Contribute
Register

(Black screen)(OC)Aorus Z390 Ultra Rev 1.0 (bios F9) / i5-9600K /NVMe Samsung 970 Pro / NO GPU intel HD630

Status
Not open for further replies.
Joined
May 28, 2012
Messages
27
Motherboard
Gygabyte AORUS ULTRA
CPU
i5-9600K
Graphics
GTX 680
Mobile Phone
  1. Android
  2. iOS
HELLO Everybody,


I am trying to install big SUR macOS 11 from scratch on my pc. here is my config :

Processor : CoffeeLake core I5 9600K
MotherBoard : Z390 AORUS ULTRA REV.1 BIOS F9
SSD NVMe : Samsung 970 pro
GPU : No Gpu intelboard HD360

bios F9 config :

Disable
  • Fast Boot
  • Secure Boot
  • Serial/COM Port
  • Parallel Port
  • VT-d (can be enabled if you set DisableIoMapper to YES)
  • CSM
  • Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
  • Intel SGX
  • Intel Platform Trust
  • CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)
Enable
  • VT-x
  • Above 4G decoding
  • Hyper-Threading
  • Execute Disable Bit
  • EHCI/XHCI Hand-off
  • OS type: Windows 8.1/10 UEFI Mode
  • DVMT Pre-Allocated(iGPU Memory): 64MB
  • SATA Mode: AHCI

I just created Big Sur Boot key with Opencore by following the procedure.ACPI COFFEE LAKE
I plug in my key and turn on the pc, I boot well on Opencore.
I then select the Big Sur install. It loads and after I have a black screen.
Can you help me please?
Is there a problem in my EFI ? i attach my EFI in post.
Is there a solution for Big Sur on ma Config with Clover (5129) ?
 

Attachments

  • EFI.zip
    24.7 MB · Views: 47
Status
Not open for further replies.
Back
Top