Contribute
Register

Black Screen After Apple Logo Loading Screen

Status
Not open for further replies.
brianwong11031

brianwong11031

Joined
Jul 3, 2018
Messages
306
Motherboard
Asus P8H61-M LX
CPU
i5-2500K
Graphics
HD 3000 (Disabled) + RX470
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
Hello,
after it rebooted to install 10.15.1, when it finished loading, it turned into black screen.
I have tried to use the latest version of clover boot loader, but still not working.
 
I ran into this issue as well upgrading to Catalina 10.15.1. If you have processor with integrated graphics, try entering the BIOS and changing the setting to display output using the integrated graphics only. That’s what I did. Then connect your monitor to your mother board. Then boot up the computer. If all goes well, you should see your desktop. From that point you can configure any setting changes.
All I did was upgrade WhateverGreen.kext to its latest version, 1.3.4 I believe. I found the latest version of the kext from another member on this site. After the kext is upgraded, you can clear your kextcache and reboot. (hackintool made refreshing the kext cache easy). Before rebooting, enter the BIOS and restore whichever setting you had previously.

Good luck.
 
myHack Pro
SABERTOOTH Z97 MARK 2 |  i7 4790K |  Vega 64 8GB
RichardSwimmer said:
how can I update my WEG from windows?? I'm stuck! Please help me
Click to expand...
You can save the kext in your flash drive and copy it into Library/Extensions/ with Terminal in Recovery Mode
 
it will be much easier if you just put all those extensions under EFI/Clover or EFI/OC,

then you don't need to enter mac to update thoese extensions, any bootable os can be used to update.
 
My Home Hackintosh
Z390 AORUS MASTER |  i9 9900K |  Vega 64 8GB
Same problem here, I have updated to WEG 1.3.4 and AppleALC 1.4.3, rebuilt the kext cache and even after that it won't work.

Here it is the last boot log:

Code: 
0:100  0:100  MemLog inited, TSC freq: 4200567000
0:100  0:000  CPU was calibrated with RTC
0:100  0:000 
0:100  0:000  Now is 31.10.2019,  17:52:40 (GMT)
0:100  0:000  Starting Clover revision: 5098 (master, commit 58649391) on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/Clover/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,83A7335C-4785-4458-823B-0CF14B144CC9,0x28,0x64000) @BE829E98
0:100  0:000  SelfDirPath = \EFI\CLOVER
0:103  0:002  SimpleTextEx Status=Success
0:103  0:000  === [ Get Smbios ] ========================================
0:103  0:000  Type 16 Index = 0
0:103  0:000  Total Memory Slots Count = 4
0:103  0:000  Type 17 Index = 0
0:103  0:000  Ignoring insane frequency value 0MHz
0:103  0:000  SmbiosTable.Type17->Speed = 0MHz
0:103  0:000  SmbiosTable.Type17->Size = 0MB
0:103  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 DIMM_A1
0:103  0:000  SmbiosTable.Type17->Vendor = <null string>
0:103  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:103  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:103  0:000  Type 17 Index = 1
0:103  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:103  0:000  SmbiosTable.Type17->Size = 8192MB
0:103  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 DIMM_A2
0:103  0:000  SmbiosTable.Type17->Vendor = Corsair
0:103  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:103  0:000  SmbiosTable.Type17->PartNumber = CMK16GX4M2B3200C16 
0:103  0:000  Type 17 Index = 2
0:103  0:000  Ignoring insane frequency value 0MHz
0:103  0:000  SmbiosTable.Type17->Speed = 0MHz
0:103  0:000  SmbiosTable.Type17->Size = 0MB
0:103  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 DIMM_B1
0:103  0:000  SmbiosTable.Type17->Vendor = <null string>
0:103  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:103  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:103  0:000  Type 17 Index = 3
0:103  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:103  0:000  SmbiosTable.Type17->Size = 8192MB
0:103  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 DIMM_B2
0:103  0:000  SmbiosTable.Type17->Vendor = Corsair
0:103  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:103  0:000  SmbiosTable.Type17->PartNumber = CMK16GX4M2B3200C16 
0:103  0:000  Boot status=0
0:103  0:000  Running on: 'System Product Name' with board 'B150M-A_M.2'
0:103  0:000  === [ GetCPUProperties ] ==================================
0:103  0:000  CPU Vendor = 756E6547 Model=906E9
0:103  0:000   The CPU supported SSE4.1
0:103  0:000  BrandString = Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz
0:103  0:000   The CPU supported turbo
0:103  0:000  MSR 0x35               40008
0:103  0:000   TSC/CCC Information Leaf:
0:103  0:000    numerator     : 350
0:103  0:000    denominator   : 2
0:103  0:000   Calibrated ARTFrequency: 24003240
0:103  0:000   Rounded ARTFrequency: 24000000
0:103  0:000  MSR 0xE2 before patch 1E000000
0:103  0:000  MSR 0xCE              00080838_F1012A00
0:103  0:000  corrected FLEX_RATIO = E0000
0:103  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:103  0:000  MaxDiv/MinDiv: 42.0/8
0:103  0:000  Turbo: 44/44/44/45
0:103  0:000  Features: 0xBFEBFBFF
0:103  0:000  Threads: 8
0:103  0:000  Cores: 4
0:103  0:000  FSB: 100 MHz
0:103  0:000  CPU: 4200 MHz
0:103  0:000  TSC: 4200 MHz
0:103  0:000  PIS: 100 MHz
0:103  0:000  ExternalClock: 25 MHz
0:103  0:000  === [ GetDevices ] ========================================
0:103  0:000  GOP found at: PciRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80012321)
0:103  0:000  PCI (00|00:00.00) : 8086 591F class=060000
0:103  0:000  PCI (00|00:02.00) : 8086 5912 class=030000
0:103  0:000   - GOP: Provided by device
0:103  0:000   - GFX: Model=Intel HD Graphics 630 (Intel)
0:103  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:103  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:103  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:103  0:000  PCI (00|00:1C.00) : 8086 A114 class=060400
0:103  0:000  PCI (00|01:00.00) : 10EC 8168 class=020000
0:103  0:000   - LAN: 0 Vendor=Realtek
0:103  0:000  PCI (00|00:1C.07) : 8086 A117 class=060400
0:103  0:000  PCI (00|02:00.00) : 14E4 43A0 class=028000
0:103  0:000   - WIFI: Vendor=Broadcom
0:103  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:103  0:000  PCI (00|00:1F.00) : 8086 A148 class=060100
0:103  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:103  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:103  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:103  0:000  === [ GetDefaultSettings ] ================================
0:103  0:000  Clover load options size = 40 bytes
0:103  0:000  Clover started with option to boot boot.efi from Preboot
0:111  0:007  EFI\CLOVER\config.plist loaded: Success
0:111  0:000  === [ GetListOfThemes ] ===================================
0:112  0:001  - [00]: tonymacx86
0:117  0:005  - [01]: random
0:121  0:004  - [01]: embedded
0:126  0:004  === [ Found config plists ] ===============================
0:127  0:001  - config.plist
0:128  0:000  === [ GetEarlyUserSettings ] ==============================
0:128  0:000  timeout set to 3
0:128  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:147  0:018  Default theme: random
0:160  0:013  Hiding entries with string Windows
0:174  0:013  Hiding entries with string BOOTX64.EFI
0:189  0:015  === [ LoadDrivers ] =======================================
0:738  0:549  Loading FSInject.efi  status=Success
0:786  0:047  Loading NvmExpressDxe.efi  status=Success
0:835  0:049   - driver needs connecting
0:848  0:012  Loading SMCHelper.efi  status=Success
0:892  0:044  Loading VBoxHfs.efi  status=Success
0:937  0:044   - driver needs connecting
0:949  0:012  Loading DataHubDxe.efi  status=Success
0:995  0:045  Loading PartitionDxe.efi  status=Success
1:040  0:044   - driver needs connecting
1:053  0:012  Loading ApfsDriverLoader.efi  status=Success
1:196  0:143   - driver needs connecting
1:209  0:013  Loading AudioDxe.efi  status=Success
1:258  0:048   - driver needs connecting
1:271  0:013  Loading AptioMemoryFix.efi  status=Success
1:417  0:145  Loading CsmVideoDxe.efi  status=Success
1:474  0:056   - driver needs connecting
1:485  0:011  6 drivers needs connecting ...
1:496  0:011  PlatformDriverOverrideProtocol not found. Installing ... Success
1:532  0:036  Partition driver loaded: CD disconnect Success
1:564  0:032  APFS driver loaded
1:575  0:010  Video driver loaded: disconnect Success
1:995  0:419  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
7:772  5:777  === [ InitScreen ] ========================================
8:251  0:478  Console modes reported: 4, available modes:
8:262  0:011   - [01]: 80x25 (current mode)
8:273  0:010   - [02]: 80x50
8:283  0:010   - [03]: 100x31
8:294  0:010   - [04]: 480x113
8:305  0:010  SetScreenResolution: 1920x1080 - not found!
8:327  0:022  reinit: self device path=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,83A7335C-4785-4458-823B-0CF14B144CC9,0x28,0x64000)
8:344  0:016  Using embedded font: Success
8:355  0:011  === [ GetMacAddress ] =====================================
8:779  0:423  === [ ScanSPD ] ===========================================
9:274  0:495  Scanning SMBus [8086:A123], mmio: 0xF742A004, ioport: 0xF040, hostc: 0x11
9:304  0:030  Slot: 1 Type 26 8192MB 2132MHz Vendor=Corsair PartNo=CMK16GX4M2B3200C16 SerialNo=0000000000000000
9:334  0:029  Slot: 3 Type 26 8192MB 2132MHz Vendor=Corsair PartNo=CMK16GX4M2B3200C16 SerialNo=0000000000000000
9:351  0:017  === [ GetAcpiTablesList ] =================================
9:745  0:393  Get Acpi Tables List from RSDT:
9:767  0:022   - [00]: FACP  A M I  len=132
9:778  0:010   - [01]: APIC  A M I  len=188
9:789  0:011   - [02]: FPDT  A M I  len=68
9:800  0:010   - [03]: ASF!   HCG len=160
9:811  0:010   - [04]: MCFG  A M I  len=60
9:822  0:011   - [05]: SSDT  SataTabl len=912
9:833  0:011   - [06]: FIDT  A M I len=156
9:844  0:010   - [07]: SSDT  SaSsdt  len=12353
9:855  0:011   - [08]: SSDT  PegSsdt len=9540
9:869  0:013   - [09]: HPET  KBL len=56
9:879  0:010   - [10]: SSDT  Ther_Rvp len=3643
9:891  0:011   - [11]: SSDT  xh_rvp08 len=2845
9:901  0:010   - [12]: UEFI  EDK2     len=66
9:912  0:010   - [13]: SSDT  CpuSsdt len=3806
9:923  0:010   - [14]: LPIT  KBL len=148
9:934  0:011   - [15]: WSMT  KBL len=40
9:945  0:011   - [16]: SSDT  sensrhub len=671
9:956  0:010   - [17]: SSDT  PtidDevc len=12290
9:967  0:011   - [18]: DBGP   len=52
9:978  0:010   - [19]: DBG2   len=84
9:992  0:013   - [20]: BGRT  A M I  len=56
10:002  0:010   - [21]: DMAR  KBL  len=168
10:013  0:010  Calibrated TSC Frequency = 4200567000 = 4200MHz
10:024  0:011  === [ GetUserSettings ] ===================================
10:426  0:402  USB FixOwnership: yes
10:437  0:010  Dropping 1 tables:
10:448  0:010   - [00]: Drop table  signature="MATS" (5354414D)
10:535  0:087           - set table: 5354414D,                0 to drop: no
10:557  0:021   - final DSDT Fix mask=00000000
10:568  0:010  Using ProductName from config: iMac14,2
10:581  0:013  Using latest BiosVersion from clover
10:592  0:010  BiosVersion: IM142.88Z.F000.B00.1907241133
10:603  0:010  BiosReleaseDate: 07/24/2019
10:614  0:010  Using EfiVersion from clover: 140.0.0.0.0
10:624  0:010  Using FirmwareFeatures from clover: 0xE00FE137
10:635  0:010  Using FirmwareFeaturesMask from clover: 0xFF1FFF3F
10:646  0:010  Using PlatformFeature from clover: 0x1
10:657  0:010  QPI: 100MHz
10:671  0:014  === [ Found DSDT tables ] =================================
11:298  0:626  === [ ScanVolumes ] =======================================
11:746  0:448  Found 17 volumes with blockIO
11:757  0:010  - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)
11:780  0:022  - [01]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
11:801  0:021          Found optical drive
11:812  0:010  - [02]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)
11:835  0:022  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)
11:860  0:025  - [04]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,D4AA6404-CFDA-48B6-A36A-E69E54037670,0x28,0x64000)
11:883  0:022          Result of bootcode detection: bootable unknown (legacy)
11:896  0:012  - [05]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,501B6FB0-2A87-4D22-8A47-235B419A023A,0x64028,0xE8D64860)
11:921  0:025          Result of bootcode detection: bootable unknown (legacy)
11:932  0:011  - [06]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,7F2FBDA9-EF79-4B18-817C-36C543CA084A,0xE8DC8888,0x40000)
11:957  0:024  - [07]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,6DA2E497-FBEA-4B7D-8F23-53565BAE9FF7,0x28,0x64000)
11:979  0:022          Result of bootcode detection: bootable unknown (legacy)
11:992  0:012  - [08]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,690E7469-7E8A-49CA-8A36-2D4D2257DD52,0x64028,0x74662D60)
12:014  0:022  - [09]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,2D0D4795-6FD5-406A-8ED4-E849A5C1F202,0x746C6D88,0x40000)
12:039  0:025  - [10]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,83A7335C-4785-4458-823B-0CF14B144CC9,0x28,0x64000)
12:062  0:022          Result of bootcode detection: bootable unknown (legacy)
12:075  0:012          This is SelfVolume !!
12:086  0:010  - [11]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,CC0B3D86-735D-47D8-AC16-E9958BD8EB8E,0x64028,0x1D161920)
12:107  0:021          Result of bootcode detection: bootable unknown (legacy)
12:121  0:013  - [12]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,CC0B3D86-735D-47D8-AC16-E9958BD8EB8E,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D58BF586F72F53479CC36CF5F6E210E6)
12:143  0:021  - [13]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,CC0B3D86-735D-47D8-AC16-E9958BD8EB8E,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,F5B99830A873F8338E96EC3DAE2D3A35)
12:168  0:025  - [14]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,CC0B3D86-735D-47D8-AC16-E9958BD8EB8E,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,B7EB7D89EABCB342AF32771DF907CFF4)
12:189  0:021  - [15]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,CC0B3D86-735D-47D8-AC16-E9958BD8EB8E,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,226F65A0744DFD4F8BA66D430CC91C23)
12:211  0:021  - [16]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,CC0B3D86-735D-47D8-AC16-E9958BD8EB8E,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,2CF70A40D47DE7458864C200CB16AECA)
12:236  0:024  found 2 handles with audio
12:248  0:011  No AudioIoDevice stored
12:259  0:010  no stored audio parameters
12:270  0:010  === [ InitTheme ] =========================================
12:777  0:506  use daylight theme
12:795  0:018  Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
12:807  0:011  file sound read: sound.wav Not Found
12:821  0:014  Loading font from ThemeDir: Error
12:833  0:012  theme inited
12:844  0:010  Chosen theme random
12:856  0:011  after NVRAM boot-args=-disablegfxfirmware -v
12:867  0:011  === [ Dump SMC keys from NVRAM ] ==========================
13:172  0:304  found AppleSMC protocol
13:276  0:104  Registered 16 SMC keys
13:292  0:015  === [ ScanLoader ] ========================================
13:756  0:464  - [04]: 'EFI'
13:912  0:156  - [06]: 'Boot OS X'
14:035  0:122  - [07]: 'EFI'
14:190  0:154  - [08]: 'Storage 3TB'
14:323  0:133  - [09]: 'Boot OS X'
14:447  0:123  - [10]: 'EFI'
14:602  0:155          AddLoaderEntry for Volume Name=EFI
14:615  0:012          skipped because entry is hidden
14:629  0:014  - [12]: 'Preboot'
14:653  0:024          AddLoaderEntry for Volume Name=Preboot
14:666  0:013      Check if volume Is Hibernated:
14:680  0:013      Check sleep image 'by signature':
14:695  0:015      using default sleep image name = \private\var\vm\sleepimage
14:710  0:015      sleepimage not found -> Not Found
14:721  0:010      hibernated: no - sign
14:844  0:122  - [13]: 'Samsung SSD 850 EVO 250G Media - Data'
14:972  0:128  - [14]: 'Recovery'
14:998  0:025          AddLoaderEntry for Volume Name=Recovery
15:122  0:124  - [15]: 'VM'
15:244  0:122  - [16]: 'Samsung SSD 850 EVO 250G Media'
15:288  0:044          AddLoaderEntry for Volume Name=Samsung SSD 850 EVO 250G Media
15:306  0:017      Check if volume Is Hibernated:
15:317  0:011      Check sleep image 'by signature':
15:335  0:018      using default sleep image name = \private\var\vm\sleepimage
15:348  0:012      sleepimage not found -> Not Found
15:359  0:011      hibernated: no - sign
15:478  0:118  Scanning legacy ...
15:489  0:010  === [ AddCustomTool ] =====================================
15:932  0:443  found tool \EFI\CLOVER\tools\Shell64U.efi
15:943  0:010  Checking EFI partition Volume 4 for Clover
15:957  0:014  Checking EFI partition Volume 7 for Clover
15:969  0:012  Checking EFI partition Volume 10 for Clover
15:987  0:017   Found Clover
16:013  0:026  === [ GetEfiBootDeviceFromNvram ] =========================
16:313  0:299   - found entry 2. 'Boot macOS from Samsung SSD 850 EVO 250G Media', Volume 'Samsung SSD 850 EVO 250G Media', DevicePath 'PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,CC0B3D86-735D-47D8-AC16-E9958BD8EB8E,0x64028,0x1D161920)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,2CF70A40D47DE7458864C200CB16AECA)\System\Library\CoreServices\boot.efii'
16:328  0:014  DefaultIndex=2 and MainMenu.EntryCount=9
16:554  0:226  GUI ready
20:580  4:026  exit from MainMenu 4
20:593  0:013  === [ StartLoader ] =======================================
21:063  0:469  Finally: ExternalClock=26MHz BusSpeed=100014kHz CPUFreq=4201MHz QPI: hw.busfrequency=100000000Hz
21:085  0:022  Loading boot.efi  status=Success
21:251  0:165  GetOSVersion: 10.15.1 (19B88)
21:273  0:022  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
21:284  0:011  Will not patch boot.efi
21:298  0:013  === [ PatchSmbios ] =======================================
21:758  0:459  insert table 9 for dev 0:0
21:769  0:011  insert table 9 for dev 0:0
21:780  0:011  Table 11 present, but rewritten for us
21:792  0:011  Channels: 2
21:803  0:011  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
22:091  0:287  SMBIOS Type 17 Index = 0 => 0 0:
22:102  0:011  BANK 0 DIMM0 EMPTY
22:113  0:010  SMBIOS Type 17 Index = 1 => 2 2:
22:124  0:011  BANK 1 DIMM0 EMPTY
22:138  0:014  SMBIOS Type 17 Index = 2 => 1 1:
22:150  0:011  BANK 0 DIMM1 2400MHz 8192MB
22:161  0:011  SMBIOS Type 17 Index = 3 => 3 3:
22:172  0:010  BANK 1 DIMM1 2400MHz 8192MB
22:183  0:010  mTotalSystemMemory = 16384
22:194  0:011  NumberOfMemoryDevices = 4
22:205  0:011  Type20[0]->End = 0x7FFFFF, Type17[2] = 0x2000
22:216  0:011  Type20[1]->End = 0xFFFFFF, Type17[3] = 0x6000
22:227  0:011  Table 131 is present, CPUType=10
22:238  0:010  Change to: 705
22:249  0:011  === [ PatchACPI ] =========================================
22:743  0:493  Xsdt reallocation done
22:754  0:011  old FADT length=114
22:766  0:012   SignatureFixup: 0x127C64A4 -> 0x0
22:781  0:015  Apply DsdtFixMask=0x00000000
22:792  0:010     drop _DSM mask=0xFFFF
22:803  0:011  === [ FixBiosDsdt ] =======================================
23:258  0:454    0 replacements
23:269  0:011  PreCleanup XSDT: count=22, length=212
23:280  0:011  PreCleanup XSDT, corrected XSDT: count=22, length=212
23:292  0:011  === [ ACPIPatchedAML ] ====================================
23:717  0:425  AutoMerge pass 1
23:728  0:011  Unsorted
23:739  0:011  Inserting SSDT-XCPM.aml from EFI\CLOVER\ACPI\patched: ignore on pass 1
23:762  0:023  === [ ACPIDropTables ] ====================================
24:197  0:434    0 replacements
24:208  0:010    0 replacements
24:223  0:014  Found OperationRegion(SANV, SystemMemory, C2D39358, ...)
24:234  0:011    0 replacements
24:245  0:011    0 replacements
24:256  0:011    0 replacements
24:273  0:017    0 replacements
24:285  0:011  Found OperationRegion(PNVS, SystemMemory, B40E7000, ...)
24:296  0:011    0 replacements
24:307  0:010    0 replacements
24:318  0:011  === [ ACPIPatchedAML ] ====================================
24:739  0:420  AutoMerge pass 2
24:750  0:011  Unsorted
24:762  0:012  Inserting SSDT-XCPM.aml from EFI\CLOVER\ACPI\patched: size=187 ... Success
24:798  0:035  ApicCPUNum=1
24:808  0:010  Cleanup XSDT: count=23, length=220
24:819  0:010  corrected XSDT count=23, length=220
24:833  0:014  === [ RestSetup macOS ] ===================================
25:242  0:408  Intel GFX injection not set
25:253  0:010   RCBA disabled; cannot use it
25:264  0:011   setting specified layout-id=1 (0x1)
25:275  0:011  stringlength = 972
25:287  0:011  CurrentMode: Width=3840 Height=2160
25:297  0:010  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BCF82A58
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BCF82A58
25:329  0:031  Use origin smbios table type 1 guid.
25:365  0:036  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
25:378  0:013  Extra kext: EFI\CLOVER\kexts\Other\WhateverGreen.kext (v.1.3.4)
25:403  0:025  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.3.8)
25:423  0:019  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800)
25:445  0:022  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.4.3)
25:784  0:338  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Off
25:797  0:012  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.15
25:816  0:019  Custom boot screen not used because entry has unset use graphics
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top