Boot Problem + do not recognize intel processor

[Molti]

Hi, is my first hackintosh installation.
I have:
Mother Gigabyte Z370 HD3
Intel I-5 Coffe Lake 8600k
Graphics Card Gigabyte Geforce GTX 1050 LowProfile 2Gb
1 x DDR4 Kingstone 8gb 2666Mhz
1 x Segate Barracuda SSD 250 Gb
EVGA 650Watts Gold.
I try install Yosemite and never could start the instalation. Then.
I can install Sierra 10.12.6 whit Unibeast. But Then i can't do the OSx recognize the Intel I-5 8600k and can't boot from the SSD (the only way i can boot is through the USB boot installer)
When the computer boot through the HDD, start loading with the black screen and Apple logo, and when finish loading, change the apple logo to the forbidden logo and stuck there.

 

[BreBo]

When the computer boot through the HDD, start loading with the black screen and Apple logo, and when finish loading, change the apple logo to the forbidden logo and stuck there.

Coffee Lake hardware is not supported on Sierra.
You will need macOS High Sierra 10.13.0 or higher.

"Still waiting for root device".
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Make sure Fast Boot is not activated in your BIOS.

May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/
May require XHCI-unsupported.kext in EFI/CLOVER/kexts/Other/

 

[Molti]

Thanks, so you says that I couldn't do a good installation with Sierra?
The pics is whitout The boot USB plug, whit The USB plug the system boot.

 

[Molti]

Coffee Lake hardware is not supported on Sierra.
You will need macOS High Sierra 10.13.0 or higher.

"Still waiting for root device".
When installing this means that your USB flash drive cannot be found.
This is usually because the flash drive is in a USB3 port.
If this is the case move it to a USB2 port, if it is already in a USB2 port move it to another and try again.
Repeat until you have tried all USB ports.
Use a USB2 flash drive.
If it still doesn't work you could try another flash drive.
You might also try enabling Legacy on your USB3 ports in your BIOS settings.
If you only have USB3 ports try with your USB flash drive in a USB2 hub.
Make sure Fast Boot is not activated in your BIOS.

May require USBInjectAll.kext in /EFI/CLOVER/kexts/Other/
May require XHCI-unsupported.kext in EFI/CLOVER/kexts/Other/

Thanks a lot, i don't have XHCI-unsupported.kext. Add this on the USB EFI and boot normaly.
Now i traing to recognize de I5 Cofee Lake.