- Joined
- Oct 5, 2013
- Messages
- 41
- Motherboard
- Lenovo IdeaPad 710s 13ISK
- CPU
- i5-6200U
- Graphics
- NVIDIA 940MX 2GB (1920*1080) / Intel® HD Graphics 520 (1920*1080)
Hello.
I have SATA Raid Controller(0x282a8086) and SSD(SAMSUNG PM951).
I can boot into the installation menu,but disk utility detects only my USB drives
In System Information,ATA/SATA/Hardware RAID/NVMExpress/PCI all says "This computer doesn't contain ***"
My BIOS has no option to switch the SATA mode.
I was trying to install 10.11
I have tried: (put kext into /EFI/Clover/kexts/10.11)
AHCI_3rdParty_SATA.kext
IOAHCIBlockStorageInjector.kext
SATA-10-series-8086-a103.kext(Change a103 to 282a)
SATA-RAID-282a.kext
SATA-100-series-unsupported.kext(added <string>pci8086,282a</string>)
Clover Fake SATA ID(Tried 0x28298086 and 0x28228086)
SSDT(https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/hotpatch/SSDT-SATA.dsl)
Also tried insert the SSDT fix into DSDT
no one is working
As for the SSD,i think it can't be identified without the controller detected,am i right?
But i still tried these: (without controller detected)
Clover KextsToPatch (in config.plist in attachment)
HackrNVMeFamily-10_11_6.kext
NVMeGeneric.kext
none of them are working...Help me please.
Sorry for my basic English.
Original DSDT/SSDTs and Patched(injected 2829) DSDT/SSDT-1 is in attachment.(both SSDT-1 and DSDT contains SAT0)
config.plist is from pcbeta(Chinese hackintosh forum),the config provider claims that he has solved most problems but RAID controller.
With config_HD520_530_540.plist,I can't boot into installation menu(No interval found->Still waiting for root device->screen crashed)
Tried USBInjectAll、USBXHC.
Thank you.
My laptop:
Lenovo Air 13 Pro(Clover)
I5-6200U
NVIDIA 940MX 2GB (1920*1080) / Intel® HD Graphics 520 (1920*1080)
SAMSUNG PM951 256GB NVMe
I have SATA Raid Controller(0x282a8086) and SSD(SAMSUNG PM951).
I can boot into the installation menu,but disk utility detects only my USB drives
In System Information,ATA/SATA/Hardware RAID/NVMExpress/PCI all says "This computer doesn't contain ***"
My BIOS has no option to switch the SATA mode.
I was trying to install 10.11
I have tried: (put kext into /EFI/Clover/kexts/10.11)
AHCI_3rdParty_SATA.kext
IOAHCIBlockStorageInjector.kext
SATA-10-series-8086-a103.kext(Change a103 to 282a)
SATA-RAID-282a.kext
SATA-100-series-unsupported.kext(added <string>pci8086,282a</string>)
Clover Fake SATA ID(Tried 0x28298086 and 0x28228086)
SSDT(https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/hotpatch/SSDT-SATA.dsl)
Also tried insert the SSDT fix into DSDT
no one is working
As for the SSD,i think it can't be identified without the controller detected,am i right?
But i still tried these: (without controller detected)
Clover KextsToPatch (in config.plist in attachment)
HackrNVMeFamily-10_11_6.kext
NVMeGeneric.kext
none of them are working...Help me please.
Sorry for my basic English.
Original DSDT/SSDTs and Patched(injected 2829) DSDT/SSDT-1 is in attachment.(both SSDT-1 and DSDT contains SAT0)
config.plist is from pcbeta(Chinese hackintosh forum),the config provider claims that he has solved most problems but RAID controller.
With config_HD520_530_540.plist,I can't boot into installation menu(No interval found->Still waiting for root device->screen crashed)
Tried USBInjectAll、USBXHC.
Thank you.
My laptop:
Lenovo Air 13 Pro(Clover)
I5-6200U
NVIDIA 940MX 2GB (1920*1080) / Intel® HD Graphics 520 (1920*1080)
SAMSUNG PM951 256GB NVMe
Last edited:
