boot:gpt boot:test boot:test boot:test boot:gpt boot:test boot:test boot:test boot: error

[misterzx]

Intel core i7 3,41
Asus Sabertooth p67
8 gb 1333 ddr3
nvidia gforce gtx 660
OS X 10.8.4

boot:gpt
boot:test
boot:test
boot:test
boot:gpt
boot:test
boot:test
boot:test
boot: error

Help

 

[iDevSocial]

You didn't searched. This is what I found here on the forum:

Requires use of the Terminal and UniBeast drive.

How To Do it:
1. Install using UniBeast
2. Boot new installation using UniBeast.
3. Run MultiBeast and install as normal
4. Reboot system back into Lion installer.
5. Run Disk Utility and unmount the drive you installed OS Lion on.
6. Launch Terminal and execute the following command:

dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2

7. Exit Terminal
8. Reboot Normally

NOTE: The above instructions are based on OS X being installed to a hard drive connected to SATA port 0. If you are using a different port you will need to get the drive device name from Disk Utility by selecting the volume and clicking Info.

 

[baller1308]

More or less the same info as the previous reply. http://www.tonymacx86.com/25-boot0-error-official-guide.html

 

[misterzx]

I Might explain the point 5, thanks