Contribute
Register

Audio - HDMI Audio AppleHDA [Guide]

Status
Not open for further replies.
not able to compile.
So no port 5, 6 or 7, which patch should I apply ?
No way to fix a dsdt with complier error messages. Save dsdt as Format: Disassembled ASL file and attach.
The display is on AppleIntelFramebuufer@2, Port 0x7; use azul-a patch.
 
Thanks toleda,

I had to re-install the system as I wasn't able to boot it anymore.

Here is my dsdt before to apply the patch.

Thanks for your help :)View attachment system.zip

PS I had to compress it or it wasn't fitting the files system of the forum.
 
I had to re-install the system as I wasn't able to boot it anymore.
Installing a text file into a system folder fails every time. Install only compiled binaries. If you remove wrong dsdt file, reinstall is not necessary.
Remove the "I' as the first character in your attached dsdt file.
The guide says apply 2 patches, what patches did you apply?
 
Hi Toleda,

Started everything from the start,

I've applied the patches: AMI-Clean_Compile-9Series and AMI-HD4600-AMD-Nvidia-A1 and I've one error when doing the compilation:

Code:
6/3/15, 7:05:03 PM, iASLByyO7A.dsl(13768) : Error    4057 - Name already exists in scope (_DSM)
6/3/15, 7:05:03 PM, iASLByyO7A.dsl(14769) : Warning  1099 - Unknown reserved name (_WDG)
6/3/15, 7:05:03 PM, iASLByyO7A.dsl(14955) : Warning  1099 - Unknown reserved name (_WED)
6/3/15, 7:05:03 PM, iASLByyO7A.dsl(14955) : Warning  1099 - Unknown reserved name (_WED)
6/3/15, 7:05:03 PM, iASLByyO7A.dsl(14955) : Warning  1099 - Unknown reserved name (_WED)
6/3/15, 7:05:03 PM, iASLByyO7A.dsl(15749) : Warning  1088 - Not all control paths return a value (_HID)
6/3/15, 7:05:03 PM, iASLByyO7A.dsl(15749) : Warning  1081 - Reserved method must return a value (Integer/String required for _HID)
6/3/15, 7:05:03 PM, ASL Input:  iASLByyO7A.dsl - 16322 lines, 555493 bytes, 6749 keywords
6/3/15, 7:05:03 PM, Compilation complete. 1 Errors, 8 Warnings, 0 Remarks, 64 Optimizations


Also coming back to the pdf regarding the Step 1:
Code:
[COLOR=#1A1A1A][FONT=Verdana]Step 1: HD4600 HDMI Audio kext edits
[/FONT][/COLOR][COLOR=#1A1A1A][FONT=Verdana]1. AppleHDA.kext (select one) [/FONT][/COLOR]
which one should I use in all the list and where I can find it ?

For the Step 2 which is the patching since I'm using version 10.10.3, I don't need to do the step 4 and 5 right ?

Thanks a lot for your help :)
 
I've one error
which one should I use in all the list and where I can find it ?
For the Step 2 which is the patching since I'm using version 10.10.3, I don't need to do the step 4 and 5 right ?
2nd request; error log is useless, attach dsdt with error.
With the exception of MultiBeast (Downloads - tonymacx86.com), each choice has link.
Correct.
 
Hi Toleda,

Here is my patched dsdt which I can't compile View attachment DSDT_patched.zip

For step 1 I copy from the multibeast the file AppleHDA-887_v100302.pkg and I've downloaded the file graphics_intel_hd5k-azul-a-90_patch.command

What is the way to patch this file and to replace my actual AppleHda with it ?

Thanks again for all your efforts
 
my patched dsdt which I can't compile

For step 1 I copy from the multibeast the file AppleHDA-887_v100302.pkg and I've downloaded the file graphics_intel_hd5k-azul-a-90_patch.command

What is the way to patch this file and to replace my actual AppleHda with it ?
See Post #482
Use MultiBeast to install 887 audio
No idea what is the correct azul patch, attach IOReg.
 
@ toleda hey man,i would like to ask you something.So,all i did to get HDMI audio on my hack was to place SSDT-1 you provide on EFI partition (Clover install)as per instructions (that was way too easy,thanx!).My question is,editing the SSDT-1,can i get dual HDMI audio outputs as i have 2 cards in my build?Currently,only the top card (the one closer to CPU) gets HDMI audio.thank you again.
 
Status
Not open for further replies.
Back
Top