Contribute
Register

AzureWave NB037H (WiFi+BT Combo) with Kext

Status
Not open for further replies.
I installed the kext to my Dell Latitude E6420 running Yosemite 10.10.1 with kextwizard. nothing happend - card does not show up. Do i have to modify the DSDT or what i have to do get it running?
card is AzureWave AW-NB037H.

Does your bluetooth controller show on the USB bus? (System Information -> USB)
 
....i am not sure what it tells....

USB Hi-Speed Bus:


Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0004
PCI Vendor ID: 0x8086
Bus Number: 0x1a


Hub:


Product ID: 0x0024
Vendor ID: 0x8087 (Intel Corporation)
Version: 0.00
Speed: Up to 480 Mb/sec
Location ID: 0x1a100000 / 2
Current Available (mA): 500
Current Required (mA): 0
Built-In: Yes


DW375 Bluetooth Module:


Product ID: 0x8187
Vendor ID: 0x413c (Dell Inc.)
Version: 5.17
Serial Number: 08EDB9DDBC0C
Speed: Up to 12 Mb/sec
Manufacturer: Dell Computer Corp
Location ID: 0x1a140000 / 4
Current Available (mA): 500
Current Required (mA): 100
Built-In: Yes
 
...


DW375 Bluetooth Module:


Product ID: 0x8187
Vendor ID: 0x413c (Dell Inc.)
Version: 5.17
Serial Number: 08EDB9DDBC0C
Speed: Up to 12 Mb/sec
Manufacturer: Dell Computer Corp
Location ID: 0x1a140000 / 4
Current Available (mA): 500
Current Required (mA): 100
Built-In: Yes

That device-id is not supported by my version of IOath3kfrmwr.kext.
 
now i notice it's a DEll device. so, i have to manually remove it. it seems that Qualcomm Atheros is not recognized.
This AzureWave AW-NB037H works under Win and also it worked in my old HP Probook hackintosh, but i cannot find the kext for it anymore.... probably it was inside of the hackintosh Probook installer. how to check it out what kext it was?

ANYWAY, i removed the DEll bluetooth whatever and now theres only:
USB Hi-Speed Bus:


Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x1c2d
PCI Revision ID: 0x0004
PCI Vendor ID: 0x8086
Bus Number: 0x1a


Hub:


Product ID: 0x0024
Vendor ID: 0x8087 (Intel Corporation)
Version: 0.00
Speed: Up to 480 Mb/sec
Location ID: 0x1a100000 / 2
Current Available (mA): 500
Current Required (mA): 0
Built-In: Yes


Laptop_Integrated_Webcam_FHD:


Product ID: 0x2802
Vendor ID: 0x1bcf (Sunplus Innovation Technology Inc.)
Version: 1c.09
Speed: Up to 480 Mb/sec
Manufacturer: CN0CJ3P272487246A7NGA02
Location ID: 0x1a150000 / 3
Current Available (mA): 500
Current Required (mA): 500
Built-In: Yes
 
I have Yosemite 10.10.2 and AzureWave NB037H Wifi found, but can't connect to any of networks. Bluetooth hardware can't found. I download sources from first post in topic. Xcode compiler has been set to 10.10 latest, project was be builded and kext installed... but nothing happen. After several reboot , BT module run but can't found any device around. After next reboot, module gone. What I do wrong? Please help. Thanks.:crazy:

Could you please share the kext you’ve build? For some reason building fails for me every single time. I want to get Bluetooth enabled cause I’ve already managed to get WiFi fully functional using ATH9KFixup.kext and AirPortAtheros40.kext.


If anyone else also would be so kind to build the kext from the first post I would really appreciate that.
 
Could you please share the kext you’ve build? For some reason building fails for me every single time. I want to get Bluetooth enabled cause I’ve already managed to get WiFi fully functional using ATH9KFixup.kext and AirPortAtheros40.kext.


If anyone else also would be so kind to build the kext from the first post I would really appreciate that.
Too much time gone. But I have this card in trash box. I can get it at anytime and exchange it in my hackbook. So, if you want do some test, please feel free to ping me.
 
Status
Not open for further replies.
Back
Top