Boot0 error in Haswell

[woodyargentina]

Hi! I'm purchase this machine:

- INTEL CORE I7 4770K HASWELL 3.5
- GA-Z87X-UD5H
- 32 GB
- HD 1TB SATA3 BARRACUDA
- Asus Geforce Gtx660 Directcu II 2gb Ddr5 Pci-e
- Fuente 600w

Install ok snow leopard, but when I'm install Multibeast, don't boot! boot0 error please help!!!

salud!

 

[Craigrox]

Hi! I'm purchase this machine:

- INTEL CORE I7 4770K HASWELL 3.5
- GA-Z87X-UD5H
- 32 GB
- HD 1TB SATA3 BARRACUDA
- Asus Geforce Gtx660 Directcu II 2gb Ddr5 Pci-e
- Fuente 600w

Install ok snow leopard, but when I'm install Multibeast, don't boot! boot0 error please help!!!

salud!

Well documented problem: http://www.tonymacx86.com/25-boot0-error-official-guide.html
Remember to use the search feature or simply google your problem, it's likely other people have encountered it before!

 

[Going Bald]

Hi! I'm purchase this machine:

- INTEL CORE I7 4770K HASWELL 3.5
- GA-Z87X-UD5H
- 32 GB
- HD 1TB SATA3 BARRACUDA
- Asus Geforce Gtx660 Directcu II 2gb Ddr5 Pci-e
- Fuente 600w

Install ok snow leopard, but when I'm install Multibeast, don't boot! boot0 error please help!!!

salud!

Forget install MultiBeast in Snow Leopard with Haswell hardware - will never boot from hard drive. Just download Mavericks from MAS, make UniBeast install USB and install Mavericks. Then run MultiBeast and worry about fixing boot0 error if it happens.

 

[totenkopf4]

Hi! I'm purchase this machine:

- INTEL CORE I7 4770K HASWELL 3.5
- GA-Z87X-UD5H
- 32 GB
- HD 1TB SATA3 BARRACUDA
- Asus Geforce Gtx660 Directcu II 2gb Ddr5 Pci-e
- Fuente 600w

Install ok snow leopard, but when I'm install Multibeast, don't boot! boot0 error please help!!!

salud!

woody
As Going Bald says...we do not use MultiBeast on this hardware as it is HASWELL.

You will Boot from the HASWELL IBOOT CD until you get Mavericks installed.

Start w iBOOT HASWELL - install OSX SL 10.6.3 - update to 10.6.8 - get to Apple App store - download the Mavericks file and make the USB thumb drive - 8GB with UniBeast. Then Install OSX Mavericks. You should not see the Boot 0 error during these steps as this is related to the boot loader on the HD which is not needed if you use HASWELL IBOOT to do all the Booting from.