AUDIO DRIVERS FOR HIGH SIERRA

[Franci01]

HI, as you can see I own an Asus z170-plus and I've just installed high Sierra. Can you tell me witch are the right kexts I have to install? if there aren't kexts how can I do??
thanks

 

[Aerz]

Please, move this post to Post Installation > Audio forum. This section is incorrect and you maybe won't get support.

Regards!

 

[Feartech]

HI, as you can see I own an Asus z170-plus and I've just installed high Sierra. Can you tell me witch are the right kexts I have to install? if there aren't kexts how can I do??
thanks

moved to audio

read the stickies:
https://www.tonymacx86.com/forums/audio.14/

 

[Aerz]

Actually the best way to get audio works is use AppleALC + Lilu kexts from vit9696.

According with your MOBO, you have Realtek ALC887. So, first, download the kexts:

https://github.com/vit9696/AppleALC/releases/download/1.2.0/1.2.0.RELEASE.zip
https://github.com/vit9696/Lilu/releases/download/1.2.0/1.2.0.RELEASE.zip

Put these .kext on /EFI/EFI/CLOVER/Kexts/Others (Use EFI Mounter to see EFI partition). Now open the file /EFI/EFI/CLOVER/config.plist with Clover Configurator and on the tab "Devices" write in Audio -> Inject the layout watching the supported list here. In your case, start trying layout 1. Save, reboot and test the audio.

 

[Franci01]

Actually the best way to get audio works is use AppleALC + Lilu kexts from vit9696.

According with your MOBO, you have Realtek ALC887. So, first, download the kexts:

https://github.com/vit9696/AppleALC/releases/download/1.2.0/1.2.0.RELEASE.zip
https://github.com/vit9696/Lilu/releases/download/1.2.0/1.2.0.RELEASE.zip

Put these .kext on /EFI/EFI/CLOVER/Kexts/Others (Use EFI Mounter to see EFI partition). Now open the file /EFI/EFI/CLOVER/config.plist with Clover Configurator and on the tab "Devices" write in Audio -> Inject the layout watching the supported list here. In your case, start trying layout 1. Save, reboot and test the audio.

Actually the best way to get audio works is use AppleALC + Lilu kexts from vit9696.

According with your MOBO, you have Realtek ALC887. So, first, download the kexts:

https://github.com/vit9696/AppleALC/releases/download/1.2.0/1.2.0.RELEASE.zip
https://github.com/vit9696/Lilu/releases/download/1.2.0/1.2.0.RELEASE.zip

Put these .kext on /EFI/EFI/CLOVER/Kexts/Others (Use EFI Mounter to see EFI partition). Now open the file /EFI/EFI/CLOVER/config.plist with Clover Configurator and on the tab "Devices" write in Audio -> Inject the layout watching the supported list here. In your case, start trying layout 1. Save, reboot and test the audio.

thank you very much

 

[Franci01]

Actually the best way to get audio works is use AppleALC + Lilu kexts from vit9696.

According with your MOBO, you have Realtek ALC887. So, first, download the kexts:

https://github.com/vit9696/AppleALC/releases/download/1.2.0/1.2.0.RELEASE.zip
https://github.com/vit9696/Lilu/releases/download/1.2.0/1.2.0.RELEASE.zip

Put these .kext on /EFI/EFI/CLOVER/Kexts/Others (Use EFI Mounter to see EFI partition). Now open the file /EFI/EFI/CLOVER/config.plist with Clover Configurator and on the tab "Devices" write in Audio -> Inject the layout watching the supported list here. In your case, start trying layout 1. Save, reboot and test the audio.

is it ok? it seems to me but audio is still not working

 

[Aerz]

Check if Lilu and AppleALC kexts are loaded:

kextstat |grep "AppleALC"

kextstat |grep "Lilu"

If the result of these commands are empty, something are wrong.

Then, try all the supported layouts for you: 1, 2, 3, 5, 7, 11, 13, 17, 18, 33, 99