Black screen when booting with Clover

[SherwinCorp]

The default is Buri.

Also I found the link I was linked to:


https://github.com/Conti/Chameleon/blob/master/i386/libsaio/ati.c#L1

Just Ctrl-F or Cmd-F for 7770

 

[Jithin.C.V]

The default is Buri.

Also I found the link I was linked to:


https://github.com/Conti/Chameleon/blob/master/i386/libsaio/ati.c#L1

Just Ctrl-F or Cmd-F for 7770

What are the types of ports available on your GFX card and how many are each of them??

 

[SherwinCorp]

HDMI, 2 DVI, VGA. I'm using HDMI

 

[Jithin.C.V]

HDMI, 2 DVI, VGA. I'm using HDMI

I am failing to find the right one for this port configuration

-------------------------ATI7000Controller.kext-------------------------

Aji (4) @ 0xa1c60
DP, DP, DDVI, HDMI

Buri (4) @ 0xa1ca0
LVDS, DP, DP, HDMI

Chutoro (5) @ 0xa1ce0
LVDS, DP, DP, DP, DP

Dashimaki (4) @ 0xa1d30
DP, DP, DDVI, HDMI

Ebi (5) @ 0xa1d70
LVDS, DP, DP, DP, DP

Gari (5) @ 0xa1dc0
LVDS, DP, DP, DP, DP

Futomaki (4) @ 0xa1e10
DP, DP, DDVI, HDMI

Hamachi (4) @ 0xa1e50
DP, DP, DDVI, HDMI

OPM (6) @ 0xa1e90
DP, DP, DP, DP, DP, DP

Ikura (1) @ 0xa1ef0
HDMI

IkuraS (6) @ 0xa1f00
DP, DP, DP, DP, DP, DP

Junsai (6) @ 0xa1f60
DP, DP, DP, DP, DP, DP

Kani (1) @ 0xa1fc0
HDMI

KaniS (6) @ 0xa1fd0
DP, DP, DP, DP, DP, DP

DashimakiS (4) @ 0xa2030
DP, DP, DDVI, HDMI

Maguro (1) @ 0xa2070
HDMI

MaguroS (6) @ 0xa2080
DP, DP, DP, DP, DP, DP

So you try booting with one by one from the below list.

Aji
Buri
Chutoro
Dashimaki
Ebi
Gari
Futomaki
Hamachi
OPM
Ikura
IkuraS
Junsai
Kani
KaniS
DashimakiS
Maguro
MaguroS

 

[SherwinCorp]

Should I move my kext(Or only FakeSMC cause that's the only kext) into System/Library/Extensions?

 

[SherwinCorp]

I am failing to find the right one for this port configuration

-------------------------ATI7000Controller.kext-------------------------

Aji (4) @ 0xa1c60
DP, DP, DDVI, HDMI

Buri (4) @ 0xa1ca0
LVDS, DP, DP, HDMI

Chutoro (5) @ 0xa1ce0
LVDS, DP, DP, DP, DP

Dashimaki (4) @ 0xa1d30
DP, DP, DDVI, HDMI

Ebi (5) @ 0xa1d70
LVDS, DP, DP, DP, DP

Gari (5) @ 0xa1dc0
LVDS, DP, DP, DP, DP

Futomaki (4) @ 0xa1e10
DP, DP, DDVI, HDMI

Hamachi (4) @ 0xa1e50
DP, DP, DDVI, HDMI

OPM (6) @ 0xa1e90
DP, DP, DP, DP, DP, DP

Ikura (1) @ 0xa1ef0
HDMI

IkuraS (6) @ 0xa1f00
DP, DP, DP, DP, DP, DP

Junsai (6) @ 0xa1f60
DP, DP, DP, DP, DP, DP

Kani (1) @ 0xa1fc0
HDMI

KaniS (6) @ 0xa1fd0
DP, DP, DP, DP, DP, DP

DashimakiS (4) @ 0xa2030
DP, DP, DDVI, HDMI

Maguro (1) @ 0xa2070
HDMI

MaguroS (6) @ 0xa2080
DP, DP, DP, DP, DP, DP

So you try booting with one by one from the below list.

Aji
Buri
Chutoro
Dashimaki
Ebi
Gari
Futomaki
Hamachi
OPM
Ikura
IkuraS
Junsai
Kani
KaniS
DashimakiS
Maguro
MaguroS

I just realized I named my ports wrong. I have one DVI one HDMI and 2 of these small boxes not sure what they are called

 

[Jithin.C.V]

Should I move my kext(Or only FakeSMC cause that's the only kext) into System/Library/Extensions?

It is better to install all the kext to /S/L/E.

Do not simply copy to /S/L/E, use utility like Kext Wizard,etc for installation of kext. Once it is installed remove the kext from EFI partition.

I just realized I named my ports wrong. I have one DVI one HDMI and 2 of these small boxes not sure what they are called

That may be DP (Display Ports).

You can try with,
Aji
Dashimaki
Futomaki
Hamachi
DashimakiS