Contribute
Register

Beelzebozo's OS X Yosemite Video Guide- i7-4770K - GA Z97X-UD5H - 16GB RAM - Intel HD Graphics 4600

Status
Not open for further replies.

beelzebozo

Super Moderator
Joined
Mar 31, 2010
Messages
3,718
Motherboard
Gigabyte z690-AERO-G-DDR4
CPU
i7-13700K
Graphics
RX 6900 XT
Mac
  1. iMac
Classic Mac
  1. Power Mac
Mobile Phone
  1. iOS
hello, I have a little problem my computer shuts down (frezee) in case you can help me I have:

* i7-4770K - GA-Z97X UD5H -
24 GB RAM DDR3 1600 MHz
ntel HD Graphics 4600
 
hello, I have a little problem my computer shuts down (frezee) in case you can help me I have:

* i7-4770K - GA-Z97X UD5H -
24 GB RAM DDR3 1600 MHz
ntel HD Graphics 4600

Make sure the Wake On Lan setting is disabled in Bios and in Energy Saver in System Preferences.
 
Have you tested on an over-HD screen? If it works, what did you do; what is your device ID from system profiler? My HD4600 doesn't go over 1920x1080 on a 2560x1440 screen since upgrading to 10.9.5 and 10.10. Thanks!
 
My DELL monitor is 1900 x 1200. You can set an HD resolution in org.chameleon.boot.plist. There is an option for 1900 x 1080 in MultiBeast which you can modify after.
 
Hi :)

I'm planning to buy exactly the same CPU and maybe the same motherboard as your.
Should I install the 3rd party sata kext? My HDD will be the WD black.
The CPU will be 100% the i7 4770K, but about the motherboards I'm not sure...can you suggest me some motherboard? Which would be the best choice now for Yosemite? I'm thinking about Z87X-UD3H, Z97X-UD3H and on Z97X-UD5H.

Did you updated the BIOS to F8? I can't recognize from the youtube video.
Everything works properly?
 
Do you have airplay mirroring working on your build?
 
Hi

Thank you for the guide. I use your method to install yosemite, then I install the kext, bootloader and optimizations with unibeast but i have not graphic aceleration. Yosemite detect my integrated graphics as intel hd 4600 3mb and the audio dont work. Any idea?
 
Status
Not open for further replies.
Back
Top