Big Sur Public Beta 2 kernel panic

[global6000]

Ok. I was wondering if I should try that. I do that now.

 

[global6000]

Ok Slide =0 did not work either. I attached latest error log which ends with:

14:104 00:004 OCABC: MMIO devirt start
14:109 00:004 OCABC: MMIO devirt 0xE0000000 (0x10000 pages, 0x800000000000100D) skip 0
14:113 00:004 OCABC: MMIO devirt 0xFE000000 (0x11 pages, 0x8000000000000001) skip 0
14:117 00:004 OCABC: MMIO devirt 0xFEC00000 (0x1 pages, 0x8000000000000001) skip 0
14:121 00:004 OCABC: MMIO devirt 0xFEE00000 (0x1 pages, 0x8000000000000001) skip 0
14:125 00:004 OCABC: MMIO devirt 0xFF000000 (0x1000 pages, 0x800000000000100D) skip 0
14:130 00:004 OCABC: MMIO devirt end, saved 278604 KB
14:134 00:004 AAPL: [EB|#LOG:EXITBS:START] 2020-08-24T04:08:12

 

[pastrychef]

Ok Slide =0 did not work either. I attached latest error log which ends with:

14:104 00:004 OCABC: MMIO devirt start
14:109 00:004 OCABC: MMIO devirt 0xE0000000 (0x10000 pages, 0x800000000000100D) skip 0
14:113 00:004 OCABC: MMIO devirt 0xFE000000 (0x11 pages, 0x8000000000000001) skip 0
14:117 00:004 OCABC: MMIO devirt 0xFEC00000 (0x1 pages, 0x8000000000000001) skip 0
14:121 00:004 OCABC: MMIO devirt 0xFEE00000 (0x1 pages, 0x8000000000000001) skip 0
14:125 00:004 OCABC: MMIO devirt 0xFF000000 (0x1000 pages, 0x800000000000100D) skip 0
14:130 00:004 OCABC: MMIO devirt end, saved 278604 KB
14:134 00:004 AAPL: [EB|#LOG:EXITBS:START] 2020-08-24T04:08:12

I don't know how to resolve this... But at least you are not getting the slide error anymore.

 

[global6000]

Thanks for trying. I guess I'll just wait for the next beta or release of Big Sur

 

[tedyun]

Have you unlocked the CFG?

I have tried reseting and cleaning NVRam to no effect. Is there anything else I can try?

 

[global6000]

Yes and also verified the CFG is still unlocked.

 

[global6000]

did you modify your Bios settings?
parallel port disabled,
Cfg unlocked, intel SGX
no secure boot. etc.
I had every kind of kernel panic until I found all the wrong bios settings

Also SIP must be disabled. in your config.plist IS enabled.

I disabled SIP, and had no of the BIOS issues you listed. Still same kernel panic

 

[Feartech]

I disabled SIP, and had no of the BIOS issues you listed. Still same kernel panic

maybe try uploading your config.plist to:

OpenCore config.plist Sanity Checker

Sanity check your OpenCore config.plist

opencore.slowgeek.com

 

[global6000]

maybe try uploading your config.plist to:

OpenCore config.plist Sanity Checker

Sanity check your OpenCore config.plist

opencore.slowgeek.com

Ok. Here is the Config. I'll put into sanity checker but it is 0.6.1 now. The output says I need one more Protocol Override. But when you look at my config there are 18 now due to it being 0.6.1. I checked my 0.6.0 version and it is all ok with sanity checker so I believe there is no issue with this one either.

ProtocolOverrides

• You should have exactly 16 settings in the UEFI/ProtocolOverrides section
• AppleAudio = No
• AppleBootPolicy = No
• AppleDebugLog = No
• AppleEvent = No
• AppleFramebufferInfo = No
• AppleImageConversion = No
• AppleKeyMap = No
• AppleRtcRam = No
• AppleSmcIo = No If you plan to use FileVault2, please enable this
• DataHub = No
• DeviceProperties = No
• FirmwareVolume = No If you plan to use FileVault2, please enable this
• HashServices = No If you plan to use FileVault2, please enable this
• OSInfo = No
• UnicodeCollation = No

 

[elskankinloco]

Have you tried the troubleshooting tips from https://dortania.github.io/OpenCore...bleshooting.html#stuck-on-eb-log-exitbs-start
the last entry on your file is 14:134 00:004 AAPL: [EB|#LOG:EXITBS:START] 2020-08-24T04:08:12

per the guide:
SetupVirtualMap set true could cause some firmware to KP. you might try setting this to false