Contribute
Register

Audio - HDMI Audio AppleHDA [Guide]

Status
Not open for further replies.
My mistake, pullled. Download 0.6, reply with new files.

You did it again my man, thank you very much :)

File: audio_cloverHDMI-130_v0.6.command
Release Mode
EFI partition is mounted
HDMI audio codec(s)
Intel: 0x8086280b
HD630 HDMI audio is enabled, connector edit may be required
Verify HD630 HDMI audio connector/s (y/n): y
One display connected, proceeding
Confirm DP to HDMI connector edit on port 0x6 (y/n): y
Patch port 0x6
Download HD630 HDMI audio connector edits ...
Password:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2353 100 2353 0 0 13862 0 --:--:-- --:--:-- --:--:-- 13841
HDMI audio edited /Volumes/EFI/EFI/CLOVER/config.plist installed
Install AMD/Nvidia HDMI audio (y/n): n

Install finished, restart required.
Cubi2_Plus_HDMI.png
 
Description of audio problem
HDMI audio on GTX 1050 Ti not working, script detects and no longer detects card at PEGP@3
audio_cloverHDMI-120_v1.0f3.command detects, applies patch, no HDMI audio (Worked on Yosemite for GTX660)

OS X version/motherboard model/BIOS version/processor/graphics
10.12.6 / GA-P55A-UD3 / F11 / i7-860 / Gigabyte GTX 1050 Ti G1

Procedure/Guide used
opened audio_cloverHDMI-130_v0.5.command followed on-screen prompts

Terminal/Shell/File/Export Text As. . . (if run)
See attached .txt file in zip

Copy of IOReg - IOReg_v2.1/File/Save a Copy As…, verify file (Tools 1.)
See attached .ioreg file in zip

Copy Of Console/All Messages (last boot)/File/Save a Copy As..
N/A script failed to detect at the slot

DPCIManager/Status (Tools 2.)
Went to download, saw warning of malware detected, avoided.

Terminal/Shell/File/Export Text As. . . (if run
See attached .txt file in zip

Clover (if installed)
Clover folder in zip, includes SSDT made by audio_cloverHDMI-120_v1.0f3.command, DSDT, config

Also to be noted recently installed the latest audio_cloverALC-130_v0.3.command which worked fine, made the DSDT edits recommended in the [Guide]-Add_or_Edit_HDEF-dsdt.pdf to try and clean up my audio, it gets static and garble noises with the DSDT I am currently working on.

Hopefully the information provided is sufficient, if you really need a DPCIManager output please provide a known clean version as I am looking for it already.

Got the script to run by changing PEGP1 to PEGP3, everything in the troubleshooting guide is injected, but still no HDMI audio present in the Sound settings.

Upgraded to 10.13

Tried unplugging it and back in, no audio listed for it, everything appears to be working otherwise.
 
Last edited:
do not know why it is now PEGP
Terminal output says the script did not run.
The installed HDMI audio ssdt is working.
Nvidia 10xx/Web drivers, no HDMI audio on the HDMI port after boot. DP and/or DVI audio may work with a HDMI adapter.
 
Last edited:
maybe there is something I missed
IOReg shows the correct ACPI edits.
The AMD HDMI audio controller device_id is not recognized by AppleHDAController.kext.
Something very strange, the graphics card device _id, 67b0 is showing up as the HDMI audio controller device_id instead of aac8. aac8 would work, 67b0 newer will.No suggestions at this time.
 
Terminal output says the script did not run.
The installed HDMI audio ssdt is working.
Nvidia 10xx/Web drivers, no HDMI audio on the HDMI port after boot. DP and/or DVI audio may work with a HDMI adapter.

So try the DP ports?

Any possibility of getting audio on HDMI working?
 
Yes. Try DVI as well

Contact Nvidia.
If DP works, get a DP2HDMI adapter; same with DVI.

Luckily I already have a DP2HDMI laying around, what's strange is your script seems to install the SSDT fine if I change inform it of the location of the card, but previous installs had the card at PEG0@3.

Perhaps a DSDT change is at fault here, but it is confusing the HDMI audio doesn't work.

Testing the DP2HDMI now without the SSDT and no audio, will update after a reboot and placing the SSDT from the modified script back into Clover.

DP2HDMI works, I have audio there :)
 
Last edited:
Status
Not open for further replies.
Back
Top