Contribute
Register

Asus X299 - Support

Status
Not open for further replies.
@pieropontra,

Have you updated to 10.15.4? If so, were there any changes in Clover, etc., required moving from 10.15.3?

Thanks!
 
I have Asus ROG Strix X299-E Gaming with 10980XE. I’ve tried multiple EFIs trying to get to the installer, but I keep getting the “do not proceed” symbol. I’ve used KDP’s bios settings on the 2002 bios. I’m about throw on the towel on this. Any ideas out there?
 
@S1lla
Flashed BIOS.
I tried this EFI Folder.
But the boot stops...
Thanks.
IMG_0220.jpeg
 
Bios Settings are set corectly?
Flash process was successful?
Serial port disabled?
 
@S1lla
Flashed BIOS.
I tried this EFI Folder.
But the boot stops...
Thanks.
View attachment 460896
If you patch correctly the bios and use the cascadelakefixe ssdt (search the method in the forum) it’s works. But personnaly i prefered to go back to the 0802 bios. (For x299 deluxe II).
 
Refers to @kgp setting.
I think the flash process was successful because the settings disappeared.
I did it again just in case.
There is no serial port setting item so it is not done.
Thanks.
 
It's possibly that you have to adapt the ssdt for your board. Press F4 in the clover screen, mount the EFI folder of your USB drive and upload the folder EFI/CLOVER/ACPI/Origin here @kusakusa
 
Exprort to Origin.
Is it here?
Thanks.
 

Attachments

  • ROG-STRIX-X299-E-GAMING-II-origin.zip
    190.6 KB · Views: 66
Will take a look on the DSDT as soon as I find some time on the weekend.
 
Status
Not open for further replies.
Back
Top