boot0 error with 3tb seagate, have tried all bootloaders.

[littlecreature]

Hi,

I have a p5w hackintosh which I have been lately booting off a 2tb drive with chameleon as bootloader.

I just installed a 3tb seagate and despite trying chimera, chameleon, et al, I have not been able to get the drive to boot off itself. I have tried the installers and manual installs. The workaround is to boot off a USB key with chameleon there.

Does anyone have any tips?

 

[littlecreature]

solved this by unmounting the disk and doing dd if=boot1h of=/dev/rdisk0s2 bs=4096 with chameleon. I also marked the partition as active, not sure if that was necessary. The difference was I had not used the bs=4096 option.