<< Solved >> BlueToolFixup no working.

[pelayo]

Hello:

Trying to get running BT in Monterey with a Asus BT-400 (Also tested Tp-Link UB400 and a CSR device). No one worked. I've a SMBIOS MacPro6,1 (tested iMacPro1,1 and MacPro7,1). Before I got a different error message from booting but now I'm getting:

2022-08-07 13:56:47.803403+0200 0x828 Error 0x0 473 0 BlueTool: [com.apple.bluetooth:BlueTool] Could not find btaddress param

My USB port is mapped to internal, BrcmPatch3 loads good. Any advice?

Thank you

 

[UtterDisbelief]

Hello:

Trying to get running BT in Monterey with a Asus BT-400 (Also tested Tp-Link UB400 and a CSR device). No one worked. I've a SMBIOS MacPro6,1 (tested iMacPro1,1 and MacPro7,1). Before I got a different error message from booting but now I'm getting:

2022-08-07 13:56:47.803403+0200 0x828 Error 0x0 473 0 BlueTool: [com.apple.bluetooth:BlueTool] Could not find btaddress param

My USB port is mapped to internal, BrcmPatch3 loads good. Any advice?

Thank you

Hi there.

This is a bit confusing - because the CSR and TP-Link adapters also do not work.

That makes the problem sound very much like USB, despite you saying you have mapped the port.

Are you using a USB2 port?

 

[pelayo]

Hi there.

This is a bit confusing - because the CSR and TP-Link adapters also do not work.

That makes the problem sound very much like USB, despite you saying you have mapped the port.

Are you using a USB2 port?

Yes. It’s on a usb2 port. Type 255. It appears as HSS anyway, but in the mobo manual figures as a 2.0

 

[pelayo]

Solved,misconfiguration on config.list used ocvalidate and detected it. Doesn't loaded BlueToolFixup.kext in the right way. Now using BT400 from Asus, perfect.

 

[Junaid6305]

Solved,misconfiguration on config.list used ocvalidate and detected it. Doesn't loaded BlueToolFixup.kext in the right way. Now using BT400 from Asus, perfect.

What do you mean it didn't load in the right way? Having the same issue here.

 

[multiymedia]

Hello:

Trying to get running BT in Monterey with a Asus BT-400 (Also tested Tp-Link UB400 and a CSR device). No one worked. I've a SMBIOS MacPro6,1 (tested iMacPro1,1 and MacPro7,1). Before I got a different error message from booting but now I'm getting:

2022-08-07 13:56:47.803403+0200 0x828 Error 0x0 473 0 BlueTool: [com.apple.bluetooth:BlueTool] Could not find btaddress param

My USB port is mapped to internal, BrcmPatch3 loads good. Any advice?

Thank you

can you share how do you make function bt-400 on meterey 12.6.x . if you can share your settings please. thanks