Contribute
Register

Asus Z490-P i5-10400 IGPU VRAM ISSUE High sierra

Status
Not open for further replies.
mkdj77 said:
Hey @Middleman
I encountered this issue
while booting to macos a spinning wheel is appearing,
how to fix this ..
yesterday same thing happened and I had to transfer the mac partition from the laptop
now it's appearing again ..
☹️
how to fix this
can't boot into macos...
it hangs there
View attachment 525796
Click to expand...
@Feartech what could be the reason for this
how to prevent this from happening
 
@Feartech @Middleman
I want to let you know that I got hdmi audio working with IGpu
also dual.monitor over hdmi and DP worked...(my monitor is almost dead now it's showing some issue white lines I'm very sad on that most probably I'll have to get a used/new monitor)
but unfortunately the audio devices are lost
not quite sure what is the problem
So everything almost there
only the audio fix remaining
can you guide me thru audio fix...(including hdmi audio)
also is it possible to get rid of the black screen before the login screen after the boot..
 
mkdj77 said:
@Feartech @Middleman
I want to let you know that I got hdmi audio working with IGpu
also dual.monitor over hdmi and DP worked...(my monitor is almost dead now it's showing some issue white lines I'm very sad on that most probably I'll have to get a used/new monitor)
but unfortunately the audio devices are lost
not quite sure what is the problem
So everything almost there
only the audio fix remaining
can you guide me thru audio fix...(including hdmi audio)
also is it possible to get rid of the black screen before the login screen after the boot..
Click to expand...
read up on AppleALC:
www.tonymacx86.com

An iDiot's Guide To Lilu and its Plug-ins

An iDiot's Guide To Lilu and its Plug-in's Last Update: 22nd Jan 2021 (Add note about OpenCore config.plist modifications) About this Guide Note: This guide was written when Clover was the boot loader of choice as such the config.plist examples in this guide are mostley Clover specific ... if...
www.tonymacx86.com www.tonymacx86.com
 
@Middleman I got my build ready since yesterday evening I haven't had any issue...
but the spinning wheel issue came up so many times till yesterday
(even happened yesterday morning)
what could be the possible reasons for that?
 
mkdj77 said:
@Middleman I got my build ready since yesterday evening I haven't had any issue...
but the spinning wheel issue came up so many times till yesterday
(even happened yesterday morning)
what could be the possible reasons for that?
Click to expand...
need you to upload your zipped EFI folder
 
It's working fine, no bootloops since 2 3 days
the only issue I have is the blinking display (HDMI)
I got a Brand New LED TV as gift.
IGPU 630.
and also grains appearing on screen
the screen blinks and comes back again
randomly...
I'm using iMac 18,1 SMBIOS
please give some tips on fixing the flickers and artifact's
attaching the zipped EFI folder
Thanks @Middleman
looking forward to hear from you
regarding the final fix for my hack
@Feartech check it if possible
 

Attachments

  • asus z490-P EFI.zip
    13.1 MB · Views: 71
Last edited:
mkdj77 said:
It's working fine, no bootloops since 2 3 days
the only issue I have is the blinking display (HDMI)
I got a Brand New LED TV as gift.
IGPU 630.
and also grains appearing on screen
the screen blinks and comes back again
randomly...
I'm using iMac 18,1 SMBIOS
please give some tips on fixing the flickers and artifact's
attaching the zipped EFI folder
Thanks @Middleman
looking forward to hear from you
regarding the final fix for my hack
@Feartech check it if possible
Click to expand...
no need to list your graphics properties twice:

Code: 
<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>AACbPg==</data>
                <key>device-id</key>
                <data>mz4AAA==</data>
                <key>device_type</key>
                <string>Display Controller</string>
                <key>framebuffer-con0-busid</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con0-index</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-pipe</key>
                <data>CgAAAA==</data>
                <key>framebuffer-con0-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con1-busid</key>
                <data>BAAAAA==</data>
                <key>framebuffer-con1-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con1-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con1-index</key>
                <data>AwAAAA==</data>
                <key>framebuffer-con1-pipe</key>
                <data>CAAAAA==</data>
                <key>framebuffer-con1-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con2-busid</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con2-index</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-pipe</key>
                <data>CQAAAA==</data>
                <key>framebuffer-con2-type</key>
                <data>AAQAAA==</data>
                <key>framebuffer-fbmem</key>
                <data>AACQAQ==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-stolenmem</key>
                <data>AAAwAQ==</data>
                <key>framebuffer-unifiedmem</key>
                <data>AAAAgA==</data>
                <key>model</key>
                <string>Intel UHD Graphics 630</string>
            </dict>
      
            <key>PciRoot(0x0)/Pci(0x2,0x0) 1</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>BwCbPg==</data>
                <key>device-id</key>
                <data>mz4AAA==</data>
                <key>framebuffer-con0-busid</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con0-index</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-pipe</key>
                <data>CgAAAA==</data>
                <key>framebuffer-con0-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con1-busid</key>
                <data>BAAAAA==</data>
                <key>framebuffer-con1-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con1-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con1-index</key>
                <data>AwAAAA==</data>
                <key>framebuffer-con1-pipe</key>
                <data>CAAAAA==</data>
                <key>framebuffer-con1-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con2-busid</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con2-index</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-pipe</key>
                <data>CQAAAA==</data>
                <key>framebuffer-con2-type</key>
                <data>AAQAAA==</data>
                <key>framebuffer-fbmem</key>
                <data>AACQAA==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-stolenmem</key>
                <data>AAAwAQ==</data>
            </dict>

also did you generate his lot yourself:
Code: 
<key>PciRoot(0x0)/Pci(0x1C,0x4)/Pci(0x0,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,4/0,0</string>
                <key>device-properties</key>
                <string>4b00000001000000010000003f0000000100000002010c00d041080a0000000001010600041c0101060000007fff0400160000006200750069006c0074002d0069006e0000000500000001</string>
                <key>device_type</key>
                <string>Ethernet controller</string>
                <key>model</key>
                <string>AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion]</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x3)</key>
            <dict>
                <key>device-id</key>
                <data>cKEAAA==</data>
                <key>layout-id</key>
                <data>BwAAAA==</data>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1C,0x7)/Pci(0x0,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,7/0,0</string>
                <key>RM,device-id</key>
                <data>8hUAAA==</data>
                <key>device-id</key>
                <data>8hUAAA==</data>
                <key>device_type</key>
                <string>Ethernet controller</string>
                <key>model</key>
                <string>Intel(R) I225-V</string>
            </dict>
                <key>PciRoot(0x0)/Pci(0x0,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,0,0</string>
                <key>device_type</key>
                <string>Host bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x14,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,20,0</string>
                <key>device_type</key>
                <string>USB controller</string>
                <key>model</key>
                <string>Comet Lake USB 3.1 xHCI Host Controller</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x14,0x2)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,20,2</string>
                <key>device_type</key>
                <string>RAM memory</string>
                <key>model</key>
                <string>Comet Lake PCH Shared SRAM</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x15,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,21,0</string>
                <key>device_type</key>
                <string>???</string>
                <key>model</key>
                <string>Comet Lake PCH Serial IO I2C Controller #0</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x15,0x1)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,21,1</string>
                <key>device_type</key>
                <string>???</string>
                <key>model</key>
                <string>Comet Lake PCH Serial IO I2C Controller #1</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x16,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,22,0</string>
                <key>device_type</key>
                <string>Communication controller</string>
                <key>model</key>
                <string>Comet Lake HECI Controller</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x17,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,23,0</string>
                <key>device_type</key>
                <string>SATA controller</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1B,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,27,0</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>Comet Lake PCI Express Root Port #17</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1C,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,0</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1C,0x4)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,4</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1D,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,29,0</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>Comet Lake PCI Express Root Port #9</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,31,0</string>
                <key>device_type</key>
                <string>ISA bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x4)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,31,4</string>
                <key>device_type</key>
                <string>SMBus</string>
                <key>model</key>
                <string>Comet Lake PCH SMBus Controller</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x5)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,31,5</string>
                <key>device_type</key>
                <string>???</string>
                <key>model</key>
                <string>Comet Lake PCH SPI Controller</string>
            </dict>
or was it from elsewhere? if you did not generate this with hackintool, then remove it
 
Feartech said:
no need to list your graphics properties twice:

Code: 
<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>AACbPg==</data>
                <key>device-id</key>
                <data>mz4AAA==</data>
                <key>device_type</key>
                <string>Display Controller</string>
                <key>framebuffer-con0-busid</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con0-index</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-pipe</key>
                <data>CgAAAA==</data>
                <key>framebuffer-con0-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con1-busid</key>
                <data>BAAAAA==</data>
                <key>framebuffer-con1-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con1-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con1-index</key>
                <data>AwAAAA==</data>
                <key>framebuffer-con1-pipe</key>
                <data>CAAAAA==</data>
                <key>framebuffer-con1-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con2-busid</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con2-index</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-pipe</key>
                <data>CQAAAA==</data>
                <key>framebuffer-con2-type</key>
                <data>AAQAAA==</data>
                <key>framebuffer-fbmem</key>
                <data>AACQAQ==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-stolenmem</key>
                <data>AAAwAQ==</data>
                <key>framebuffer-unifiedmem</key>
                <data>AAAAgA==</data>
                <key>model</key>
                <string>Intel UHD Graphics 630</string>
            </dict>
     
            <key>PciRoot(0x0)/Pci(0x2,0x0) 1</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>BwCbPg==</data>
                <key>device-id</key>
                <data>mz4AAA==</data>
                <key>framebuffer-con0-busid</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con0-index</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-pipe</key>
                <data>CgAAAA==</data>
                <key>framebuffer-con0-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con1-busid</key>
                <data>BAAAAA==</data>
                <key>framebuffer-con1-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con1-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con1-index</key>
                <data>AwAAAA==</data>
                <key>framebuffer-con1-pipe</key>
                <data>CAAAAA==</data>
                <key>framebuffer-con1-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con2-busid</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con2-index</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-pipe</key>
                <data>CQAAAA==</data>
                <key>framebuffer-con2-type</key>
                <data>AAQAAA==</data>
                <key>framebuffer-fbmem</key>
                <data>AACQAA==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-stolenmem</key>
                <data>AAAwAQ==</data>
            </dict>

also did you generate his lot yourself:
Code: 
<key>PciRoot(0x0)/Pci(0x1C,0x4)/Pci(0x0,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,4/0,0</string>
                <key>device-properties</key>
                <string>4b00000001000000010000003f0000000100000002010c00d041080a0000000001010600041c0101060000007fff0400160000006200750069006c0074002d0069006e0000000500000001</string>
                <key>device_type</key>
                <string>Ethernet controller</string>
                <key>model</key>
                <string>AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion]</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x3)</key>
            <dict>
                <key>device-id</key>
                <data>cKEAAA==</data>
                <key>layout-id</key>
                <data>BwAAAA==</data>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1C,0x7)/Pci(0x0,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,7/0,0</string>
                <key>RM,device-id</key>
                <data>8hUAAA==</data>
                <key>device-id</key>
                <data>8hUAAA==</data>
                <key>device_type</key>
                <string>Ethernet controller</string>
                <key>model</key>
                <string>Intel(R) I225-V</string>
            </dict>
                <key>PciRoot(0x0)/Pci(0x0,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,0,0</string>
                <key>device_type</key>
                <string>Host bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x14,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,20,0</string>
                <key>device_type</key>
                <string>USB controller</string>
                <key>model</key>
                <string>Comet Lake USB 3.1 xHCI Host Controller</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x14,0x2)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,20,2</string>
                <key>device_type</key>
                <string>RAM memory</string>
                <key>model</key>
                <string>Comet Lake PCH Shared SRAM</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x15,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,21,0</string>
                <key>device_type</key>
                <string>???</string>
                <key>model</key>
                <string>Comet Lake PCH Serial IO I2C Controller #0</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x15,0x1)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,21,1</string>
                <key>device_type</key>
                <string>???</string>
                <key>model</key>
                <string>Comet Lake PCH Serial IO I2C Controller #1</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x16,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,22,0</string>
                <key>device_type</key>
                <string>Communication controller</string>
                <key>model</key>
                <string>Comet Lake HECI Controller</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x17,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,23,0</string>
                <key>device_type</key>
                <string>SATA controller</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1B,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,27,0</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>Comet Lake PCI Express Root Port #17</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1C,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,0</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1C,0x4)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,28,4</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1D,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,29,0</string>
                <key>device_type</key>
                <string>PCI bridge</string>
                <key>model</key>
                <string>Comet Lake PCI Express Root Port #9</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x0)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,31,0</string>
                <key>device_type</key>
                <string>ISA bridge</string>
                <key>model</key>
                <string>???</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x4)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,31,4</string>
                <key>device_type</key>
                <string>SMBus</string>
                <key>model</key>
                <string>Comet Lake PCH SMBus Controller</string>
            </dict>
            <key>PciRoot(0x0)/Pci(0x1F,0x5)</key>
            <dict>
                <key>AAPL,slot-name</key>
                <string>Internal@0,31,5</string>
                <key>device_type</key>
                <string>???</string>
                <key>model</key>
                <string>Comet Lake PCH SPI Controller</string>
            </dict>
or was it from elsewhere? if you did not generate this with hackintool, then remove it
Click to expand...
ok so which option should I select in hackintool
the all data or the other...
I have used hackintool for clover
but not for opencore
 
mkdj77 said:
ok so which option should I select in hackintool
the all data or the other...
I have used hackintool for clover
but not for opencore
Click to expand...
probably best to remove this one:
Code: 
 <key>PciRoot(0x0)/Pci(0x2,0x0) 1</key>
            <dict>
                <key>AAPL,ig-platform-id</key>
                <data>BwCbPg==</data>
                <key>device-id</key>
                <data>mz4AAA==</data>
                <key>framebuffer-con0-busid</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con0-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con0-index</key>
                <data>AgAAAA==</data>
                <key>framebuffer-con0-pipe</key>
                <data>CgAAAA==</data>
                <key>framebuffer-con0-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con1-busid</key>
                <data>BAAAAA==</data>
                <key>framebuffer-con1-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con1-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con1-index</key>
                <data>AwAAAA==</data>
                <key>framebuffer-con1-pipe</key>
                <data>CAAAAA==</data>
                <key>framebuffer-con1-type</key>
                <data>AAgAAA==</data>
                <key>framebuffer-con2-busid</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-flags</key>
                <data>xwMAAA==</data>
                <key>framebuffer-con2-index</key>
                <data>AQAAAA==</data>
                <key>framebuffer-con2-pipe</key>
                <data>CQAAAA==</data>
                <key>framebuffer-con2-type</key>
                <data>AAQAAA==</data>
                <key>framebuffer-fbmem</key>
                <data>AACQAA==</data>
                <key>framebuffer-patch-enable</key>
                <data>AQAAAA==</data>
                <key>framebuffer-stolenmem</key>
                <data>AAAwAQ==</data>
            </dict>

and the other stuff you can probably remove as it was not from your machine
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top