load (0xdc00800e).
kernel: Failed to load kext com.no-one.BrcmPatchRAM2 (error 0xdc00800e).
kernel: Couldn't alloc class "BrcmPatchRAM2"

BrcmPatchRAM2.kext requires BrcmFirmwareRepo.kext.

 

[llamafilm]

BrcmPatchRAM2.kext requires BrcmFirmwareRepo.kext.

I know, and I have BrcmFirmwareRepo.kext installed in /S/L/E using Kext Wizard.

 

[MapleOwl]

Does BCM94352Z work on Hp ProBook 440 G4 (I don't know is it have whitelist or not)? If it isn't what is your suggestion?