- Joined
- Nov 3, 2012
- Messages
- 13
- Motherboard
- Gigabyte GA-Z77N-WIFI
- CPU
- i5-3570K
- Graphics
- Intel HD Graphics 4000
- Mobile Phone
Clover
Install the Clover
Audio
Install Luli/AppleALC, I found it works better than audio_CloverALC (popping noise)
Graphics
(GT640 + HD4000) hardware setup (in order to enable hardware acceleration VDA)
connect the display input to the GT640
BIOS setup:
Init Display First: PEG
Internal Graphics: Enabled
Internal Graphics Memory Size : 64MB
DVMT Total Memory Size : "MAX"
Clover config.plst
SMBIOS : iMac13,2
ACPI patching (use Clover Configruator) : change ECH1 to EH01, change ECH2 to EH02, change GFX0 to IGPU
Graphics : ig-platform-id = 0x01620007, InjectIntel = "YES"
run the VDADecoderChecker
resultCode:GVA info: Successfully connected to the Intel plugin, offline Gen7 Hardware acceleration is fully supported
Hi all - I`m really looking for a helping hand. My setup is an ordinary Z77N - no dedicated graphics card. My final step is getting HD4000 to work on 10.13.6.
Audio works nicely and without the aforementioned popping noises. Thanks for that tip!
I tried all available ig-platform-ids (even more than the 3 recommended by clover drop-down menu). I also followed rehabman's tip in another thread where he hints at digital connectors. No success. Lilu and fixup have been inserted manually in the EFI (other) section. And I installed it additionally via multibeast as other threads recommended doing that without doing anything else. This would get the job done... not for me.
Thank you so much for your help!
If you do not have the dedicated graphics card, you can use the "ig-platform-id" 0x01620005 for HD4000
you don't need IntelGraphicsFixup plugin
If you do not have the dedicated graphics card, you can use the "ig-platform-id" 0x01620005 for HD4000
you don't need IntelGraphicsFixup plugin
Thank you so much for your quick reply. As I am currently reinstalling everything from scratch to have a blank slate, I`m also curious about your "install Clover" entry. How precisely did you install it and which version in particular? Beforehand I was working my way through with a copy of the UniBeast installer (a simple copy of the EFI folder) and not using MultiBeast.
sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ High\ Sierra.app
ApfsDriverLoader-64.efi
AppleImageCodec-64.efi
AppleKeyAggregator-64.efi
AppleUITheme-64.efi
AptioInputFix-64.efi
AptioMemoryFix-64.efi
DataHubDxe-64.efi
FirmwareVolume-64.efi
FSInject-64.efi
SMCHelper-64.efi
VBoxHfs-64.efi
EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1723)
EFI\CLOVER\kexts\Other\Lilu.kext (v.1.2.4)
EFI\CLOVER\kexts\Other\RealtekRTL8111.kext (v.2.2.1)
EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.2.8)
I do not use UniBeast installer, you can created the bootlable USB drive by running the createinstallmedia command
How to create a bootable installer for macOS
https://support.apple.com/en-us/HT201372
for High Sierra:
Code:sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ High\ Sierra.app
clover version did I used :
r4220, r4233, r4243, r4268, r4297, r4318, r4334, r4368, r4369, r4392, r4411, r4427, r4428, r4439, r4509*, r4522, r4523', r4532', r4533, r4586*
you may use clover r4586, I haven't try the lastest one (r4617) yet
Install the Clover EFI bootloader on your USB drive
run the clover installer
select custom install : DriverUFEI options : select AptioMemoryFix-64 or OsxAptioFix3Drv (not available in r4586)
* install either AptioMemoryFix-64 or OsxAptioFix3Drv, not both of them
e.g. files in the EFI\CLOVER\kexts\drivers64UEFI folder
Code:ApfsDriverLoader-64.efi AppleImageCodec-64.efi AppleKeyAggregator-64.efi AppleUITheme-64.efi AptioInputFix-64.efi AptioMemoryFix-64.efi DataHubDxe-64.efi FirmwareVolume-64.efi FSInject-64.efi SMCHelper-64.efi VBoxHfs-64.efi
files in the EFI\CLOVER\kexts\Other folder
Code:EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1723) EFI\CLOVER\kexts\Other\Lilu.kext (v.1.2.4) EFI\CLOVER\kexts\Other\RealtekRTL8111.kext (v.2.2.1) EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.2.8)
* the default clover.plist should works
SMBIOS : Macmini6,2
ACPI patching (use clover configruator) : change ECH1 to EH01, change ECH2 to EH02, change GFX0 to IGPU
Graphics : ig-platform-id = 0x01620005, InjectIntel = "YES"
Where to look for the errors
(a) on the screen, capture the screen
(b) Press F2 in the Clover GUI, the preboot.log is saved in EFI\CLOVER\misc\ folder
what hardware in your configuration?
I opted out of APFS conversion because I edited the minstallconfig.xml. I can't tell whether this is relevant for HD4000 to work. But it might do without the ApfsDriverLoader-64.efi? You recommend using Macmini6,2. All the others are talking about iMac14,2. So I will also go for this. Keeping my fingers crossed. And thank you much again for such a detailed answer!!!
*update*
HD4000 works!!! 4000 hugs for you!!!
but... I lost sound despite the fact that AppleALC is in its place...?
*update#2*
got audio back: devices->audio turned it back on with "1"
THANK YOU SOOO MUCH FOR YOUR HELP!!!
My formulation was a little misleading. I did follow your tip of course!You recommend using Macmini6,2. All the others are talking about iMac14,2. So I will also go for this.