- Joined
- Apr 18, 2011
- Messages
- 1,492
- Motherboard
- ASUS Pro WS X299 Sage II
- CPU
- i9-10980XE
- Graphics
- W5500
- Mac
- Mobile Phone
Hello
@ Asus X299 Sage 10G owners
I have this mobo, with a Gigabyte Titan Ridge (thunderbolt 3) and a Radeon VII i(regular dual slots wide GPU)
My case has "only" 7 PCI slots
According to manual I plug the "titan ridge" in the recommended Slot 2 ➧ I can't use Slot 1 for the Radeon VII
View attachment 434280
the block diagram shows (correct me if i'm wrong) that :
- Slot 3 is 8x in my case
- only Slots 5 & 7 are 16x if respectively Slots 4 & 6 are empty ➧ I plug the Radeon VII in Slot 5
I'm planning to buy another dual slot GPU and I realise that I won't fit in on my mobo and my case.
My questions are
Is it possible to put the "titan ridge" in an another slot ?
If not what are the other option ?
Thanks
Unless you don’t care about hot plug no. Needs to be in slot 2 since it’s connected via PCH. Use a vertical riser for a gpu in slot one. Could also try slot 3 and 5 but ASUS recommends slots 1 and 5 for dual gpus