Contribute
Register

Broadcom WiFi/Bluetooth [Guide]

RehabMan

Moderator
Joined
May 2, 2012
Messages
183,969
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
I did miss that :think: and i fixed it but still Kexts loaded are ( FakePCIID.kext, AirPortBrcm4360.kext, USBInjectAll.kext) kexts not loaded (FakePCIID_Broadcom_WiFi.kext, BrcmFirmwareRepo.kext, BrcmNonPatchRAM2.kext).

FakePCIID_Broadcom_WiFi.kext can easily be seen that it is working from ioreg. It is an injector (codeless) kext, so it is never really expected to "load" (it just provides data to the IOCatalog).

As we already discussed your BT controller is not supported by current BrcmPatchRAM (or NonPatchRAM) kexts.
 
Joined
Jul 25, 2018
Messages
24
Motherboard
ASRock Z370 Extreme4
CPU
i9-9900k
Graphics
RX480
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Just bought a BCM94360CS2 second hand from ebay for $12 along with a BCM94360CS2 card To NGFF(M.2) Key A/E Adapter, plus some bits and bobs.

Hopefully fit straight into my ASRock Extreme 4 Z370 M2 wifi slot... might need a bit of fettling to get it in however.

Will post back how it goes..!

Installed it today - annoyingly there is a badly placed Cap on my motherboard meaning the adapter card need to be fettled to fit the final M2 slot on the top left of the motherboard.

That same cap also gets in the way of the card being flat, so its inserted securely at an angle. Good news is that it does work.

Just waiting for the antennas to arrive to test if it actually works - but it has detected that it has WiFi and Bluetooth, just can't connect to anything for obvious reasons!

Half way there at least.
 
Joined
Jan 12, 2017
Messages
13
Motherboard
MSI H170 Gaming M3
CPU
i5-6600
Graphics
GTX 1060
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
Hi,

in my Hackintosh i've installed a Broadcom BCM94331CD (it's a combo Wifi+BT from a 2012 iMac).

But i'm experiencing problems with BT periperhals because I'm getting a laggy experience, especially from the Magic Mouse 2 (that works perfectly on my MBP, so I exclude it's a mouse problem).

Here is my Clover config.plist
 

Attachments

  • config.plist.zip
    899 bytes · Views: 134
Joined
Aug 14, 2011
Messages
359
Motherboard
MSI MPG Z490 GAMING PLUS
CPU
i9-10900K
Graphics
RX 5500XT
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac mini
  4. Mac Pro
Classic Mac
  1. Power Mac
Mobile Phone
  1. iOS
nHas anyone successfully installed a BCM94360CD OR BCM94360CS on a carrier card in a 8th generation motherboard, particularly a Gigabyte board, and has it been detected and is it working either under the Mac OS or under Windows 10? I have two carriers one with each type of Apple Broadcom card, they are detected on an Asus 7 generation machine Z270 but I cannot get this machine(Z370) to recognize THE WIFI PORTION either card, in known working slots on my Z370. I.E. nothing shows in evice Manager but Bluetooth is completely functional as it derives its working functionality from the USB bus.
Update:
I have an OSXwifi version of a 4 antenna card on a PCIe carrier from another 6 generation machine I own, that is known to work, on High Sierra, and Win 10 Pro. I put it in an X1 slot on the Gigabyte Z370 it was detected, and Bluetooth works as well as I loaded that Bootcamp Bluetooth driver in the currently uactivated separate Win 10 pro M.2 drive. Testing the other carriers, only the Bluetooth works as expected. I built a Ubuntu bootable to run lspci and it shows the OSXWIFI card in the list from Terminal. I then built a High Sierra Unibeast flash and booted and Wifi shows as working in the menu bar of the installer window using the OTB kext. I am waiting for another repalement carrier card to test the Apple/Broadcom cards above that do not work. I am also waiting for a complete Fenvi FV T919 card and carrier as a last-ditch effort.
From the reading I have found these unique bits of info:
1. These cards must be installed in a X1 slot only. Even though an X16, X8, X4, and X2 slot are backward compatible there are problems with getting both Wifi and Bluetooth simultaneously to work, it has been written. (However I have both working in a 6 generation board GA Z170MX Gaming 5 in a x16 slot running X4 speed, the OSX wifi carrier is somewhat differnt, in that the slot for the card, accept two items: the Broadcom card and the connection for the bluetooth inserts in its own portion of the slot to right of the Wifi card portion of the slot on the carrier (one long slot with two items inserted.
2. The 3 antenna cards (BCM94360CD) are new school and the latest, 4 antenna cards are old school (BCM94360CS). The 3 antenna cards use a new style of wifi antenna technology, than the older card.
3. Supposedly the new card will not work under Windows 7 and the older 4 antenna cards will work with bootcamp drivers.
4. Both of the non-detected carriers above, placed in the Z370 Gigabyte board, are detected in a Z270 Asus board. (Note the carrier LEDs light up green before boot, but when booted, a red led also lights up when inserted in the Z370 board, and no detection, not shown in HWInfo64 or the device manager, with or without hidden devices initiated.)
 
Last edited:
Joined
May 11, 2017
Messages
159
Motherboard
Asus TUF Gaming X570
CPU
AMD Ryzen 5900x
Graphics
RX 580
Mac
  1. Mac Pro
Mobile Phone
  1. iOS
Hey there,

I've got a small problem, I'm not sure it's doing anything.

Whenever I run KCPM to fix / clean up my kexts, it generates this long list of errors. Most of them has to do with my wifi. Unfortunately no matter how many times I run this, the problems persists.

Please help.
 

Attachments

  • Screen Shot 2018-08-24 at 07.24.04.png
    Screen Shot 2018-08-24 at 07.24.04.png
    2 MB · Views: 185
Joined
Jul 25, 2018
Messages
24
Motherboard
ASRock Z370 Extreme4
CPU
i9-9900k
Graphics
RX480
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Installed it today - annoyingly there is a badly placed Cap on my motherboard meaning the adapter card need to be fettled to fit the final M2 slot on the top left of the motherboard.

That same cap also gets in the way of the card being flat, so its inserted securely at an angle. Good news is that it does work.

Just waiting for the antennas to arrive to test if it actually works - but it has detected that it has WiFi and Bluetooth, just can't connect to anything for obvious reasons!

Half way there at least.

Installed pigtails now and it all works! (WiFi, Bluetooth, Airplay!)
 
Joined
Aug 24, 2018
Messages
17
Motherboard
ASUS P8Z77-I DELUXE
CPU
i5-3570K
Graphics
GTX 760
Mac
  1. iMac
Mobile Phone
  1. iOS
View attachment 304217
Broadcom WiFi/Bluetooth [Guide]


WiFi and Bluetooth working out of box on macOS with Apple branded Broadcom BCM94360. Enables half mini and M.2 BCM94352 on High Sierra with methods described below. Credit: RehabMan, Sherlocks

This thread does not support:
  • macOS/Continuity
  • Atheros/Qualcomm WiFi/Bluetooth
Change Log
v1.0 - 1/5/2018: 10.13/Broadcom WiFi/Bluetooth support

Previous thread: [Guide] Airport - PCIe Half Mini v2/Deprecated

Broadcom WiFi + BT
  • PCIe/x1: BCM94360CD - native WiFi/ac and BT4LE
  • PCIe/x1: BCM9331CD - native WiFi and BT4LE
  • M.2: BCM943602BAED/DW1830 - native WiFi/ac and BT4LE
    • Laptop issues/solutions, see jaymonkey/Post #138
  • M.2: BCM94352Z/AzureWave AW-CE162NF/DW1560 - supports WiFi/ac and BT4LE
  • M.2: BCM94350ZAE/DW1820A - native WiFi/ac and BT4LE
  • Half mini: BCM94360HMB/AzureWave AW-CB160H - native WiFi/ac and BT4LE
  • Half mini: BCM94352 HMB/AzureWave AW-CE123H - supports WiFi/ac and BT4LE
  • Half mini: BCM943224 HMB - native WiFi and BT3
Requirements
  • macOS 10.9 or newer
  • Supported Broadcom WiFi
  • Clover v4305 or newer
    • All installed patches must be updated to Clover Broadcom Patches, below
Broadcom WiFi/Bluetooth Repo
wireless_broadcom

Clover Broadcom Patches/Download (View Raw)
config-bcm94352-130.plist.zip

I. Broadcom WiFi/BT Installation/macOS 10.13+

WiFi Injection Methods (select one method, remove before installing a different method)
  1. kext enabler, FakePCIID/RehabMan
    • All supported Broadcom WiFi cards/AirPortBrcm4360.kext
    • README: RehabMan/OS-X-Fake-PCI-ID
    • Download: RehabMan / OS-X-Fake-PCI-ID
    • Install with kext installer to ~/Library/Extension:
      • FakePCIID.kext
      • FakePCIID_Broadcom_WiFi.kext
      • Install latest versions as available
    • Download config-bcm94352-1x0.plist.zip (above)
      • use AirPort.Brcm4360 patches (10.12)
    • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
      • 10.12+-BCM94352-fvco-darkvoid
      • 10.13/10.12 only
      • 10.11/10.10/10.9 patches - see VII. Previous macOS Support
  2. ssdt, 94352, see wireless_broadcom/ssdt_arpt
    • 10.13/Handoff not working with AirPort.BrcmNIC-MFG.kext
    • BCM94352 supported/AirPortBrcmNIC-MFG.kext
    • Verify IOReg/RP0x (wifi device name)
    • Select ssdt_arpt-rp0x-bcm4352
    • Download: select View Raw
    • Install to EFI/CLOVER/ACPI/patched/
    • Download config-bcm94352-1x0.plist.zip (above)
    • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
      • 10.13-BCM94352-fvco-darkvoid-Sherlocks
      • 10.13 only
      • 10.12/10.11/10.10/10.9 patches - see VII. Previous macOS Support
  3. kext, AirportBrcmFixup.kext/lvs1974
    • All supported Broadcom WiFi cards/AirPortBrcmNIC.kext
    • README/Download: AirportBrcmFixup
    • Lilu.kext README: GitHub - vit9696/Lilu
    • Lilu.kext Download: Releases · vit9696/Lilu
    • Install to EFI/CLOVER/kexts/Other/
      • AirportBrcmFixup.kext
      • Lilu.kext
      • Install latest versions as available
    • Non native/inject Brcm device_id (one method)
      • config.plist/Devices/FakeID/WIFI/0x43a014e4
Bluetooth Injection Method (10.13/10.12 /10.11 - all versions, 10.10/10.9 - see VII. Previous macOS Support)
  1. kext enabler, Brcm.../RehabMan
    1. All supported Broadcom WiFi cards
    2. Correctly configured USB, see [Guide] Creating a Custom SSDT for USBInjectAll.kext
    3. README: RehabMan/OS-X-BrcmPatchRAM
    4. Download: RehabMan / OS-X-BrcmPatchRAM
    5. Install to EFI/CLOVER/kexts/Other or kext installer to /System/Library/Extensions:
      • BrcmFirmwareRepo.kext
      • BrcmPatchRAM2.kext
      • Install latest versions as available
II. Additional Capabilities- Handoff, "Airport Extreme," Country Code, Whitelist
Handoff (10.13/10.12/10.11 - all versions, 10.10 - see VII. Previous macOS Support)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFiE
  2. Patches/Credit: lisai9093, #346 Airport - PCIe Half Mini
    • Binary patch: IOBluetoothFamily
      • Find: 48 85 FF 74 47 48 8B 07
      • Replace: 41 BE 0F 00 00 00 EB 44
  3. Installation
    • FakePCIID_Broadcom_WiFi.kext - working
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.11+-BT4LE-Handoff-Hotspot-lisai9093
    • Clover/kext patch - 10.13/not working
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.11+-BT4LE-Handoff-Hotspot-lisai9093
    • AirportBrcmFixup.kext/native - working
      • com.apple.driver.AirPort.BrcmNIC
"Airport Extreme" (10.13/10.12/10.11/10.10 - all versions)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFi (non Apple branded, cosmetic)
  2. Patches/Credit: Credit: Skvo, Post #135, Airport - PCIe Half Mini
    • Binary patch: AirPortBrcm4360
      • Find: 6B 10 00 00 75 0D
      • Replace: 6B 10 00 00 90 90
  3. Installation (one method only)
    • FakePCIID_Broadcom_WiFi.kext/native
    • Clover/kext patch
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10+-BCM94352-Airport-Extreme-skvo
    • AirportBrcmFixup.kext/native
ROW/WiFi Country Code (10.13/10.12/10.11/10.10 - all versions)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFi (4 cases, only one applies)
  2. Patches/Credit: Sebinouse, Post #1159/[Guide] Airport - PCIe Half Mini v2
    • Binary patch: AirPortBrcm4360 (one patch only)
      • Find: 41 83 FC FF 74 2C 48
        • Replace: 66 C7 06 55 53 EB 2B (55 53 - US)
        • Replace: 66 C7 06 xx xx EB 2B (xx xx - your CC)
        • Replace: 66 C7 06 23 61 EB 2B (#a, special case)
      • Find: 58 54 00 2B 18 2C 21 00 20 (XT/ROW, special case)
        • Replace: 58 54 00 0A 36 1C 47 00 0A
    • Valid AirPortBrcm4360 CCs:
      • AE AF AR AT AU AZ BD BE BG BN BR BT BY CA CH CL CN CO CR CY CZ DE DK DO EC EE EG ES FI FR GB GR GT GU HK HN HR HU ID IE IL IN IS IT JM JO JP KH KR KZ LA LI LK LT LU LV MA MM MN MO MT MV MX MY NI NL NO NP NZ PA PE PH PK PL PR PT PY RO RS RU SA SE SG SI SK SV TH TR TT TW UA US UY VE VI VN ZA
      • Convert CC to Hexadecimal - ASCII to Hex (i.e., US > 55 53)
  3. Installation
    • FakePCIID_Broadcom_WiFi.kext
      • Download config-bcm94352-1x0.plist.zip (above)
        • use AirPort.Brcm4360 patches (10.12)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10-10.11-BCM94352-5GHz-US-FCC-darkvoid
          • 10.12 US/FCC native, no patch required
        • edit BCM943xx/US-FCC for CC (above)
        • 10.11+-BCM94352-CC=#a-Ramalama
        • 10.11+-BCM94352-CC=XT-Skvo
    • Clover/kext patch (not tested)
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.13-BCM94352-CC-Sebinouse-(edit 55 53 to CC)-PMheart
          • 10.13 US/FCC native, no patch
        • edit BCM943xx/US-FCC for CC (above)
        • 10.13-BCM94352-CC=#a-Ramalama
        • 10.13-BCM94352-CC=XT-Skvo
    • AirportBrcmFixup.kext
      • config.plist/Boot/Arguments/Boot-arg "brcmfx-country=CC
WiFi Whitelist (10.13/10.12/10.11/10.10 - all versions)
  1. Requires AirPortBrcm4360, AirPortBrcmNIC or AirPortBrcmNIC-MFG/WiFi
  2. Patch/Disable Whitelist/Credit: RehabMan, Post #1722/[Guide] Airport - PCIe Half Mini v2
    • Binary patch: AirPortBrcm4360
      • Find: 31 DB 4C 3B 65 D8 75 12
      • Replace: 31 DB FF C3 90 90 90 90
  3. Installation
    • FakePCIID_Broadcom_WiFi.kext
      • Download config-bcm94352-1x0.plist.zip (above)
        • use AirPort.Brcm4360 patches (10.12)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.11+-Disable-Whitelist-check-RehabMan
    • Clover patch (not tested)
      • Download config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.13-Disable-Whitelist-check-RehabMan
    • AirportBrcmFixup.kext/native
III. Tools - Mount EFI, IOReg, MaciASL, Xcode
  1. Community Software/EFI Mounter v3
  2. IORegistryExplorer_v2.1.zip (select View Raw, double click)
  3. DPCIManager (select View Raw, double click)
  4. RehabMan/OS-X-MaciASL
  5. Property List Editors
IV. Problem Reporting - Post to this thread with requested information attached
  1. Description of WiFi/Bluetooth problem
  2. OS X version/motherboard model/BIOS version/processor/graphics
  3. Procedure/Guide used
  4. Copy of IOReg - IOReg_v2.1/File/Save a Copy As…, verify file (III. Tools 2.)
  5. Screenshots
    • DPCIManager/Status (III. Tools 3.)
    • System Information/Hardware/Network/WiFi
    • System Information/Hardware/Bluetooth
    • System Information/Hardware/USB (Select Bluetooth device)
  6. Clover (if installed)
    • EFI/CLOVER/config.plist
    • DPCIManager/Misc/Boot Log
    • EFI/CLOVER/ACPI/Patched/dsdt.aml (if WiFi edited)
    • EFI/CLOVER/ACPI/Patched/ssdt.aml (if WiFi edited)
  7. Put all files in a folder, compress and attach post on this thread
V. Requirements - macOS, native IO80211Family, Intel motherboards, SIP
  1. macOS
    1. 10.13+, see 4. SIP/1.
    2. 10.12+, see 4. SIP/1.
    3. 10.11+, see 4. SIP/1.
    4. 10.10+, see 4. SIP/2.
    5. 10.9+
    6. 10.8.5+
  2. Native IO80211Family.kext
    1. Remove any airport kext enabler
    2. Remove/Disable Clover Airport patches
      • config.plist/ACPI/DSDT/Fixes/FixAirport_4000/YES, set NO
      • config.plist/Devices/FakeID/Wifi/?, set 0x0
  3. Intel Motherboards
    1. Desktop 300/200/100/9/8/7/6 Series
    2. Workstation X299/X99/X79
  4. SIP (required to install/edit kexts and rebuild cache with unsigned kexts)
    1. System Integrity Protection (SIP)
    2. 10.13/10.12/10.11:
      • CLOVER/config.plist/RtVariables/
        • CsrActiveConfig/0x3 or 0x67
    3. 10.10:
      • Clover/config.plist/Boot/
        • Arguments/kext-dev-mode=1
VI. Broadcom - WiFi and Bluetooth, PCIe, M.2 and Half Mini
Details - macOS/Native
  • BCM94360CD, 2.4/5 GHz, ac+abgn, 3 Stream, 1300 Mbs + BT4LE (PCIe x1, not half mini)
  • BCM94331CD - 2.4/5 GHz, abgn, 3 stream, 450 Mbs + BT4LE (PCIe x1, not half mini)
  • BCM943224 HMB, 2.4/5 GHz abgn, 2 Stream, 300 Mbs + BT3
Broadcom Device_IDs (Vendor_ID: 14e4)
  1. Supported Device_ID (native)
    • 0x43ba- BCM943602BAED - 2.4/5 GHz, ac+abgn, 3 Stream, 1300 Mbs + BT4LE
    • 0x43a3 - BCM94350ZAE - 2.4/5 GHz, ac+abgn, 2 Stream, 867 Mbs + BT4LE
    • 0x43a0 - BCM94360CD, 2.4/5 GHz, ac+abgn, 3 Stream, 1300 Mbs + BT4LE
    • 0x4353 - BCM943224 HMB, 2.4/5 GHz abgn, 2 Stream, 300 Mbs + BT3
      • 10.10+/Whitelist
    • 0x4353 - BCM943224 HMS, 2.4/5 GHz abgn, 2 Stream, 300 Mbs
      • 10.10+/Whitelist
    • 0x4331 - BCM94331CD - 2.4/5 GHz, abgn, 3 stream, 450 Mbs + BT4LE
      • 10.10+/Whitelist
  2. Supported Device_IDs (injection required)
    • 0x43b1 - BCM94352 HMB/Z, 2.4/5 GHz, ac+abgn, 2 stream, 867 Mbs + BT4LE
    • 0x4357 - BCM943225 HMB, 2.4 GHz, bgn, 2 stream, 100 Mbs + BT3
  3. Unsupported Device_ID
    • 0x4359 - BCM943228 HMB, 2.4/5 GHz, abgn, 2 stream, 300 Mbs + BT4
VII. Previous macOS Support - 10.12/10.11/10.10/10.9
WiFi/94352 (10.12/10.11/10.10/10.9 - all version)
  1. 10.12 - fvco
    1. Credit: the-darkvoid #1, [FIX] macOS Sierra DP1 BCM94532Z WiFi
    2. Binary patch: AirPortBrcm4360
      • Find: 81 F9 52 AA 00 00 75 29
      • Replace: 81 F9 52 AA 00 00 66 90
    3. Installation
      • Clover/kext patchDownload (View Raw):
        • config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.12-BCM94352-fvco-darkvoid
  2. 10.11/10.10 - 5 GHz
    1. Credit: the-darkvoid #973, [Guide] Airport - PCIe Half Mini v2
    2. Binary patch: AirPortBrcm4360
      • Find: 41 83 FC FF 74 2C 48
      • Replace: 66 C7 06 55 53 EB 2B
    3. Installation
      • Clover/kext patchDownload (View Raw):
        • config-bcm94352-1x0.plist.zip (above)
      • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10-10.11-BCM94352-5GHz-US-FCC-darkvoid
  3. 10.9 - 5 GHz
  • Credit: Skvo #246, [Guide] Airport - PCIe Half Mini v2
  • Binary patch: AirPortBrcm4360
    • Find: 01 58 54
    • Replace: 01 58 58
  • Installation
    • Clover/kext patchDownload (View Raw):
      • config-bcm94352-1x0.plist.zip (above)
    • Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
      • 10.9-BCM94352-5 GHz - Skvo
BT (10.10/10.9 - all versions)
  1. kext enabler, BrcmPatchRAM/darkvoid
  2. Releases · robvanoostenrijk/BrcmPatchRAM · GitHub
    • BrcmPatchRAM.kext
  3. Installation (1 or 2, not both)
    • Clover/EFI/CLOVER/kexts/10.10 (or 10.9)
    • /System/Library/Extensions
BT Handoff (10.10 - all versions)
  1. Wi-Fi, Bluetooth, AirDrop, Handoff and Instant Hotspot
  2. Patch/Credit: Dotkterdok
    1. 10.10.2 and newer: Handoff (working)/Hotspot (not tested)
      1. Binary patch: IOBluetoothFamily
        • Find: 48 85 C0 74 5C 0F B7 48
        • Replace: 41 BE 0F 00 00 00 EB 59
    2. 10.10 and 10.10.1, Handoff (working)/Hotspot
      1. Binary patch: IOBluetoothFamily
        • Find: 8B 87 8C 01 00 00
        • Replace: B8 0F 00 00 00 90
  3. Installation
    1. Clover/kext patch
      1. Download (View Raw): config-bcm94352-1x0.plist.zip (above)
      2. Paste patch to config.plist/KernelAndKextPatches/KextsToPatch
        • 10.10-10.10.1-BT4LE-Handoff-Hotspot-Dokterdok
        • 10.10.2+-BT4LE-Handoff-Hotspot-Dokterdok
VIII. Installed WiFi/BT? - Vendor ID, Product IDs
  1. Determine WiFi Card Device_ID
    • Download, install and run DPCIManager (III. Tools 3.)
    • Find Vendor-ID 14E4 (Broadcom) in DPCIManager/PCI
    • Note Device_ID and verify with supported Device_IDs above.
    • Example: Vendor/Device ID is 14E4/4357 > BCM943225
  2. Determine WiFi Card/Bluetooth ProductID/VendorID
    • System Information/Hardware/USB
    • Select ".. Bluetooth…"/BCM207020A
    • ProductID/Convert hex to decimal/Ex. 0x217d = decimal 8573
    • VendorID/Convert hex to decimal/Ex. 0x0a5c = decimal 2652 (Broadcom)

Credit
THe KiNG http://www.projectosx.com/forum/index.php?showtopic=1416
Andy Vandijck http://www.insanelymac.com/forum/index.php?showtopic=234570
Skvo Broadcom BCM94352HMB - the new flagship of kombomoduley supporting 802.11ac (41855) | AppleLife
Skvo, #758/[Guide] Airport - PCIe Half Mini v2
the-darkvoid [FIX] macOS Sierra DP1 BCM94532Z WiFi
lisai9093, #346 Airport - PCIe Half Mini
Sherlocks, #297, [pre-release] macOS High Sierra
RehabMan, #90

Hello,

Was just wondering would this guide work with AW-NB111H ( BCM943228HMB ) see pic...
Regards Gareth
 

Attachments

  • IMG_4646.jpg
    IMG_4646.jpg
    1,022.3 KB · Views: 188
Last edited:
Top