Contribute
Register

Both SATA RAID Controller and NVMe SSD are not detected

Status
Not open for further replies.
If your SSD is SATA, did you read the guide regarding SATA-100-series-unsupported.kext?
If your SSD is NVMe, did you read the FAQ regarding NVMe?
Read.
I wonder if my RAID controller is identified by installer or not.
I've tried to add patch in config.plist but still not detected.
 
Read.
I wonder if my RAID controller is identified by installer or not.
I've tried to add patch in config.plist but still not detected.

If your SATA is in RAID mode, you need SATA-RAID-282a.kext.
Please read the guide carefully.
 
If your SATA is in RAID mode, you need SATA-RAID-282a.kext.
Please read the guide carefully.
Always using SATA-RAID-282a.kext
but it's empty in SATA/PCI/ATA/NVMe as #11
 
Always using SATA-RAID-282a.kext
but it's empty in SATA/PCI/ATA/NVMe as #11

Attach output from 'lspci -nn' in Linux Terminal.
Attach EFI/Clover as ZIP (remove 'themes').
Describe actual SSDs/HDDs installed (eg. number of drives, type, etc).
 
Attach output from 'lspci -nn' in Linux Terminal.
Attach EFI/Clover as ZIP (remove 'themes').
Describe actual SSDs/HDDs installed (eg. number of drives, type, etc).

Code:
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI [8086:9d3a] (rev 21)
00:17.0 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 21)
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:9d10] (rev f1)
00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:9d18] (rev f1)
00:1d.1 PCI bridge [0604]: Intel Corporation Device [8086:9d19] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
01:00.0 3D controller [0302]: NVIDIA Corporation Device [10de:134b] (rev a2)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01)
08:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0042] (rev 31)

A single SAMSUNG PM951 256GB SSD (MZVLV256) only
 

Attachments

  • Clover 11.zip
    3.3 MB · Views: 125
Code:
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI [8086:9d3a] (rev 21)
00:17.0 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 21)
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:9d10] (rev f1)
00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:9d18] (rev f1)
00:1d.1 PCI bridge [0604]: Intel Corporation Device [8086:9d19] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21)
01:00.0 3D controller [0302]: NVIDIA Corporation Device [10de:134b] (rev a2)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01)
08:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0042] (rev 31)

A single SAMSUNG PM951 256GB SSD (MZVLV256) only

Your EFI/Clover is not per guide. Start over and follow the guide as written.

https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 

Attachments

  • CLover 11.zip
    2 MB · Views: 85
Am i right?
Still not detected..
Also ,I noticed IONVMeFamily.kext is not loaded when booting installation stick.(shown in System Information)

According to your lspci output, you have no NVMe drive installed.
Have you verified your hardware is functional?
 
According to your lspci output, you have no NVMe drive installed.
Have you verified your hardware is functional?
Yes.There's a windows OS on it which i'm using right now.
upload_2016-10-6_23-11-36.png

confused...
 
Yes.There's a windows OS on it which i'm using right now.
View attachment 214334
confused...

Seems like you're going to need to do some investigation as to why it doesn't show in Linux or OS X...
Without it active on the PCIe bus, there is no hope.
Perhaps it is a BIOS issue.
 
Status
Not open for further replies.
Back
Top