BCM94360CDAX for Wifi and BT

Helmi74 · Jul 1, 2016

Hi,

from what I read everywhere the BCM94360CDAX should be working out of the Box on a Hack without any modifications. Mine isn't so I'm unsure where to start. I'm using the Card in one of these PCIEx adapter cards. I have put everything together and tested in different slots - currently it's in the first PCIex_1 slot (above the GTX970).

Problem is I can't find it anyhwere with IOService or in the system report of OSX.

The PCI section in system report even says there are no PCI cards in this computer (actually there are the GTX970 and the BCM).

I assume there's something basically going wrong.

Any ideas where to start?

I'm on an Asus Maximus VIII Hero, i7 6700k, 32GB G.Skill TridentZ Mem, SM951 M.2 SSD, EVGA GTX970SSC.

Helmi74 · Jul 2, 2016

Ok, i gotten a bit further but still don't have a clue what's missing.

Looks like the card is definitely working as DPCI sees it. Maybe I still have to walk through the Airport Guide to get it to run.

Helmi74 · Jul 2, 2016

After installing Windows 10 on the same hardware and installing the Broadcom Drivers from the Bootcamp Package i also can't get it to run there although i do see it in the Hardware device manager there too.

Any ideas? I'm kind of baffled.

Helmi74 · Jul 2, 2016

Found the boot log in DPCIManager

Code:

0:100  0:100  MemLog inited, TSC freq: 4008549730
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000
0:100  0:000  Now is 2.7.2016,  18:11:18 (GMT)
0:100  0:000  Starting Clover rev 3577 on American Megatrends EFI
0:100  0:000  Build with: [Args: ./ebuild.sh | Command: build -D USE_LOW_EBDA -p Clover/Clover.dsc -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.11.6 | XCODE: 7.3.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,7B8B6952-64F6-495E-8E94-2AF79845F7AB,0x28,0x64000) @82261718
0:100  0:000  SelfDirPath = \EFI\BOOT
0:102  0:001  Total Memory Slots Count = 4
0:102  0:000  Type 17 Index = 0
0:102  0:000  SmbiosTable.Type17->Speed = 3200MHz
0:102  0:000  SmbiosTable.Type17->Size = 8192MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM1
0:102  0:000  SmbiosTable.Type17->Vendor = G-Skill
0:102  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:102  0:000  SmbiosTable.Type17->PartNumber = F4-3200C16-8GTZB  
0:102  0:000  Type 17 Index = 1
0:102  0:000  SmbiosTable.Type17->Speed = 3200MHz
0:102  0:000  SmbiosTable.Type17->Size = 8192MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM2
0:102  0:000  SmbiosTable.Type17->Vendor = G-Skill
0:102  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:102  0:000  SmbiosTable.Type17->PartNumber = F4-3200C16-8GTZB  
0:102  0:000  Type 17 Index = 2
0:102  0:000  SmbiosTable.Type17->Speed = 3200MHz
0:102  0:000  SmbiosTable.Type17->Size = 8192MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM1
0:102  0:000  SmbiosTable.Type17->Vendor = G-Skill
0:102  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:102  0:000  SmbiosTable.Type17->PartNumber = F4-3200C16-8GTZB  
0:102  0:000  Type 17 Index = 3
0:102  0:000  SmbiosTable.Type17->Speed = 3200MHz
0:102  0:000  SmbiosTable.Type17->Size = 8192MB
0:102  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM2
0:102  0:000  SmbiosTable.Type17->Vendor = G-Skill
0:102  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:102  0:000  SmbiosTable.Type17->PartNumber = F4-3200C16-8GTZB  
0:102  0:000  Boot status=0
0:102  0:000  Clover revision: 3577  running on System Product Name
0:102  0:000  ... with board MAXIMUS VIII HERO
0:102  0:000  CPU Vendor = 756E6547 Model=506E3
0:102  0:000  got cores from CPUID_1 = 0
0:102  0:000  The CPU supported turbo
0:102  0:000  BrandString = Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
0:102  0:000   TSC/CCC Information Leaf:
0:102  0:000    numerator     : 334
0:102  0:000    denominator   : 2
0:102  0:000   Calibrated ARTFrequency: 24003291
0:102  0:000  MSR 0xE2 before patch 00000000
0:102  0:000  MSR 0xE4              00000000
0:102  0:000  MSR 0xCE              00080838_F1012800
0:102  0:000  non-usable FLEX_RATIO = F0000
0:102  0:000  corrected FLEX_RATIO = E0000
0:102  0:000  MSR 0x1B0             00000000
0:102  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:102  0:000  Corrected FSBFrequency=100MHz
0:102  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:102  0:000  Family/ExtFamily: 0x6/0x0
0:102  0:000  MaxDiv/MinDiv: 40.0/8
0:102  0:000  Turbo: 42/42/42/42
0:102  0:000  Features: 0xBFEBFBFF
0:102  0:000  Threads: 8
0:102  0:000  Cores: 4
0:102  0:000  FSB: 100 MHz
0:102  0:000  CPU: 4000 MHz
0:102  0:000  TSC: 4000 MHz
0:102  0:000  PIS: 400 MHz
0:102  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:102  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:102  0:000  PCI (00|01:00.00) : 10DE 13C2 class=030000
0:102  0:000  Found NVidia model=EVGA GeForce GTX 970 family 124
0:102  0:000  PCI (00|01:00.01) : 10DE 0FBB class=040300
0:102  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:102  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:102  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:102  0:000  PCI (00|00:1B.00) : 8086 A167 class=060400
0:102  0:000  PCI (00|00:1B.02) : 8086 A169 class=060400
0:102  0:000  PCI (00|03:00.00) : 14E4 4360 class=028000
0:102  0:000  PCI (00|00:1B.03) : 8086 A16A class=060400
0:102  0:000  PCI (00|04:00.00) : 1B21 0612 class=010601
0:102  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:102  0:000  PCI (00|05:00.00) : 1B21 1242 class=0C0330
0:102  0:000  PCI (00|00:1D.00) : 8086 A118 class=060400
0:102  0:000  PCI (00|06:00.00) : 144D A801 class=010601
0:102  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:102  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:102  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:102  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:102  0:000  PCI (00|00:1F.06) : 8086 15B8 class=020000
0:102  0:000  LAN 0, Vendor=8086, MMIO=DF500000
0:102  0:000  Clover load options size = 0 bytes
0:105  0:002  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:105  0:000  EFI\CLOVER\config.plist loaded: Success
0:105  0:000  Found theme directory: embedded
0:105  0:000  Found theme directory: random
0:105  0:000  Loading early settings
0:105  0:000  timeout set to 5
0:105  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:105  0:000  KextsToPatch: 5 requested
0:105  0:000  KextsToPatch 0: AppleHDA (10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
0:105  0:000  KextsToPatch 1: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:105  0:000  KextsToPatch 2: AppleGraphicsDevicePolicy ((c)Pike R. Alpha) Kext bin patch, data len: 8
0:105  0:000  KextsToPatch 3: AppleHDA (AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:105  0:000  KextsToPatch 4: AppleHDA (10.9-10.11-AppleHDA/Realtek ALC1150) Kext bin patch, data len: 4
0:105  0:000  Default theme: embedded
0:105  0:000  Hiding entries with string Windows
0:105  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:105  0:000  LoadDrivers() start
0:106  0:000  Loading FSInject-64.efi  status=Success
0:107  0:000  Loading OsxAptioFix2Drv-64.efi  status=Success
0:107  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:107  0:000  Loading VBoxHfs-64.efi  status=Success
0:107  0:000   - driver needs connecting
0:107  0:000  Loading CsmVideoDxe-64.efi  status=Success
0:109  0:001   - driver needs connecting
0:109  0:000  2 drivers needs connecting ...
0:109  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:109  0:000  Video driver loaded: disconnect Success
0:110  0:001  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:495  0:384  LoadDrivers() end
0:495  0:000  Dump SMC keys from NVRAM:
0:503  0:007  SetScreenResolution: 1920x1080 - not found!
0:503  0:000  Console modes reported: 4, available modes:
0:503  0:000    Mode 1: 80x25 (current mode)
0:503  0:000    Mode 2: 80x50
0:503  0:000    Mode 3: 100x31
0:503  0:000    Mode 4: 640x151
0:503  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,7B8B6952-64F6-495E-8E94-2AF79845F7AB,0x28,0x64000)
0:503  0:000  MAC address of LAN #0= 9C:5C:8E:BE:D8:EC:
0:503  0:000  ScanSPD() start
0:504  0:000  SMBus device : 8086 A123 class=0C0500 status=Success
0:504  0:000  SMBus CmdReg: 0x3
0:504  0:000  Scanning SMBus [8086:A123], mmio: 0xDF54A004, ioport: 0xF000, hostc: 0x11
0:504  0:000  Slots to scan [8]...
0:504  0:000  SPD[0]: Got invalid type 0 @0x50. Will set page and retry.
0:505  0:000  SPD[0]: Type 12 @0x50
0:521  0:016  XMP Profile1: 5*125 0 ns
0:521  0:000  Found module with XMP version 2.0
0:521  0:000  DDR speed 2132MHz
0:521  0:000  Slot: 0 Type 26 8192MB 2132MHz Vendor=G Skill Intl PartNo=F4-3200C16-8GTZB SerialNo=0000000000000000
0:522  0:000  SPD[1]: Type 12 @0x51
0:538  0:016  XMP Profile1: 5*125 0 ns
0:538  0:000  Found module with XMP version 2.0
0:538  0:000  DDR speed 2132MHz
0:538  0:000  Slot: 1 Type 26 8192MB 2132MHz Vendor=G Skill Intl PartNo=F4-3200C16-8GTZB SerialNo=0000000000000000
0:539  0:000  SPD[2]: Type 12 @0x52
0:555  0:016  XMP Profile1: 5*125 0 ns
0:555  0:000  Found module with XMP version 2.0
0:555  0:000  DDR speed 2132MHz
0:555  0:000  Slot: 2 Type 26 8192MB 2132MHz Vendor=G Skill Intl PartNo=F4-3200C16-8GTZB SerialNo=0000000000000000
0:556  0:000  SPD[3]: Type 12 @0x53
0:572  0:016  XMP Profile1: 5*125 0 ns
0:572  0:000  Found module with XMP version 2.0
0:572  0:000  DDR speed 2132MHz
0:572  0:000  Slot: 3 Type 26 8192MB 2132MHz Vendor=G Skill Intl PartNo=F4-3200C16-8GTZB SerialNo=0000000000000000
0:573  0:000  ScanSPD() end
0:573  0:000  Get Acpi Tables List from RSDT:
0:573  0:000   Found table: FACP  A M I  len=132
0:573  0:000   Found table: APIC  A M I  len=188
0:573  0:000   Found table: FPDT  A M I  len=68
0:573  0:000   Found table: FIDT  A M I  len=156
0:573  0:000   Found table: MCFG  A M I len=60
0:573  0:000   Found table: HPET  A M I len=56
0:573  0:000   Found table: SSDT  SataTabl len=877
0:573  0:000   Found table: LPIT  SKL len=148
0:573  0:000   Found table: SSDT  sensrhub len=584
0:573  0:000   Found table: SSDT  PtidDevc len=11182
0:573  0:000   Found table: SSDT  Ther_Rvp len=3043
0:573  0:000   Found table: SSDT  UsbCTabl len=43
0:573  0:000   Found table: DBGP   len=52
0:573  0:000   Found table: DBG2   len=84
0:573  0:000   Found table: SSDT  xh_rvp08 len=1789
0:573  0:000   Found table: SSDT  SaSsdt  len=21226
0:573  0:000   Found table: UEFI   len=66
0:573  0:000   Found table: SSDT  CpuSsdt len=3672
0:573  0:000   Found table: BGRT  A M I  len=56
0:573  0:000  Calibrated TSC frequency =4008549730 =4008MHz
0:573  0:000  Loading main settings
0:573  0:000  PatchesDSDT: 1 requested
0:573  0:000   DSDT bin patch #0  lenToFind=4  lenToReplace=4
0:573  0:000  Config set ChassisType=0xD
0:573  0:000  KextsToPatch: 5 requested
0:573  0:000  KextsToPatch 0: AppleHDA (10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
0:573  0:000  KextsToPatch 1: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
0:573  0:000  KextsToPatch 2: AppleGraphicsDevicePolicy ((c)Pike R. Alpha) Kext bin patch, data len: 8
0:573  0:000  KextsToPatch 3: AppleHDA (AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
0:573  0:000  KextsToPatch 4: AppleHDA (10.9-10.11-AppleHDA/Realtek ALC1150) Kext bin patch, data len: 4
0:573  0:000  found 12 volumes with blockIO
0:573  0:000   0. Volume:
0:573  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)
0:575  0:002   1. Volume:
0:575  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)
0:576  0:000   2. Volume:
0:576  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,A5496F6C-AE0B-43DF-B2A2-36E85B553544,0x800,0xE1000)
0:576  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:576  0:000   3. Volume:
0:576  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E27CBE52-CA35-482B-9047-BEDA1E2F2114,0xE1800,0x32000)
0:577  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:577  0:000   4. Volume:
0:577  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,4D4479A1-70E1-4213-9C94-6DE33C3686E2,0x113800,0x8000)
0:577  0:000   5. Volume:
0:577  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,1004839B-7B91-4044-B063-9E9D34E6301C,0x11B800,0x3B8C5800)
0:578  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:578  0:000   6. Volume:
0:578  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,234F0F15-3885-40AF-9010-6A8CFEC2264A,0x28,0x64000)
0:579  0:000    Result of bootcode detection: bootable unknown (legacy)
0:579  0:000   7. Volume:
0:579  0:000    PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,E3901434-BFA2-406D-9C07-FCCAC169133D,0x64028,0x15D466360)
0:579  0:000   8. Volume:
0:579  0:000    PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Sata(0x0,0xFFFF,0x0)
0:581  0:001   9. Volume:
0:581  0:000    PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,7B8B6952-64F6-495E-8E94-2AF79845F7AB,0x28,0x64000)
0:581  0:000    Result of bootcode detection: bootable unknown (legacy)
0:581  0:000    This is SelfVolume !!
0:581  0:000  10. Volume:
0:581  0:000    PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,2E8E5DC7-2884-4914-8C3A-72421CF71A88,0x64028,0x3B847340)
0:582  0:000  11. Volume:
0:582  0:000    PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Sata(0x0,0xFFFF,0x0)\HD(3,GPT,6A14245E-AC19-415A-8CD7-BB89A3723551,0x3B8AB368,0x135F20)
0:583  0:000   using embedded theme
0:583  0:000  Choosing theme <null string>
0:583  0:000  found boot-args in NVRAM:nvda_drv=1, size=11
0:583  0:000  ...found arg:nvda_drv=1
0:583  0:000  Custom legacy start
0:583  0:000  Custom legacy end
0:583  0:000  Scanning legacy ...
0:583  0:000   0: 'Whole Disc Boot' (legacy) not legacy
0:583  0:000   1: 'Whole Disc Boot' (legacy) not legacy
0:583  0:000   2: 'Recovery' (vista,win) add legacy
0:583  0:000   added 'Boot Windows from Recovery' OSType=2 Icon=vista,win
0:583  0:000   3: 'EFI' (vista,win) add legacy
0:583  0:000   added 'Boot Windows from EFI' OSType=2 Icon=vista,win
0:583  0:000   4: 'Legacy HD3' (legacy) not legacy
0:583  0:000   5: '' (vista,win) add legacy
0:583  0:000   added 'Boot Windows from ' OSType=2 Icon=vista,win
0:583  0:000   6: 'EFI' (legacy) not legacy
0:583  0:000   7: 'Backint 1' (legacy) not legacy
0:583  0:000   8: 'Whole Disc Boot' (legacy) not legacy
0:583  0:000   9: 'EFI' (legacy) not legacy
0:583  0:000  10: 'Mac SSD' (legacy) not legacy
0:583  0:000  11: 'Recovery HD' (legacy) not legacy
0:583  0:000  Custom entries start
0:583  0:000  Custom entries finish
0:583  0:000  Scanning loaders...
0:583  0:000   0: 'Whole Disc Boot' no file system
0:583  0:000   1: 'Whole Disc Boot' no file system
0:583  0:000   2: 'Recovery'
0:583  0:000   3: 'EFI'
0:585  0:001      AddLoaderEntry for Volume Name=EFI
0:585  0:000   4: 'Legacy HD3' no file system
0:585  0:000   5: ''
0:585  0:000   6: 'EFI'
0:585  0:000   7: 'Backint 1'
0:605  0:019   8: 'Whole Disc Boot' no file system
0:605  0:000   9: 'EFI'
0:605  0:000  10: 'Mac SSD'
0:616  0:010      AddLoaderEntry for Volume Name=Mac SSD
0:622  0:005      Check if volume Is Hibernated:
0:622  0:000      Check sleep image 'by signature':
0:630  0:008      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
0:630  0:000      SleepImage name from pref: ImageVolume = 'Mac SSD', ImageName = '\private\var\vm\sleepimage'
0:638  0:007      sleepimage not found -> Not Found
0:638  0:000       hibernated: no - sign
0:641  0:002  11: 'Recovery HD'
0:642  0:001      AddLoaderEntry for Volume Name=Recovery HD
0:643  0:000  Custom tool start
0:643  0:000  Custom tool end
0:644  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
0:644  0:000  Checking EFI partition Volume 3 for Clover
0:644  0:000  Checking EFI partition Volume 6 for Clover
0:644  0:000  Checking EFI partition Volume 9 for Clover
0:644  0:000   Found Clover
0:644  0:000  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
0:645  0:000  EfiBootVolume not found
0:645  0:000   found entry 4. 'Boot Mac OS X from Mac SSD', Volume 'Mac SSD', DevicePath 'PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,2E8E5DC7-2884-4914-8C3A-72421CF71A88,0x64028,0x3B847340)\System\Library\CoreServices\boot.efi'
0:645  0:000  DefaultIndex=4 and MainMenu.EntryCount=12
0:649  0:004  Found Mouse device:
0:649  0:000  GUI ready
14:688  14:039  BootOption of the entry is empty
14:688  0:000  StartLoader() start
14:688  0:000  Entry->Settings: <null string>
14:688  0:000  Finally: Bus=100213kHz CPU=4009MHz
14:688  0:000  Kernel and Kext Patches at 7AB3DC28:
14:688  0:000      Allowed: y
14:688  0:000      Debug: n
14:688  0:000      KernelCpu: n
14:688  0:000      Lapic: n
14:688  0:000      Haswell-E: n
14:688  0:000      AICPUPM: y
14:688  0:000      AppleRTC: y
14:688  0:000      KernelPm: y
14:688  0:000      FakeCPUID: 0x0
14:688  0:000      ATIController: null
14:688  0:000      ATIDataLength: 0
14:688  0:000      0 Kexts to load
14:688  0:000      5 Kexts to patch
14:688  0:000        KextPatch[0]: 4 bytes, AppleHDA
14:688  0:000        KextPatch[1]: 8 bytes, AppleAHCIPort
14:688  0:000        KextPatch[2]: 8 bytes, AppleGraphicsDevicePolicy
14:688  0:000        KextPatch[3]: 6 bytes, AppleHDA
14:688  0:000        KextPatch[4]: 4 bytes, AppleHDA
14:688  0:000  Loading boot.efi  status=Success
14:807  0:118  GetOSVersion: : 10.11.5
14:807  0:000  insert table 9 for dev 0:0
14:807  0:000  insert table 9 for dev 0:1
14:807  0:000  insert table 9 for dev 1F:6
14:807  0:000  insert table 9 for dev 0:0
14:808  0:000  Channels: 2
14:808  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
14:808  0:000  SMBIOS Type 17 Index = 0 => 0 0:
14:808  0:000  BANK0 DIMM0 2132MHz 8192MB
14:808  0:000  SMBIOS Type 17 Index = 1 => 2 2:
14:808  0:000  BANK1 DIMM0 2132MHz 8192MB
14:808  0:000  SMBIOS Type 17 Index = 2 => 1 1:
14:808  0:000  BANK0 DIMM1 2132MHz 8192MB
14:808  0:000  SMBIOS Type 17 Index = 3 => 3 3:
14:808  0:000  BANK1 DIMM1 2132MHz 8192MB
14:808  0:000  mTotalSystemMemory = 32768
14:808  0:000  NumberOfMemoryDevices = 4
14:808  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
14:808  0:000  Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
14:808  0:000  Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
14:808  0:000  Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
14:808  0:000  Table 131 is present, CPUType=31
14:808  0:000  Change to: 705
14:808  0:000  RSDT 0x86B5D028
14:808  0:000  FADT from RSDT: 0x86B5D170
14:808  0:000  XSDT 0x86B5D0A0
14:808  0:000  FADT from XSDT: 0x86B803D8
14:808  0:000  Xsdt reallocation done
14:808  0:000  old FADT length=10C
14:808  0:000  Apply DsdtFixMask=0x00000000 old way
14:808  0:000     drop _DSM mask=0x0000
14:808  0:000  ========= Auto patch DSDT Starting ========
14:808  0:000  VideoCard devID=0x13C210DE
14:808  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
14:808  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
14:808  0:000  Found Airport BCM at 0x1B0002, 0x0
14:808  0:000  USBADR[1] = 0x1C0000 and PCIe = 0x0
14:808  0:000  Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
14:808  0:000   Patch pattern 48444153 :: patched at: [ (A58C) (19F6) (86) (D) (A1) (6A) ]
14:808  0:000  first CPU found at 8F5A offset 8F5D
14:808  0:000  score candidate at 8F56
14:808  0:000  score inserted in acpi_cpu_score _PR_
14:808  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7
  within the score: _PR_
14:809  0:000  Found PCIROOTUID = 0
14:809  0:000  ========= Auto patch DSDT Finished ========
14:809  0:000  Patch table: SSDT  SataTabl
14:809  0:000   SSDT len = 0x36D
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Patch table: SSDT  sensrhub
14:809  0:000   SSDT len = 0x248
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Patch table: SSDT  PtidDevc
14:809  0:000   SSDT len = 0x2BAE
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Patch table: SSDT  Ther_Rvp
14:809  0:000   SSDT len = 0xBE3
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Patch table: SSDT  UsbCTabl
14:809  0:000   SSDT len = 0x2B
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Patch table: SSDT  xh_rvp08
14:809  0:000   SSDT len = 0x6FD
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Patch table: SSDT  SaSsdt
14:809  0:000   SSDT len = 0x52EA
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Patch table: SSDT  CpuSsdt
14:809  0:000   SSDT len = 0xE58
14:809  0:000   Patch pattern 48444153 :: bin not found!
14:809  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
14:809  0:000   Xsdt has tables count=19
14:809  0:000  corrected XSDT length=188
14:809  0:000   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
14:809  0:000  EdidDiscovered size=384
14:809  0:000  00 | 00 FF FF FF FF FF FF 00 10 AC B6 40 53 36 39 30
14:809  0:000  16 | 23 19 01 04 B5 3C 22 78 3A 72 25 AC 50 33 B7 26
14:809  0:000  32 | 0B 50 54 21 08 00 81 00 B3 00 D1 00 A9 40 81 80
14:809  0:000  48 | D1 C0 01 01 01 01 56 5E 00 A0 A0 A0 29 50 30 20
14:809  0:000  64 | 35 00 55 50 21 00 00 1A 00 00 00 FF 00 46 31 4A
14:809  0:000  80 | 43 4D 35 38 54 30 39 36 53 0A 00 00 00 FC 00 44
14:809  0:000  96 | 45 4C 4C 20 55 50 32 37 31 35 4B 0A 00 00 00 FD
14:809  0:000  112 | 00 1D 4B 1F B4 36 01 0A 20 20 20 20 20 20 02 9D
14:809  0:000  128 | 02 03 0C F1 23 09 07 07 83 01 00 00 4D D0 00 A0
14:809  0:000  144 | F0 70 3E 80 50 20 65 0C 55 50 21 00 00 18 56 5E
14:809  0:000  160 | 00 A0 A0 A0 29 50 30 20 35 00 55 50 21 00 00 1A
14:809  0:000  176 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
14:809  0:000  192 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
14:809  0:000  208 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
14:809  0:000  224 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
14:809  0:000  240 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 34
14:809  0:000  256 | 00 FF FF FF FF FF FF 00 10 AC B6 40 53 36 39 30
14:809  0:000  272 | 23 19 01 04 B5 3C 22 78 3A 72 25 AC 50 33 B7 26
14:809  0:000  288 | 0B 50 54 21 08 00 81 00 B3 00 D1 00 A9 40 81 80
14:809  0:000  304 | D1 C0 01 01 01 01 56 5E 00 A0 A0 A0 29 50 30 20
14:809  0:000  320 | 35 00 55 50 21 00 00 1A 00 00 00 FF 00 46 31 4A
14:809  0:000  336 | 43 4D 35 38 54 30 39 36 53 0A 00 00 00 FC 00 44
14:809  0:000  352 | 45 4C 4C 20 55 50 32 37 31 35 4B 0A 00 00 00 FD
14:809  0:000  368 | 00 1D 4B 1F B4 36 01 0A 20 20 20 20 20 20 02 9D
14:809  0:000  NVidia GFX injection not set
14:809  0:000   RCBA disabled; cannot use it
14:809  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => setting specified layout-id=1 (0x1)
14:809  0:000  LAN Controller [8086:15B8] :: PciRoot(0x0)\Pci(0x1F,0x6)
14:809  0:000  stringlength = 540
14:809  0:000  CurrentMode: Width=1280 Height=720
14:809  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 82261498
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 82261498
14:815  0:005  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
14:815  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
14:816  0:000  Removed efi-boot-device-data variable: Not Found
14:816  0:000  Custom boot is disabled
14:817  0:000  Closing log

The only line I could find related to the Card is the one i marked in red.

EDIT: That red marking seems to not work in the code box. It's this line:

Code:

14:808  0:000  Found Airport BCM at 0x1B0002, 0x0

Can probably anyone having that card running have a look and compare? From what I could read from other thread the Card should automatically be visible in system profile under network but that isn't the case here. The same is true for Bluetooth.

Search

BCM94360CDAX for Wifi and BT

Helmi74

Helmi74

Attachments

Helmi74

Helmi74

Forum

Guides

Downloads