Contribute
Register

BCM94352HMB issues

Status
Not open for further replies.
Check what on Ubuntu?
you said no bt both windows +osx that's why ,
if you don't mind further it's okay ,
i just gave an idea will no longer comment here
 
you said no bt both windows +osx that's why ,
if you don't mind further it's okay ,
i just gave an idea will no longer comment here

Hmm, will test.

And keeping on commenting if you want, i appreciate all you help.:headbang:
 
In device manager:

Vendor ID: 0x13D3
Product ID: 0x3404

what are your product and vendor id's? (for everyone to answer)

My BT device info already posted here.
 
Using BCM94352Z, close enough. Wifi works great. Bluetooth does on boot, but not so post sleep.

If I use patchram2 and firmwaredata in clover/kexts, bluetooth shows after sleep, but does not discover devices,
while with patchram2 and firmwarerepo in S/L/E, the bluetooth becomes 'Not Available' after sleep, though the device still shows under USB in system report.
Switching to airplane and back does not help, rebooting does. Any Ideas?
 
Using BCM94352Z, close enough. Wifi works great. Bluetooth does on boot, but not so post sleep.

If I use patchram2 and firmwaredata in clover/kexts,

Wrong. Installing to EFI/Clover/kexts requires a lot of special steps (documented in the README).

Install to /S/L/E or /L/E.

bluetooth shows after sleep, but does not discover devices,
while with patchram2 and firmwarerepo in S/L/E, the bluetooth becomes 'Not Available' after sleep, though the device still shows under USB in system report.
Switching to airplane and back does not help, rebooting does. Any Ideas?

Check system.log for output from brcmpatchram.
 
Install to /S/L/E or /L/E.



Check system.log for output from brcmpatchram.

Code:
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: Version 2.2.2 starting on OS X Darwin 15.0.[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: USB [346895ED054C v274] "BCM20702A0" by "Broadcom Corp"[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Firmware upgrade completed successfully.[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Found existing IOKit personality "com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport".[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: Processing time 0.389 seconds.[/FONT]
[FONT=Helvetica]
[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: Version 2.2.2 starting on OS X Darwin 15.0.[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: USB [346895ED054C v274] "BCM20702A0" by "Broadcom Corp"[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Firmware upgrade completed successfully.[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Found existing IOKit personality "com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport".[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: Processing time 0.382 seconds.[/FONT]
[FONT=Helvetica]
[/FONT]
[FONT=Helvetica]Dec  3 21:43:04 ps kernel[0]: BrcmPatchRAM2: Version 2.2.2 starting on OS X Darwin 15.0.[/FONT]
[FONT=Helvetica]Dec  3 21:43:04 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: USB [346895ED054C v274] "BCM20702A0" by "Broadcom Corp"[/FONT]
[FONT=Helvetica]Dec  3 21:43:14 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Firmware upgrade completed successfully.[/FONT]
[FONT=Helvetica]Dec  3 21:43:14 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Found existing IOKit personality "com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport".[/FONT]
[FONT=Helvetica]Dec  3 21:43:14 ps kernel[0]: BrcmPatchRAM2: Processing time 10.44 seconds.[/FONT]

The first block's after boot(BT working), the second after sleep from power menu with power cord attached, in case it helps anyway,(BT working),
while the third, power cord removed, LID sleep(BT NOT working). Also, the processing time is 10.44 secs in the LID sleep.
 
Code:
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: Version 2.2.2 starting on OS X Darwin 15.0.[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: USB [346895ED054C v274] "BCM20702A0" by "Broadcom Corp"[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Firmware upgrade completed successfully.[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Found existing IOKit personality "com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport".[/FONT]
[FONT=Helvetica]Dec  3 20:23:53 ps kernel[0]: BrcmPatchRAM2: Processing time 0.389 seconds.[/FONT]
[FONT=Helvetica]
[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: Version 2.2.2 starting on OS X Darwin 15.0.[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: USB [346895ED054C v274] "BCM20702A0" by "Broadcom Corp"[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Firmware upgrade completed successfully.[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Found existing IOKit personality "com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport".[/FONT]
[FONT=Helvetica]Dec  3 21:40:13 ps kernel[0]: BrcmPatchRAM2: Processing time 0.382 seconds.[/FONT]
[FONT=Helvetica]
[/FONT]
[FONT=Helvetica]Dec  3 21:43:04 ps kernel[0]: BrcmPatchRAM2: Version 2.2.2 starting on OS X Darwin 15.0.[/FONT]
[FONT=Helvetica]Dec  3 21:43:04 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: USB [346895ED054C v274] "BCM20702A0" by "Broadcom Corp"[/FONT]
[FONT=Helvetica]Dec  3 21:43:14 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Firmware upgrade completed successfully.[/FONT]
[FONT=Helvetica]Dec  3 21:43:14 ps kernel[0]: BrcmPatchRAM2: [0a5c:216f]: Found existing IOKit personality "com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport".[/FONT]
[FONT=Helvetica]Dec  3 21:43:14 ps kernel[0]: BrcmPatchRAM2: Processing time 10.44 seconds.[/FONT]

The first block's after boot(BT working), the second after sleep from power menu with power cord attached, in case it helps anyway,(BT working),
while the third, power cord removed, LID sleep(BT NOT working). Also, the processing time is 10.44 secs in the LID sleep.

10 sec processing time is a problem. Likely a USB problem.

http://www.tonymacx86.com/el-capitan-laptop-support/173616-guide-10-11-usb-changes-solutions.html
 
I am running Xcode 7.2 from the App Store

I am trying to compile BrcmBluetoothInjector.kext, and i have added the repo (https://github.com/RehabMan/OS-X-BrcmPatchRAM.git) to Xcode, then when i click compile i get errors:

Code:
error: There is no SDK with the name or path '/Users/Hamzaom675/Desktop/BrcmPatchRAM/macosx10.6
How do i fix this? or should i change the OSX Deployment Target to 10.11?
Also Should i update to the recommended settings? like it says in Xcode?
Here is a picture of the settings it wants to change:
Screen Shot 2015-12-25 at 14.33.11.png
 
Status
Not open for further replies.
Back
Top