Best graphics card for Hackintosh

[Adrian B]

You have Inject/Intel/True set in Clover. Use Clover Configurator to change to Inject/Intel/False
https://www.tonymacx86.com/resources/clover-configurator.328/

Also confirm that you have not used nv_disable=1 as this will is designed to prevent the nvidia drivers from loading.

 

[Chuck23]

You have Inject/Intel/True set in Clover. Use Clover Configurator to change to Inject/Intel/False
https://www.tonymacx86.com/resources/clover-configurator.328/

Also confirm that you have not used nv_disable=1 as this will is designed to prevent the nvidia drivers from loading.

How do I install and use this tool? How can I know if I have nv_disable=1?

 

[Adrian B]

Shut down and reboot your computer.
At the clover boot screen press the space bar on your keyboard. Navigate using the arrow keys and look to see what options are available. You should be able to boot with the correct options.
Once at the desktop, download and open Clover Configurator.
Mount EFI if Clover installed to EFI partition.
Open /EFI/Clover/Config.plist
Look at the option on the left hand side of Clover Configurator (boot options? or similar) and select/deselect options as required. From memory this may be all that is required. if you cannot find these options then have a look under other graphics related heading on the left hand side of the clover configurator application.
Save options and reboot to test.

Lots of information can be found by using the search feature:
https://www.tonymacx86.com/forums/the-basics.165/
https://www.tonymacx86.com/threads/clover-basics-and-switching-advice.171680/#4
https://www.tonymacx86.com/threads/...ported-intel-based-pc.200564/#troubleshooting

 

[Chuck23]

Shut down and reboot your computer.
At the clover boot screen press the space bar on your keyboard. Navigate using the arrow keys and look to see what options are available. You should be able to boot with the correct options.
Once at the desktop, download and open Clover Configurator.
Mount EFI if Clover installed to EFI partition.
Open /EFI/Clover/Config.plist
Look at the option on the left hand side of Clover Configurator (boot options? or similar) and select/deselect options as required. From memory this may be all that is required. if you cannot find these options then have a look under other graphics related heading on the left hand side of the clover configurator application.
Save options and reboot to test.

Lots of information can be found by using the search feature:
https://www.tonymacx86.com/forums/the-basics.165/
https://www.tonymacx86.com/threads/clover-basics-and-switching-advice.171680/#4
https://www.tonymacx86.com/threads/...ported-intel-based-pc.200564/#troubleshooting

I managed to get f¡graphics acceleration by disabling nv_disable=1, however I cannot mount EFI partition, I'll see if there is another way (I'm going to try multibeast).

Another thing... Is there any drivers for Ralink 2770? I've searched a bit but found nothing useful.

 

[Adrian B]

I managed to get f¡graphics acceleration by disabling nv_disable=1, however I cannot mount EFI partition, I'll see if there is another way (I'm going to try multibeast).

https://www.tonymacx86.com/threads/how-to-mount-efi-partition.174321/
nv_disable=1 is not in MultiBeast, you need to do it via Clover Configurator. You can also find out how to mount the EFI partitiona from the following link:
https://www.tonymacx86.com/forums/the-basics.165/

Another thing... Is there any drivers for Ralink 2770? I've searched a bit but found nothing useful.

Looks like that is a negative.

 

[Chuck23]

https://www.tonymacx86.com/threads/how-to-mount-efi-partition.174321/
nv_disable=1 is not in MultiBeast, you need to do it via Clover Configurator. You can also find out how to mount the EFI partitiona from the following link:
https://www.tonymacx86.com/forums/the-basics.165/


Looks like that is a negative.

What about for PCI RT3062F or PCI RTL8185L?

 

[Adrian B]

For wifi support - stick with the tried and proven hardware. Avoid everything else as it is going to be a waste of time and money.

 

[Chuck23]

For wifi support - stick with the tried and proven hardware. Avoid everything else as it is going to be a waste of time and money.

I bought the one you told me to (WIFI + BLUETOOTH), but it doesn't arrive untill next week. I also got the GPU working (HDMI audio not working) can I solve the audio problem?

Attempting to build 2... The sky lake and 200 series... How can I change the CPU ID? I tried in clover (unibeast legacy bootloader) but I didn't find it

 

[Chuck23]

@Adrian B I am also having problems booting with the USB stick, when UEFI boot loather (on GA-Z270X and kaby lake) I get an "boot0af: error" and when legacy mode I don't get the option in the USB of install. What can I do?

 

[Adrian B]

Don't use legacy mode for modern hardware. Create a UEFI installation for this hardware. For Fake CPU ID stuff use the Kaby Lake/ 200 series boards testing thread - it clearly sets out what to do.
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/
https://www.tonymacx86.com/threads/...cpus-200-series-motherboards-in-macos.211743/

HDMI audio requires additional work over and above the basic installation process:
https://www.tonymacx86.com/threads/new-automatic-hdmi-audio-script-released.184867/