- Joined
- Oct 16, 2018
- Messages
- 14
- Motherboard
- ASUS ROG STRIX Z370-G GAMING
- CPU
- i7-8700K
- Graphics
- AMD Radeon RX 480 8GB
- Mac
Hello,
it is my 1. Hackintosh build and followed: https://www.tonymacx86.com/threads/...wi-fi-ac-build-w-i7-8700k-amd-vega-56.239969/
- Differences are MB is without Wifi AC, use of 2 x 16 Hyper X Fury 3466Mhz, Samsung 970evo 500gb
- Intel HD 630 only
- No additional cards or adapters
- Display BL2711U
- DP cable packed with the display
- macOS Mojave
- used Unibeast, Clover Configurator (to load iMac 18.1 profile), Multibeast
When I plug HDMI everything works fine except I did not get HiDPI resulutions but it is not a problem now.
I would like to use Displayport to get a HiDPI resolution on 60Hz but I can not because getting black screen during boot:
- When Power Off I plug DP cable in DP port on MB on boot
- Bios screen present
- Clover screen present
- Select boot to Mojave and Apple logo present
- When the boot gauge gets into 1/2 display switch to Black screen and shows "No signal" label.
- After I plug HDMI and switch from DP to HDMI I will see macOS Logon screen and I can log in.
- When I unplug or plug DP cable it causes Computer reset when maOS is booted.
- When I switch between DP 1.1 & 1.2 in display settings in causes Computer reset when maOS is booted.
I tested many setting variants in BIOS and Clover/config.plist but nothing helped. I followed every solution I found on web. No success yet.
Please help & feel free to ask for any additional info.
Thanks!
it is my 1. Hackintosh build and followed: https://www.tonymacx86.com/threads/...wi-fi-ac-build-w-i7-8700k-amd-vega-56.239969/
- Differences are MB is without Wifi AC, use of 2 x 16 Hyper X Fury 3466Mhz, Samsung 970evo 500gb
- Intel HD 630 only
- No additional cards or adapters
- Display BL2711U
- DP cable packed with the display
- macOS Mojave
- used Unibeast, Clover Configurator (to load iMac 18.1 profile), Multibeast
When I plug HDMI everything works fine except I did not get HiDPI resulutions but it is not a problem now.
I would like to use Displayport to get a HiDPI resolution on 60Hz but I can not because getting black screen during boot:
- When Power Off I plug DP cable in DP port on MB on boot
- Bios screen present
- Clover screen present
- Select boot to Mojave and Apple logo present
- When the boot gauge gets into 1/2 display switch to Black screen and shows "No signal" label.
- After I plug HDMI and switch from DP to HDMI I will see macOS Logon screen and I can log in.
- When I unplug or plug DP cable it causes Computer reset when maOS is booted.
- When I switch between DP 1.1 & 1.2 in display settings in causes Computer reset when maOS is booted.
I tested many setting variants in BIOS and Clover/config.plist but nothing helped. I followed every solution I found on web. No success yet.
Please help & feel free to ask for any additional info.
Thanks!