- Joined
- Jun 5, 2013
- Messages
- 156
- Motherboard
- NUC8I5BEK2
- CPU
- i5-8259U
- Graphics
- Iris Plus 655
- Mac
- Classic Mac
- Mobile Phone
BlackHack13's Skylake Build
ASUS Maximus VIII Formula - i7 6700K - SLI GTX 1080 Ti
ComponentsASUS Maximus VIII Formula - i7 6700K - SLI GTX 1080 Ti
Asus Rog MAXIMUS VIII FORMULA DDR4 ATX Motherboard
http://www.amazon.com/dp/B019U0VWKW/?tag=tonymacx86com-20
Intel Core i7 6700K Skylake Processor
http://www.amazon.com/dp/B012M8LXQW/?tag=tonymacx86com-20
Corsair Hydro Series H110i GTX Cooling
http://www.amazon.com/dp/B010NS1LVA/?tag=tonymacx86com-20
SLI GTX 1080 TI EVGA Founder Edition
https://www.amazon.com/dp/B06XH2P8DD/?tag=tonymacx86com-20
Phanteks Enthoo Evolv ATX Computer Case - Tempered Glass Edition, Galaxy Silver
http://www.amazon.com/dp/B01F0KVP2Q/?tag=tonymacx86com-20
BeQuiet Dark Power Pro 11 Platinum 850W
https://www.amazon.com/dp/B00X7VF6DU/?tag=tonymacx86com-20
Corsair Vengeance LPX 8GB (4 x 8GB) DDR4 DRAM 2400MHz C14 Memory Black x4 32GB
http://www.amazon.com/dp/B00UVN2C8O/?tag=tonymacx86com-20
Samsung 850 EVO 1 TB 2.5-Inch SATA III Internal SSD
http://www.amazon.com/dp/B00OBRFFAS/?tag=tonymacx86com-20
Samsung 950 PRO Series - 256GB PCIe NVMe - M.2 Internal SSD
http://www.amazon.com/dp/B015SOI392/?tag=tonymacx86com-20
ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS Combo Card
https://www.amazon.co.uk/gp/product/B00MBP25UK/?tag=tonymacx86-21
Peripherals
Asus PG348Q G-Sync
https://www.amazon.com/dp/B01C83BE6U/?tag=tonymacx86com-20
Apple Magic Trackpad 2
http://www.amazon.com/dp/B016QO5YWC/?tag=tonymacx86com-20
Apple Magic Keyboard
http://www.amazon.com/dp/B016QO64FI/?tag=tonymacx86com-20
Razer Mamba 2016
http://www.amazon.com/dp/B016XLGIDC/?tag=tonymacx86com-20
Xbox One White Controler
https://www.amazon.com/dp/B01GW3H3U8/?tag=tonymacx86com-20
Mouse pad corsair MM200 Extended
https://www.amazon.com/dp/B0149QBQE4/?tag=tonymacx86com-20
Logitech HD 920 Webcam 1080P
https://www.amazon.com/dp/B006JH8T3S/?tag=tonymacx86com-20
Comments
I decided to go with a new Skylake build since my Haswell rig was sold to my friend. I had in mind a silent beast - a Skyalake & Pascal Rig for gaming which would be the only task for Windows while other daily tasks will be on the Hackintosh. Since i own a MacBook Air and a few iDevices, I really like Apple ecosystem, and I decided to go for a fully working System "iMessage, Handoff, Facetime..." So, I bought an Original Broadcom Apple card PCI Adapter & also the new TrackPad and Magic Keyboard in pair with a good 1080p Webcam the Logitech HD920.
Multitasking is a big concern to me. I like to do my daily work such as programing with Xcode, creating videos with Final Cut Pro watching movies, music, etc. So, for that purpose, I got a Wide screen, curved Monitor - the LG 34UC88-B.
(Changed now for the Asus PG348Q with Gsync and 100hz refresh rate)
The Build
Thumb Drive UniBeast Creation
To create USB installation Drive, I used this Guide UniBeast: Install OS X El Capitan on Any Supported Intel-based PC
Note: assuming your USB key is created with UniBeast and, if your are using a NVMe SSD Drive for installation, make sure you download NVMeGeneric.kext and put it in EFI/Clover/Kexts/10.11/ folder. To do so, you need EFI Mounter V3 to make the EFI partition visible. Then, you can copy the NVMeGeneric kext. After this, just download MultiBeast - El Capitan 8.2.3 and put it in your USB Key installation. Now, you are ready to install your Hackintosh.
First Update your BIOS with the latest one available
Version (1701)
Extreme Tweeker
AI Overclocker Tuner > X.M.P.
Extreme Tweeking > Enable
Advanced ItemsExtreme Tweeking > Enable
CPU Configuration > CPU PowerManagement Configuration > CFG lock > Disable
System Agent (SA) Configuration > VT-d > Disable
System Agent (SA) Configuration >Graphics Configuration > DVMT Pre-Allocated > 64M
PCH Configuration > IOAPIC 24-119 > Enable
USB Configuration > Legacy USB Support > Auto
USB Configuration > XHCI Hand Off > Enabled
APM Configuration > Power on by PCI - E/PCI > Disabled
Onboard Devices Configuration > Wi-Fi Controller > Disable
Onboard Devices Configuration > Bluetooth Controller > Disable
Boot MenuSystem Agent (SA) Configuration > VT-d > Disable
System Agent (SA) Configuration >Graphics Configuration > DVMT Pre-Allocated > 64M
PCH Configuration > IOAPIC 24-119 > Enable
USB Configuration > Legacy USB Support > Auto
USB Configuration > XHCI Hand Off > Enabled
APM Configuration > Power on by PCI - E/PCI > Disabled
Onboard Devices Configuration > Wi-Fi Controller > Disable
Onboard Devices Configuration > Bluetooth Controller > Disable
CSM > Disable (if no OS or UEFI GPT Windows)
Fast Boot > Disabled
Secure Boot > OS Type > Other OS
Boot Option 1 > Your UniBeast USB key
Fast Boot > Disabled
Secure Boot > OS Type > Other OS
Boot Option 1 > Your UniBeast USB key
Exit > Save Changes
Installation
Power on your PC insert your MAC OS X USB Drive and launch the installation. No additional Bootflags needed to reach the installation screen. When you get to the installation screen, format your SSD in GUID partition. Then you can launch the installation process. It will take a few minutes with an NVMe SSD. At the end, your PC will reboot. Now, you can grab your MultiBeast and drag it to your Hackintosh desktop.
Post-Installation
In this part, we will need MultiBeast. In fact this awesome all-in-one little tool is going to help us a lot to get most of things working. We will only need to do some adjustments in the config.plist file to get everything working properly such as iMessage, Facetime, HandOff , NVMe wtih PikerAlpha Patch ... to do so you will have to DOWNLOAD this utility its called Clover Configurator.
First, make sure your MultiBeast Settings look like this at the build tab
We want to open Clover Configurator App and mount the EFI partition. To do so click on Mount EFI on the left of the window. Then, click on Check Partition, locate the Main System Drive and search for the Identifier of the EFI Partition - it will look like "disk1s1", depending on your configuration.
After that, go back to Clover Configurator, tap CMD+O key and select EFI/EFI/Clover/config.plist. Under the Boot section, remove the tick box for dart=0 then go to SMBIOS section you will see the iMAC SMBIOS you installed earlier there will be some blank cases but we are only interested about 2 the SmUUID & Board Serial Number.
Open terminal and tap "uuidgen" repeat serval times to get a non-used key then copy and paste it on the SmUUID once its done locate serial number and copy paste it to the Board Serial number case and add to it 5 alphanumeric key exemple "XXXXXXXXXXXX37JF0", Exit save and reboot.
Now you should have a fully working Hackintosh with Onboard and Hdmi Audio, Wifi & BT OOB even in Bios, QC/CE, iMessage, Facetime and all the features on a real MAC.
If HDMI audio is not working download the Clover HDMI Patch here View Raw Mount EFI partition if its not already mounted launch the script answer yes wait until finish then reboot.
For those who want to have SSDT for CpuPowerManagement you can download the last Piker Alpha script at this link, installations instructions is detailed too https://github.com/Piker-Alpha/ssdtPRGen.sh
Once its done copy paste it to EFI/EFI/Clover/ACPI/Patched/ and you are done.
Conclusion
This Hackintosh is amazing definitely the best one i ever built, its working even better then i expected everything is available every features such as a real mac i am very pleased with this built especialy after Nvidia release their webdriver with pascal support.
All Working Great
- GTX 1080 Ti & On-Board HD 530 graphics With QC/CE
- Onboard Audio through the Green back panel port
- HDMI AUDIO + DP With key control using "VolumeMixer App"
- Ethernet
- Wifi & BT OOB
- iMessages, Facetime ...
- Trackpad & Magic keyboard via BT on Mac, Windows & Bios
- NVMe as boot Disk fully working without NVMeGeneric.kext
Edit : Seem a lot faster on Sierra than elCapitan on Single core and a little less on multicore
Last edited: