Bluetooth not working with Broadcom BCM943602CS

[Limboistik]

Hey everyone,

So I successfully got Mojave 10.14.4 working but for the life of me can't get Bluetooth working at all. I purchased the BCM943602CS Wifi/BT card which is suppose to work out of the box, the Wifi works but Bluetooth does not.

I have already connected the included cable to a USB header on the mobo.

Mojave 10.14.4

Kext added to EFI:

• AppleALC.kext v1.3.7
• IntelMausiEthernet.kext v2.4.1d1
• Lilu.kext v1.3.5
• SMCBatteryManager.kext v1
• SMCLightSensor.kext v1
• SMCProcessor.kext v1.0.3
• SMCSuperIO.kext v1.0.3
• USBInjectAll.kext v0.7.1
• VirtualSMC.kext v1.0.3
• WhateverGreen.kext v1.2.8

Hardware:

• CPU: i7 8700 (non-K version)
• GPU: MSI OC 8gb RX 570
• RAM: 32gb Corsair Vengeance DDR4 3000 (2 x 16gb in slot A2 and B2)
• Motherboard/Laptop model: Asus Prime Z370-A II
• Wifi/BT Card: Broadcom BCM943602CS - Bought from eBay

System Info Screenshots:

• Bluetooth Hardware Info: https://cl.ly/6c9d4c8313b5
• USB Hardware Info: https://cl.ly/b5a51b79db30

What files/config I am using:

• Essentials List: https://www.dropbox.com/s/c9q65pnrd30cjpq/EssentialsList-2019-05-21 16.09.09.zip?dl=0

 

[trs96]

All of the above (- the ram) should be listed in your profile. Fill that out so it shows up in all your future posts.

https://www.tonymacx86.com/account/account-details

 

[Limboistik]

View attachment 407698

All of the above (- the ram) should be listed in your profile. Fill that out so it shows up in all your future posts.

https://www.tonymacx86.com/account/account-details

Thanks! Added to my profile as you asked

 

[trs96]

You're going to need to configure your USB ports with a custom USB SSDT so that the BT's USB 2.0 header is functional. Then BT will work if you've got that resolved.

A Beginner's Guide to Creating a Custom USB SSDT

If the prospect of reading through complex guidance to configure your USB ports gives you the heebie-jeebies then this guide is for you. We’ve pared it to the bone, researched the facts and tried to present them in a way that makes this complex subject easier to understand for someone just...

www.tonymacx86.com

 

[Limboistik]

You're going to need to configure your USB ports with a custom USB SSDT so that the BT's USB 2.0 header is functional. Then BT will work if you've got that resolved.

A Beginner's Guide to Creating a Custom USB SSDT

If the prospect of reading through complex guidance to configure your USB ports gives you the heebie-jeebies then this guide is for you. We’ve pared it to the bone, researched the facts and tried to present them in a way that makes this complex subject easier to understand for someone just...

www.tonymacx86.com

Ok so I added a custom USB SSDT and now bluetooth is completely unavailable.

Here's my ports according IO Reg: https://cl.ly/4db1bea94281

Also attached the DSL I created. Not sure if I entered everything correctly?

If I understand correctly:

• For a USB bus on the motherboard in the DSL I should put "UsbConnector" as 255?
• If the address in IOReg is "port <0e 00 00 00>", in the DSL I put "Buffer() { 0x0e, 0, 0, 0 }"?

Thank you.

 

[trs96]

Ok so I added a custom USB SSDT and now bluetooth is completely unavailable.

It would be best to post your USB SSDT questions in the beginners guide thread so that others attempting one with the same motherboard can also learn how it's done.