Contribute
Register

Bluetooth is not recognized on my build using BCM94352Z card

Status
Not open for further replies.
Joined
Mar 3, 2018
Messages
14
Motherboard
ASUS Maximus XI Code Z390
CPU
i9-9900K
Graphics
RX 570
Mac
  1. iMac
Mobile Phone
  1. iOS
I wanted to get handoff working properly on my Hackintosh, so I bought this card: https://www.amazon.com/gp/product/B0156DVQ7G/?tag=tonymacx86com-20 and replaced the WIFI/BT card that came with my motherboard (Asus Rog Strix Z370-i Gaming).

Wifi is working great, but I can't get it to recognize Bluetooth.

I attached my config.plist file. Here is the list of Kexts that I have currently:
  • AppleALC.kext
  • FakePCIID_Broadcom_WiFi.kext
  • FakePCIID.kext
  • FakeSMC_ACPISensors.kext
  • FakeSMC_CPUSensors.kext
  • FakeSMC_GPUSensors.kext
  • FakeSMC_LPCSensors.kext
  • FakeSMC.kext
  • IntelMausiEthernet.kext
  • Lilu.kext
  • NvidiaGraphicsFixup.kext
  • USBInjectAll.kext
  • XHCI-300-series-injector.kext
  • BrcmPatchRAM2.kext
  • BrcmFirmwareRepo.kext
Also, from my readings on this forum it looks like some people connect their BT to a USB port, not sure how to do that since I don't have a port for that.
 

Attachments

  • config.plist
    24 KB · Views: 212
Joined
Mar 16, 2011
Messages
22
Motherboard
Asus ROG Strix Z370-I Gaming
CPU
8700K
Graphics
Intel UHD630
I wanted to get handoff working properly on my Hackintosh, so I bought this card: https://www.amazon.com/gp/product/B0156DVQ7G/?tag=tonymacx86com-20 and replaced the WIFI/BT card that came with my motherboard (Asus Rog Strix Z370-i Gaming).

Wifi is working great, but I can't get it to recognize Bluetooth.

I attached my config.plist file. Here is the list of Kexts that I have currently:
  • AppleALC.kext
  • FakePCIID_Broadcom_WiFi.kext
  • FakePCIID.kext
  • FakeSMC_ACPISensors.kext
  • FakeSMC_CPUSensors.kext
  • FakeSMC_GPUSensors.kext
  • FakeSMC_LPCSensors.kext
  • FakeSMC.kext
  • IntelMausiEthernet.kext
  • Lilu.kext
  • NvidiaGraphicsFixup.kext
  • USBInjectAll.kext
  • XHCI-300-series-injector.kext
  • BrcmPatchRAM2.kext
  • BrcmFirmwareRepo.kext
Also, from my readings on this forum it looks like some people connect their BT to a USB port, not sure how to do that since I don't have a port for that.

Take a look at my post:

Bluetooth not working after update to 10.13.6

You have to put BrcmPatchRAM2 and BrcmFirmwareRepo kexts into /Library/Extensions. Remember about proper file permissions.
 
Status
Not open for further replies.
Top