- Joined
- Oct 10, 2015
- Messages
- 86
- Motherboard
- Z390 Ultra Gigabyte SLI
- CPU
- i9-9900K
- Graphics
- GTX 1070
- Mac
- Classic Mac
- Mobile Phone
Juts trying with Asus Q170T board + Skylake 6500T - no dedicated GPU and M.2-Sata SSD, it used the guide, only thing all not sure is Secure boot, i selected Other OS, but secure boot is still enabled.
When im booting from installation USB in versobe mode, its freezing:
- i ends on lines with:
MissingBLuetoothController
and AppleUSBHostResources - assuming successful wake UNITs 100 sleepUnits 0
Messy photo, sorry:
https://dl.dropboxusercontent.com/u/2741044/MacMiniStaviSiSam/2017-03-26 03.08.00.jpg
In guide is use USB2 ports, but my case and board - as the back has only USB3 ones. I have some USB2 port header on board, but it would be messy solution, because i have case without additional cards brackets.. so i can simply use USB2 bracket.
Update: I have found some USB3 header to USB2, but error is still a same.
What next i have to do?
When im booting from installation USB in versobe mode, its freezing:
- i ends on lines with:
MissingBLuetoothController
and AppleUSBHostResources - assuming successful wake UNITs 100 sleepUnits 0
Messy photo, sorry:
https://dl.dropboxusercontent.com/u/2741044/MacMiniStaviSiSam/2017-03-26 03.08.00.jpg
In guide is use USB2 ports, but my case and board - as the back has only USB3 ones. I have some USB2 port header on board, but it would be messy solution, because i have case without additional cards brackets.. so i can simply use USB2 bracket.
Update: I have found some USB3 header to USB2, but error is still a same.
What next i have to do?
Last edited: