AW-CE123H doesn‘t work in hp 9470m sierra

[machief111]

I installed sierra on my hp 9470m about 1 year ago, recently, I switched the wifi card to AW-CE123H.
(I was using BCM4322 before, wifi works fine although it does not support bluetooth)

After that I find:

• 1. Although bt can detect devices, but it takes forever to connect. It almost fails all the time.
• 2. Wifi just simply don't work.

Then I followed this blogger. https://shuiqingliu.com/2017/06/12/How-to-driver-BCM94352-on-MacOS-Sierra-12-5/

Installed the kexts, rebuild the caches and revised the plist. Things didn’t get better, wifi and bt still are unable to work.

What should I do, did I miss something? I have attached all the problem report files below. Can someone help?

 

[Feartech]

I installed sierra on my hp 9470m about 1 year ago, recently, I switched the wifi card to AW-CE123H.
After that I find:

• 1. Although bt can detect devices, but it takes forever to connect. It almost fails all the time.
• 2. Wifi just simply don't work.

Then I followed this blogger. https://shuiqingliu.com/2017/06/12/How-to-driver-BCM94352-on-MacOS-Sierra-12-5/

Installed the kexts, rebuild the caches and revised the plist. Things didn’t get better, wifi and bt still are unable to work.

What should I do, did I miss something? I have attached all the problem report files below. Can someone help?

all kexts belong in /Library/Extensions

and keep essential kexts in clover/kexts/other

there will be an overlap of kexts in both places which is fine

also config.plist:
InjectKexts->Detect

(and make sure fast boot is off in BIOS)

 

[machief111]

all kexts belong in /Library/Extensions

and keep essential kexts in clover/kexts/other

there will be an overlap of kexts in both places which is fine

also config.plist:
InjectKexts->Detect

(and make sure fast boot is off in BIOS)

I used kext wizard to install all the kexts, is there a better way for installation?

 

[Feartech]

I used kext wizard to install all the kexts, is there a better way for installation?

As per rules, please update your hardware profile to allow others to help you easier
https://www.tonymacx86.com/account/

also your laptop has a guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.261719/

 

[machief111]

As per rules, please update your hardware profile to allow others to help you easier
https://www.tonymacx86.com/account/

also your laptop has a guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.261719/

OK, I will try to follow the guide, and thanks for informing about the hardware info. This is my first post, and I should say, long way to go.

 

[RehabMan]

I installed sierra on my hp 9470m about 1 year ago, recently, I switched the wifi card to AW-CE123H.
(I was using BCM4322 before, wifi works fine although it does not support bluetooth)

After that I find:

• 1. Although bt can detect devices, but it takes forever to connect. It almost fails all the time.
• 2. Wifi just simply don't work.

Then I followed this blogger. https://shuiqingliu.com/2017/06/12/How-to-driver-BCM94352-on-MacOS-Sierra-12-5/

Installed the kexts, rebuild the caches and revised the plist. Things didn’t get better, wifi and bt still are unable to work.

What should I do, did I miss something? I have attached all the problem report files below. Can someone help?

Your files are not up-to-date with respect to the guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.261719/