- Joined
- Feb 14, 2013
- Messages
- 24
- Motherboard
- Asus p8z68 pro gen 3
- CPU
- i7-2600K
- Graphics
- GTX 550 Ti
- Mac
- Mobile Phone
bootloader
- Thread starter flordetoxo
- Start date
- Status
- Joined
- Mar 2, 2014
- Messages
- 2,031
- Motherboard
- Gigabyte Z390 I AORUS PRO WIFI
- CPU
- i9-9900K
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
Assuming your startup is successful and you are using OpenCore, you can avoid "verbose" booting (that display) by opening your config.plist in PlistEdit Pro (for instance) and then selecting "NVRAM/Add/7C436110-AB2A-4BBB-A880-FE41995C9F82" and looking at "boot-args." In the "Value" column, delete "-v" and save your config.plist. Again, if your system is successfully booting, you can delete "keepsyms=1" also, and just leave the "boot-args" string value blank.
(Of course, if your boot process was hanging at that point, you will just lose the information on your screen, and your system will still not boot.)
(Of course, if your boot process was hanging at that point, you will just lose the information on your screen, and your system will still not boot.)
- Status