- Joined
- Apr 28, 2018
- Messages
- 210
- Motherboard
- Asus Dominus Extreme
- CPU
- 3175X
- Graphics
- Radeon VII
- Mac
@kusakusa
I've patched the BIOS for you, insert first the SSDT to your patched folder if you use clover.
Afterwards extract the firmware and put it on an fat32 USB 2.0 stick, attach it to the Flashback Port and Press the flashback button for 3 Seconds and release it after.
The LED should blink for a while, if it stops after 3 times, something is going wrong.
It should blink until the flash process is done and takes some time...
1-2 Minutes is nothing special and as soon as it is done you can boot your system normally.
For a better overview I also attached a picture of the Port which has to be used for it and also the flashback button...
Everything else is usual X299 EFI Configuration.. Nothing special...
I've patched the BIOS for you, insert first the SSDT to your patched folder if you use clover.
Afterwards extract the firmware and put it on an fat32 USB 2.0 stick, attach it to the Flashback Port and Press the flashback button for 3 Seconds and release it after.
The LED should blink for a while, if it stops after 3 times, something is going wrong.
It should blink until the flash process is done and takes some time...
1-2 Minutes is nothing special and as soon as it is done you can boot your system normally.
For a better overview I also attached a picture of the Port which has to be used for it and also the flashback button...
Everything else is usual X299 EFI Configuration.. Nothing special...