Boot from USB doesn't work on Skylake

[tolekk]

My issue is, that after setting up bios according to the guide, I can't boot Clover from USB, no matter what I try.

1. I rebooted my PC.
2. POST appeared
3. Black screen appears
4. "_" flashes a couple of times
5. BIOS opens up.

I've tried to fix it for a while now, and I'd really appreciate some help.

 

[bmoag]

I suggest you read the motherboard manual about how to set the motherboard to boot from a particular device.
ASUS makes you jump though a few hoops.

 

[tolekk]

I just read the manual, and the only thing that it mentions is Secure Boot - which I turned off and set the OS to "Other OS".
If you know anything that can help, then please reply

I forgot to mention that my manual is in Polish so it may differ from the english version.

 

[mistikbeaver]

I have the exact same problem that tolekk is describing.

I have followed the steps described in the guide to a dime: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/

The USB simply won't boot.

1. I rebooted my PC.
2. POST appeared
3. Black screen appears
4. "_" flashes a couple of times
5. BIOS opens up.

1 for 1 my error message. I appreciate any help.

 

[tolekk]

Ok, I've managed to fix the issue by simply not using UniBeast for the install.
I suggest you to use older tutorials, because they explain the process better.

 

[mistikbeaver]

Ok, I've managed to fix the issue by simply not using UniBeast for the install.
I suggest you to use older tutorials, because they explain the process better.

Could you go into a little more detail? I'd appreciate if you could link me to what you actually did.

 

[tolekk]

Just use Clover instead of UniBeast.
You can find many threads about how to use Clover!
https://www.tonymacx86.com/threads/how-to-install-os-x-yosemite-using-clover.144426/ <-- use this, it really helped me