- Joined
- Dec 17, 2016
- Messages
- 9
- Motherboard
- IWill DJ800
- CPU
- 2x Xeon
- Graphics
- Quadro FX370
- Mac
- Classic Mac
- Mobile Phone
Hi !
First of all I'm french, sorry for bad english...
The laptop is an Asus X70IO :
- Processor T4200 (C2D 2GHZ),
- Memory 4GB DDR2,
- Graphic Card GT120M 1GB,
- Chipset NVidia MCP79D.
- HDD 500go classic (Not SSD)
What I've managed to done :
I've managed to get to the El Capitan installer trough UniBeast 6.2.0 USB Key made.
The first problem encounter was the built-in keyboard and mouse were not working, even with USB keyboard/mouse.
I Got them to work by adding VoodooPS2Controller.kext in "Other" folder, but still no USB keyboard nor USB mouse. Strange by the way because USB Key is working...
Installation starts, continues, finishes, fine then reboot fine but in Clover, no internal HDD (Sata Enhanced mode in BIOS but even in IDE mode).
USB boot via external enclosure OK (but still with no USB keyboard/mouse... very weird!)
Trying several things and 2-3 clean installation later, the solution I've found is the Enoch version of Chameleon (Rev2961).
Now I'm stuck on 3 problems :
- USB devices other than 2.0 don't work at all (USB Key, HDD OK so I suppose USB1.1 is not functional)
- The system boot like charm, but it can't reboot, shutdown properly ( I don't really care about sleep function but it could be cool if so...)
- There is no sound (HDMI is not used at all on this computer)
Is there anyone coud help me ?
Thank's a lot in advance.
Jonathan (Alias Nikko485)
EDIT : Error in post title, the laptop model is X70I0, not K70I0
First of all I'm french, sorry for bad english...
The laptop is an Asus X70IO :
- Processor T4200 (C2D 2GHZ),
- Memory 4GB DDR2,
- Graphic Card GT120M 1GB,
- Chipset NVidia MCP79D.
- HDD 500go classic (Not SSD)
What I've managed to done :
I've managed to get to the El Capitan installer trough UniBeast 6.2.0 USB Key made.
The first problem encounter was the built-in keyboard and mouse were not working, even with USB keyboard/mouse.
I Got them to work by adding VoodooPS2Controller.kext in "Other" folder, but still no USB keyboard nor USB mouse. Strange by the way because USB Key is working...
Installation starts, continues, finishes, fine then reboot fine but in Clover, no internal HDD (Sata Enhanced mode in BIOS but even in IDE mode).
USB boot via external enclosure OK (but still with no USB keyboard/mouse... very weird!)
Trying several things and 2-3 clean installation later, the solution I've found is the Enoch version of Chameleon (Rev2961).
Now I'm stuck on 3 problems :
- USB devices other than 2.0 don't work at all (USB Key, HDD OK so I suppose USB1.1 is not functional)
- The system boot like charm, but it can't reboot, shutdown properly ( I don't really care about sleep function but it could be cool if so...)
- There is no sound (HDMI is not used at all on this computer)
Is there anyone coud help me ?
Thank's a lot in advance.
Jonathan (Alias Nikko485)
EDIT : Error in post title, the laptop model is X70I0, not K70I0
Last edited: