Big Airline compatible ATX cases (24" x 16" x 10" -- 609mm x 406mm x 254mm)

[macs_forever]

So far I have found 2:

• RAIJINTEK THETIS -- 14.2" x 8.3" x 14.4"
• Riotoro CR1080 -- 15.51" x 9.06" x 14.17"

The Thetis is my first choice. Any others out there I should consider? I've already built a Hackintosh in the RAIJINTEK STYX. It was a little tight but worked well. Not considering water cooling for a build that will get transported a lot. Will likely use the Noctua NH-U12S heatsink.

 

[macs_forever]

Found another but it seems to have cooling issues. Probably not hard to fix with a Dremel.

Master Box Q500L -- 386(L) x 230(W) x 381(H) mm

 

[Say Heading]

Did you check the regulations of the airlines that you are usually traveling with? According to IATA regulations the actual limit (recommendation) is 55cmx40cmx20cm with max 8kg, but many airlines differ - up or down, sometimes depending on ticket class.

 

[macs_forever]

Those are specific to the airline I fly every couple of weeks but they should also be accurate for any 737 flight. Smaller commuter jets are much tighter.

 

[macs_forever]

CoolerMaster RC-102C-KKN2 -- 183(W) x 424(H) x 397(D) mm / 7.2(W) x 16.7(H) x 15.6(D) inch

An unremarkable kinda ugly case that would fit on any airline (maybe).