- Joined
- Sep 22, 2011
- Messages
- 1,520
- Motherboard
- HP EliteDesk 800 G5 Mini
- CPU
- i9-9900
- Graphics
- UHD 630
- Mac
- Mobile Phone
@deeveedee Thanks for your advice The post is corrected.@NeoNero It might be worth noting for others who use your kext that you deleted the Type C USB2 port (HS10) to make room for the Bluetooth USB port (HS14). Others may choose to remove a different logical port. Nice work.
I'm happy to report that I successfully migrated from Clover to OC using EFI for 0.6.9 that you have.CLOVER Specifics
To switch from CLOVER to OC, do the following:
- I will not be posting a Clover-based solution for Big Sur. Open Core will be my only bootloader for Big Sur.
- Make a full system backup before you convert
- Open Hackintool and collect the following info (collecting this from your CLOVER config.plist is possible, too, if you can avoid the confusion of RtVariables.MLB and SMBIOS.BoardSerialNumber):
- Serial Number (this will be OC's PlatformInfo.Generic.SystemSerialNumber)
- System ID (this will be OC's PlatformInfo.Generic.SystemUUID)
- ROM (this will be OC's PlatformInfo.Generic.ROM)
- Board Serial Number (this will be OC's PlatformInfo.Generic.MLB)
- Follow this guide to remove the CLOVER stuff from your system: Converting from CLOVER to OC
- After you have completely removed the CLOVER EFI from your system, replace it with your OC EFI
- Populate your OC config.plist with the values you collected in Step 1
- Reboot (now with OC bootloader)
- Follow any prompts to allow extensions for apps that you've installed
Yeah! I have an USB-C to 4 USB-A 3.0 hub. So I removed only the logical 3.0 rear bottom USB-A, which I use with my keyboard ( which is also 2.0, so wouldn't be needing 3.0 anyway ). So it's a no compromise delete.@deeveedee Thanks for your advice The post is corrected.
I'm trying to use your USBPort.kext and now the WiFi works out of the box, but the bluetooth isn't working at all.All work's fine now Bluetooth and WiFi 6 on my Intel AX200 M.2 Card. I only activate the USB port HS14 and Edit EFI/OC/Kexts/USBPorts.kext/Contents/Info.plist.
I choose to delete the Type C USB2 port (HS10) to make room for the Bluetooth USB port (HS14).
For those that they have the same problem with Intel WIFI card, I share my USBPorts.kext to have active Bluetooth device in HP EliteDesk 800 G4 mini.