- Joined
- Jul 25, 2016
- Messages
- 13
- Motherboard
- Asus Z370 Prime-A II
- CPU
- i7-8700K
- Graphics
- RX 580
- Mac
- Mobile Phone
Hello,
I finaly managed to boot my workstation hackintosh on High Sierra .6, now having some problems with performance and Multi-display capabilities.
1. Quadro P2000 performance is lacking in macOS
I currently dual boot since my Hackintosh is not yet complete and I did Geekbench OpenGL test on both OS (Windows 10 and MacOS 10.13.6).
Windows scored ~110.000 and macOS "only" ~80.000. I installed the latest NVIDIA WebDrivers. MacOS CPU score on the other hand is a bit better than in Windows.
Any idea?
__
2. I have some multi display problems with my Quadro P2000
Booting with 2 monitors works fine in Windows but it works strangely in macOS.
When I am booting from clover and all of the -verbose logs are shown on my main QHD display and when it boots only the second display shows up with blank main monitor - no signal error.
OS detects both monitors correctly - Monitor name, display resolution and all. Both monitors are connected via display port.
If I switch either monitor off and try to boot without one, same problem occurs. Second monitor is fine while my main monitor shows blank screen with an error - no signal. Even if I hotplug them while already booted nothing happens.
I have tried several restarts, uninstalls of webdrivers, reinstalls of kexts (lilu, green-something...,..) without success.
Booting from Intel GPU (while monitors are connected to eGPU display ports) works fine and both monitors work fine so there must be something wrong with either drivers/kexts or GPU itself.
Thanks!
I finaly managed to boot my workstation hackintosh on High Sierra .6, now having some problems with performance and Multi-display capabilities.
1. Quadro P2000 performance is lacking in macOS
I currently dual boot since my Hackintosh is not yet complete and I did Geekbench OpenGL test on both OS (Windows 10 and MacOS 10.13.6).
Windows scored ~110.000 and macOS "only" ~80.000. I installed the latest NVIDIA WebDrivers. MacOS CPU score on the other hand is a bit better than in Windows.
Any idea?
__
2. I have some multi display problems with my Quadro P2000
Booting with 2 monitors works fine in Windows but it works strangely in macOS.
When I am booting from clover and all of the -verbose logs are shown on my main QHD display and when it boots only the second display shows up with blank main monitor - no signal error.
OS detects both monitors correctly - Monitor name, display resolution and all. Both monitors are connected via display port.
If I switch either monitor off and try to boot without one, same problem occurs. Second monitor is fine while my main monitor shows blank screen with an error - no signal. Even if I hotplug them while already booted nothing happens.
I have tried several restarts, uninstalls of webdrivers, reinstalls of kexts (lilu, green-something...,..) without success.
Booting from Intel GPU (while monitors are connected to eGPU display ports) works fine and both monitors work fine so there must be something wrong with either drivers/kexts or GPU itself.
Thanks!