Contribute
Register

ASUS ZENBOOK UX305UA Can't Boot Help me please

Status
Not open for further replies.
nutss

nutss

Joined
Jun 11, 2011
Messages
14
Motherboard
10.8
CPU
Intel Core2 Duo
Graphics
8400GS
Mac
  1. MacBook Pro
Classic Mac
  1. 0
Mobile Phone
  1. iOS

Attachments

  • config.plist
    5.1 KB · Views: 287
nutss said:
ASUS ZENBOOK UX305UA
CPU: Intel Core i7 6500U 2.5GHz Dual Core Processor (4M Cache, up to 3.1GHz) (skylake)
Chip : Intel HM170 Chipset
RAM : 8GB
SSD : 256 GB
GRAPHIC : Intel HD Graphics 5500

http://www.pcmarket.com.au/shop/asu...06t-intel-core-i7-6500u-133-full-hd-ultrabook

i create USB Boot and config clover
it not boot
it reboot

Help me please
Click to expand...

Read about Skylake: http://www.tonymacx86.com/desktop-compatibility/176407-testing-thread-skylake-platform-os-x.html

http://www.tonymacx86.com/laptop-compatibility/106791-laptop-compatibility.html

And laptop FAQ: http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Keep in mind Skylake graphics are a no-go at the moment.
 

Attachments

  • 12920352_1238410466169168_6048900561325982929_n.jpg
    12920352_1238410466169168_6048900561325982929_n.jpg
    34 KB · Views: 316
nutss said:
i boot usb 10.11.4 clover
but can't install becuase not have sad disk 256 gb
please help me
Click to expand...

Post output of 'lspci -nn' in Linux Terminal.

Post EFI/Clover folder as ZIP (omit 'themes' folder).

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
RehabMan said:
Post output of 'lspci -nn' in Linux Terminal.

Post EFI/Clover folder as ZIP (omit 'themes' folder).

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
Click to expand...



Mobo: ASUS ZENBOOK UX305UA (Clover)
CPU: Intel i7-6500U (SKYLAKE-U/Y) @2.5GHz
Graphics: Intel HD Graphic 520


Post output of 'lspci -nn' in Linux Terminal.
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1904] (rev 08)
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)
00:04.0 Signal processing controller [1180]: Intel Corporation Device [8086:1903] (rev 08)
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:9d2f] (rev 21)
00:14.2 Signal processing controller [1180]: Intel Corporation Device [8086:9d31] (rev 21)
00:15.0 Signal processing controller [1180]: Intel Corporation Device [8086:9d60] (rev 21)
00:15.1 Signal processing controller [1180]: Intel Corporation Device [8086:9d61] (rev 21)
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:9d3a] (rev 21)
00:17.0 SATA controller [0106]: Intel Corporation Device [8086:9d03] (rev 21)
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:9d10] (rev f1)
00:1c.5 PCI bridge [0604]: Intel Corporation Device [8086:9d15] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d48] (rev 21)
00:1f.2 Memory controller [0580]: Intel Corporation Device [8086:9d21] (rev 21)
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:9d70] (rev 21)
00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:9d23] (rev 21)
02:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 59)
 

Attachments

  • CLOVER.zip
    4.6 MB · Views: 174
nutss said:
i copy SATA-100-series-unsupported.kext in folder EFI/Clover/kexts/other/
but ssd 256 gb disk Not shown in disk utility

please help me again
Click to expand...

Post EFI/Clover folder as ZIP (omit 'themes' folder).

Make sure you're injecting kexts with Clover... (check in menu that results from spacebar).

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top