Contribute
Register

Boot up taking close to a minute on SSD! GAZ77X-UD5H

Joined
Dec 30, 2012
Messages
2
Motherboard
Z77X-UD5H, 16gb Corsair, 240gb mushkin SSD, StormTrooper case, 1250W OCZ PSU, Vantage Watercooled,
CPU
i5-3570K
Graphics
Asus Gtx670
Mac
MacBook Air, MacBook Pro, Mac mini
Classic Mac
Mobile Phone
iOS
Hi guys. Long time reader, first time hackintosher (is that even a word?!)

Thanks for all the support that you give in the forums. It's really awesome learning from the experiences of others rather than feeling the pain of wasted hours yourself. I only had to reinstall 4 times - that's only because i read the forums AFTER...

I have an SSD as a boot drive that takes an abnormal amount of time to boot. (it is also cloned with super duper - allowing me to fiddle without worry)

At first I wanted to post: "My system displays the apple logo and takes a long time to boot"! But then, i figured that joke has been long overkilled - so i'll skip it :p

I copied the system log and pulled out all the errors that i found from my most recent reboot.

I would very much appreciate a more experienced eye perusing this log and letting me know what kexts to nuke, and specifically what is slowing down the boot process. I would do it myself, except, I can't really tell where the pauses are. I even rebooted multiple times in verbose to see where it is pausing and it really isn't except when it gets to the end of the verbose list just before the grey screen comes up. It sits there for at least 10-15 seconds.

Any thoughts would be appreciated. (If I am in posting in the wrong area, please move this)

(please refer to my profile for my sys specs)

Thanks guys :)

Log below:


Jan 6 21:32:48 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination


Jan 6 21:32:49 localhost kernel[0]: USBF: 2. 59 The IOUSBFamily did not receive enough extra current for the SuperSpeed device (4-Port USB 3.0 Hub) at 0x14b00000, asked for 400mA but got 0 mA
Jan 6 21:32:49 localhost kernel[0]: USBF: 2.230 The IOUSBFamily did not receive enough extra current for the SuperSpeed device (4-Port USB 3.0 Hub) at 0x14c00000, asked for 400mA but got 0 mA


Jan 6 21:32:49 localhost kernel[0]: WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a
Jan 6 21:32:49 localhost kernel[0]: -- power management may be incomplete or unsupported


Jan 6 21:32:53 Homes-Mac-Pro.local loginwindow[82]: Login Window Application Started
Jan 6 21:32:53 Homes-Mac-Pro com.apple.launchd[1] (com.apple.ManagedClient[105]): Check-in of Mach service failed. Already active: com.apple.ManagedClient.agent
Jan 6 21:32:53 Homes-Mac-Pro com.apple.launchd[1] (com.apple.ManagedClient[105]): Exited with code: 7
Jan 6 21:32:53 Homes-Mac-Pro com.apple.launchd[1] (com.apple.ManagedClient): Throttling respawn: Will start in 10 seconds
Jan 6 21:32:53 --- last message repeated 1 time ---


Jan 6 21:32:53 Homes-Mac-Pro.local apsd[97]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Jan 6 21:32:53 --- last message repeated 1 time ---


Jan 6 21:32:53 Homes-Mac-Pro.local locationd[83]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Jan 6 21:32:53 Homes-Mac-Pro.local locationd[83]: NOTICE,Location icon should now be in state 0
Jan 6 21:32:54 Homes-Mac-Pro.local configd[17]: network changed: v4(en0+:192.168.0.25) DNS+ Proxy+ SMB
Jan 6 21:32:57 Homes-Mac-Pro.local ntpd[61]: proto: precision = 1.000 usec
Jan 6 21:33:04 Homes-Mac-Pro.local stackshot[69]: Timed out waiting for IOKit to finish matching.
Jan 6 21:33:04 Homes-Mac-Pro.local apsd[97]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Jan 6 21:33:09 Homes-Mac-Pro.local awacsd[95]: Exiting


Jan 6 21:33:21 Homes-Mac-Pro.local WindowServer[112]: mux_initialize: Couldn't find any matches
Jan 6 21:33:21 Homes-Mac-Pro kernel[0]: GFX0: Not usable


Jan 6 21:33:21 Homes-Mac-Pro.local loginwindow[82]: Login Window Started Security Agent
Jan 6 21:33:21 Homes-Mac-Pro.local locationd[149]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Jan 6 21:33:21 Homes-Mac-Pro.local locationd[149]: NOTICE,Location icon should now be in state 0
Jan 6 21:33:21 Homes-Mac-Pro.local UserEventAgent[143]: cannot find useragent 1102
Jan 6 21:33:21 Homes-Mac-Pro.local SecurityAgent[150]: This is the first run
Jan 6 21:33:21 Homes-Mac-Pro.local SecurityAgent[150]: MacBuddy was run = 0
Jan 6 21:33:21 Homes-Mac-Pro.local WindowServer[112]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x28d9ff40 device: 0x10bebd320 isBackBuffered: 1 numComp: 3 numDisp: 3
Jan 6 21:33:21 Homes-Mac-Pro.local SecurityAgent[150]: *** WARNING: -[NSImage compositeToPoint:eek:peration:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:eek:peration:fraction:] instead.
Jan 6 21:33:21 Homes-Mac-Pro.local SecurityAgent[150]: *** WARNING: -[NSImage compositeToPoint:fromRect:eek:peration:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:eek:peration:fraction:] instead.
Jan 6 21:33:23 Homes-Mac-Pro.local WindowServer[112]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.


Jan 6 21:33:26 Homes-Mac-Pro.local authorizationhost[159]: in od_principal_for_user(): No authentication authority returned
Jan 6 21:33:26 Homes-Mac-Pro.local authorizationhost[159]: in od_principal_for_user(): failed: 7
Jan 6 21:33:26 Homes-Mac-Pro.local authorizationhost[159]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Jan 6 21:33:26 Homes-Mac-Pro.local authorizationhost[159]: in pam_sm_authenticate(): Done cleanup3
Jan 6 21:33:26 Homes-Mac-Pro.local authorizationhost[159]: in pam_sm_authenticate(): Kerberos 5 refuses you
Jan 6 21:33:26 Homes-Mac-Pro.local authorizationhost[159]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm


Jan 6 21:33:26 Homes-Mac-Pro.local authorizationhost[159]: in pam_sm_setcred(): pam_sm_setcred: krb5 user homestudio doesn't have a principal


an 6 21:33:26 Homes-Mac-Pro com.apple.launchd.peruser.501[160] (com.apple.gamed): Ignored this key: UserName
Jan 6 21:33:26 Homes-Mac-Pro com.apple.launchd.peruser.501[160] (com.apple.gamed): Ignored this key: GroupName
Jan 6 21:33:26 Homes-Mac-Pro com.apple.launchd.peruser.501[160] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Jan 6 21:33:26 Homes-Mac-Pro.local loginwindow[82]: Connection with distnoted server was invalidated


Jan 6 21:33:27 Homes-Mac-Pro.local WindowServer[112]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed


Jan 6 21:33:36 Homes-Mac-Pro.local locationd[240]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Jan 6 21:33:36 Homes-Mac-Pro.local locationd[240]: NOTICE,Location icon should now be in state 0
Jan 6 21:33:37 Homes-Mac-Pro.local ut*****t[236]: *** WARNING: -[NSImage compositeToPoint:eek:peration:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:eek:peration:fraction:] instead.
Jan 6 21:33:37 Homes-Mac-Pro.local ut*****t[236]: *** WARNING: -[NSImage compositeToPoint:fromRect:eek:peration:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:eek:peration:fraction:] instead.
 

Attachments

Last edited by a moderator:
Joined
May 3, 2012
Messages
165
Motherboard
Gigabyte X79-UD3
CPU
i7 X9730k
Graphics
Nvidia GeForce GTX670 OC
Mac
MacBook Pro
Classic Mac
Mobile Phone
Android
My boot time was also lagging and then the system would crash everytime it would boot into the OS. None of the standard flags worked (-x, -v, -f). UseKernelCache=0. The only thing that worked was PCIRootUID=1 (which is strange since all my other hacks use PCIRootUID=0)...this worked once, so I went in and dropped PCIRootUID=0 from my .plist; but now after login, the system either crashes (when USB3.0 hub is plugged in) or freezes (any and all flags).

Any luck?
 
Joined
Dec 12, 2012
Messages
89
Motherboard
GA-X99-Ultra Gaming
CPU
i7-6950x
Graphics
RX Vega 64
Mac
MacBook Air, MacBook Pro, Mac mini
Mobile Phone
iOS
I had the same issue. I desabled any onboard graphics related options in BIOS and that fixed for me, boot time 12 sec
 
Joined
Dec 8, 2011
Messages
18
Motherboard
GA-Z77-DS3H
CPU
i7 3770
Graphics
GTX560Ti
Mac
MacBook Pro
Classic Mac
Mobile Phone
iOS
I had the same issue. I desabled any onboard graphics related options in BIOS and that fixed for me, boot time 12 sec
woow...
thanks drevan!
your solution save like 36' to my boot time.
i use Z77-DS3H with sandisk SSD as recommended in customac.
before setting "internal Graphics" in BIOS to "disabled", i got 38-41 boot time.
after applying your solution, it took only 10-12 sec.

thanks so much for sharing!
 

fwp

Joined
May 18, 2012
Messages
60
Motherboard
Z77X-UD5H
CPU
3770
Graphics
HD4000
Mac
Mac mini
Classic Mac
Mobile Phone
iOS
I have the same board and when I first installed OSX I had the same problem. Turned out I was using VGA and when I switched to the dvi port the boot time went to ~15 sec.
 
Top